Viacpíla SCM M3 1/26

SCM M3 1/26

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction connection diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, diameter 160 mm Motor power: 15 kW, 400 V, 50 Hz Ledpfx Ajychqzjc Njaf 2nd Unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic sanding belt oscillation Pneumatic conveyor carpet oscillation Motorised workpiece thickness adjustment with LED display in 0.1 mm increments Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star/delta start Complete documentation Notice for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen without any warranty or guarantee. The buyer is free to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stav: použitý, číslo stroja/vozidla: 007984, Max. spracovateľná šírka: 1300 mm Min. spracovateľná hrúbka: 4 mm Pracovný stôl: pevná výška Laedpfx Aswqdbmec Nef Podtlakový pás: áno Počet pracovných agregátov: 4 ks

Stav: takmer ako nový (použitý), Rok výroby: 2019, prevádzkové hodiny: 180 h, Funkcionalita: plne funkčný, celková dĺžka: 8 000 mm, celková šírka: 1 200 mm, celková výška: 1 300 mm, typ vstupného prúdu: Klimatizácia, vstupné napätie: 400 V, výkon: 10 kW (13,60 k), SOEST Universal Surface Line for oiling, staining, lye-treating, patinating, etc. Lodpfx Acjyaiafj Noaf Primarily designed for parquet surfaces with workpiece widths up to 40 cm. 1) RCR-400-L Reverse roller coater, for applying and removing surface products such as oils, stains, lacquers, etc. 2) VP-400-1B-2P-2B buffing machine with one brush, two pad drivers, and another two brushes, for distributing, working-in, or patinating surface media in pores and/or also for removing, spreading, and buffing for various surface finishing effects as required. 3) Accessories: two spare application rollers, unused new material pump, four spare brushes, various buffing pads, and a pneumatic brush cleaning machine. This complete surface processing line is built for professional industrial use, fully equipped with maximum features. Extensive additional accessories included, such as extra rollers and cleaning machines (see photos!). Very robust construction, all drives frequency-controlled (Siemens). Infinitely variable speed control in both forward and reverse directions. Maximum workpiece width approx. 410 mm. The system is in excellent condition, barely used (only approx. 180 operating hours), and is classified as near mint. This surface line served only as an auxiliary line in a parquet production facility and was used for specific surface processing techniques only. Hence, the low total operating hours—this line was used sporadically from 2019 to 2022. Following company downsizing in 2023, the equipment has been in storage and is immediately available—hence still in almost like-new condition! This equipment is no longer required and is therefore being sold. The original purchase price of the line in 2019 was approx. €87,000; the current sales price is negotiable. Viewing is possible by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video is for demonstration purposes only and shows a similar system configuration!)

Stav: nový, Rok výroby: 2024, Pracovná šírka: 600 mm Pracovná výška: 5 mm až 300 mm Minimálna dĺžka obrobku: 250 mm Agregáty: 2 1. Pílový agregát Random System: povrch po pílení 2. Kefa: Tynex, priemer 210 mm Lodpfeupy Spsx Ac Njaf Nastavenie výšky: elektrické Ukazovateľ výšky: digitálny Posuvná rýchlosť: 4 - 14 m/min Výkon motora pílového agregátu: 1,1 kW Výkon motora kefy: 4 kW Výkon motora posuvu: 0,37 kW Dĺžka stroja: 1400 mm Šírka stroja: 1500 mm Výška stroja: 1600 mm Hmotnosť: 700 kg

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, Frézka na parkety Costa Righi model Zefiro 2200 Lasdpfxex Rrqvo Ac Nof Maximálna vzdialenosť medzi vonkajšími kotúčmi: 2200 mm Užitočný priechod obrobku: 2400 mm Zahrnutý pásový podávač + vstupné reťaze Kotúče sú súčasťou dodávky

Stav: nový, Rok výroby: 2026, Motor Elektrický, 30 kW Elektrický, 37 kW Elektrický, 45 kW Rozmery rezu Max. priemer kmeňa 105 cm Max. dĺžka kmeňa 4,5 m (ložisko S) 8,4 m (ložisko L) Do 12 m (na zákazku) Priestor medzi valcami 90 cm Max. šírka rezu (hranoly) 85 cm Výbava rezacej hlavy Zariadenie na automatické nastavenie hrúbky rezu (Setworks) – priemyselný PLC riadiaci systém s automatickým režimom Posuv rezacej hlavy hore/dole – elektrický (servomotor) Posuv rezacej hlavy dopredu/dozadu – elektrický Rameno vodiaceho kolieska pílového plátna – elektrické (ovládané joystickom) Systém čistenia pílového plátna – automatické mazanie olejovou hmlou s pneumatickou podporou Systém napínania pílového plátna – elektricko-hydraulický s akumulátorom tlaku Kôrovací nôž – voliteľný Priemer otvoru na odvod pilín – 150 mm (6") Vlastnosti rezacej hlavy Štyri kamery Systém na odhadzovanie dosiek Ďalšie možnosti – laser Pílový plát Dĺžka 6270 mm Šírka 50 mm 75 mm (štandard) 100 mm 120 mm Lsdpfxezqz T Rj Ac Njaf Vodiace kolieska pílového plátna Priemer 800 mm Typ – bez remeňov Materiál – vypuklé liatinové Výbava ložiska Konštrukcia ložiska Dvojstranný systém vedenia rezacej hlavy Vlastnosti ložiska Pásový dopravník dosiek Tlmiace valčeky Ďalšie možnosti Dopravník, ktorý sa pohybuje s pílou Súprava na manipuláciu s kmeňom Priemyselná hydraulika 1 alebo viac upínacích valcov na dvoch tyčiach 1 alebo viac obojstranných reťazových otáčacích zariadení 2 alebo viac poháňaných vyrovnávacích valcov 2 alebo viac opier Hydraulická jednotka s výkonom 7,5 kW alebo 11 kW

Stav: takmer ako nový (použitý), Rok výroby: 2022, as new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width 300 mm Max. workpiece height 50 mm Membrane pump, max. capacity 18 l/min Frequency converter for variable speed of application roller Frequency converter for variable speed of counter roller Transport belt speed adjustable 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For distributing and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable 3 to 14 m/min Max. working width 300 mm Max. workpiece height 50 mm Pad diameter 300 mm Quick-change system for pads Lodpsx Ah A Ajfx Ac Njaf Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width 300 mm Max. workpiece height 50 mm UV LED output = 12 W/cm² including ventilation fan Kevlar fabric conveyor belt Transport belt speed adjustable 3 to 14 m/min Outfeed conveyor belt Length approx. 2,500 mm Max. working width 300 mm Transport belt speed adjustable 3 to 14 m/min Used Machinery Notice: • Subject to errors in technical specifications and prior sale. • Prices are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected and viewed, without any warranty or guarantee claims. Buyers are welcome to inspect the machines onsite. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and phone number!)

Stav: takmer ako nový (použitý), Rok výroby: 2023, Funkcionalita: plne funkčný, Set pevnej lunety s rolnovými vložkami pro SUI 80 TRENCIN Lasdju Tvdbspfx Ac Njf Kapacita: 210 - 370 mm 365 - 520 mm Dodává se pouze jako sada

Stav: použitý, číslo stroja/vozidla: 007960, Formátovacia kotúčová píla: Stroj 1 a 2 Max. výška panelu: 200 mm Laodpfswl Dnisx Ac Nsf Max. posuvná rýchlosť: 36 m/min Vzdialenosť medzi západkami: 450 mm

Stav: veľmi dobrý (použitý), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE BANDING LINE, max. working width 2,500 mm, equipped with automatic infeed and stacking system, consisting of the following machines: X04004A) Infeed Gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Workpiece Rotating Device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off Saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cutting) Lsdpfx Aslikvhsc Noaf X04004D) Separation Station "BARGSTEDT" X04004E) Double-sided Sizing and Edge Banding Machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling Machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling Machine "WEEKE" Model BST 500 D X04004H) Workpiece Rotating Device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized Belt Transfer "HOMAG" TR 10/70/12 X04004L) Cut-off Saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking Gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA