Hlboké diery vŕtačky

SFT TBM 20-6-1000

Rok výroby: 2002, stav: použitý, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power required 65 kW Machine weight approx. 7,500 kg Space requirement approx. m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing sanding machine Itedpjt Hw Shofx Ahasi Type 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Workpiece height max. approx. 1 – 50 mm Feed speed stepless approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt, Belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive non-woven abrasive available in various qualities, specially designed for deburring and cleaning surfaces, and for rounding radii on workpieces. Also suitable for workpieces with differing heights. Drive approx. 7.5 kW, disc oscillates via motor (2.2 kW) across the full belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Belt speed approx. 11 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 5.) Wet configuration = complete coolant system, comprising band filter unit with integrated pump in machine base, rotary feedthrough at the top of the deburring disc spindle, water return via the vacuum table, as well as water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc., as well as workpiece pressure rollers front and back, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: Good – can be inspected under power Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stav: dobrý (použitý), Rok výroby: 1998, Max. pitch circle diameter external gear: 300 mm Max. pitch circle diameter internal gear: 300 mm Max. external workpiece diameter (equipment): 450 mm Max. module: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – infinitely variable: 130 – 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface – tool spindle: -55 / +300 mm Maximum distance table surface – tool spindle: 200 mm Maximum distance table surface – tool spindle: 350 mm Manual column lateral shift: +/- 25 mm Manual swivel angle of tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 inch Voltage: 400 V Frequency: 50 Hz Max. supply current: 70 A Total power requirement: 48 kW Machine weight approx.: 11 t Floor space required approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for machining of external and internal cylindrical gears, with straight or helical involute toothing, as well as any other profiles feasible by hobbing or shaping processes. The working cycle is controlled by a CNC unit equipped with specialized software for gear cutting operations. Field of application --> The PSA 300 is designed for manufacturing: Ijdpevu E Nusfx Ahasti - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical toothing - Gears with internal helical toothing

Stav: dobrý (použitý), Strediace vŕtanie 2-50 mm Isdpforivlusx Ahaoti Priemer obrobku 8-125 mm Dĺžka obrobku 50-1000 mm Otáčky brúsneho kotúča 13 000-45 000 ot./min Rôzne príslušenstvo MARCELS MASCHINEN AG

Stav: použitý, Rok výroby: 1992, otáčky vretena (min.): 7 500 ot./min, maximálna rýchlosť vretena: 24 000 ot./min, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including REFU HF-converter For example, suitable for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF-converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter for supplying the motor spindles GMN tool spindle, motor-driven grinding spindle The spindles are fully functional, no warranty – year of manufacture approx. 1992 A selection of various grinding spindle shafts / arbors for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request Isdpfx Aol Tn Afehaeti All technical data subject to errors/typos. Sale only within countries of the European Community.

Stav: dobrý (použitý), Rok výroby: 2016, Veľkosť stola: 3000 x 1700 mm, Pojezdy osí X/Y/Z: 3200 x 2100 x 920 mm, Nosnosť stola: 11 000 kg, Vzdialenosť vretena od stola: 164 – 1084 mm, Upínanie vretena: DIN 50, Otáčky vretena: 6000 ot./min., Zásobník nástrojov: 40 pozícií (ATC), Itodpfx Ahewu Dlajaji Ovládanie: Hurco Winmax 5, Odvádzač triesok.

Stav: použitý, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MT 5 Nominal arm reach: 1500 mm Maximum spindle arm reach: 1500 mm (to column) Minimum spindle arm reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19–1900 rpm, 21 steps Feed: 0.047–2 mm/rev., 12 steps Motor power: 11 kW Electrical connection: 380 Volt, 50 Hz, 15 kW - Spindle forward/reverse via hand lever switch - Hydraulic gear shift for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm vertical adjustment - Without coolant system - Machine lamp - Operating instructions Itodpfx Ahelhwr Rsaei Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Stav: použitý, číslo stroja/vozidla: 7979, Priemer stola: 400 mm Itjdjb Ez R Uspfx Ahaoi Stôl s 8 T-drážkami: 12 mm Konštrukčná výška: 175 mm Potrebný priestor: 600 x 450 x 175 mm Hmotnosť: cca 100 kg

Stav: takmer ako nový (použitý), Rok výroby: 2008, ROK : 2008 Maximálny tlak barana : 2000 ton Zdvih barana : 1500 mm Rozmery stola : 5000 x 2380 mm Itedpfsvm Eixex Ahaji Horný prítlačný tlak : 300 ton Zdvih prítlača barana : 200 mm Rýchly zdvih : 220 mm/s Kapacita prítlača : 600 ton Zdvih prítlača : 400 mm Výška nad úrovňou podlahy : 9145 mm Svetlosť medzi stojanmi : 5000 mm Celková hmotnosť : n.d. kg

Rok výroby: 1997, stav: veľmi dobrý (použitý), A well-maintained used cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right/left/30° right: 130/130/105 mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90 mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted. Itjdpfx Ahekfp D Tsaei

Rok výroby: 2019, prevádzkové hodiny: 4 525 h, stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: 12, SÚPRAVA NA KALIBROVANIE (OLUPOVACÍ STROJ NA TYČE) A ROVNAČKA TYČÍ Zariadenie je vo vynikajúcom technickom stave, možnosť odskúšania pod napätím. Kompletne zrekonštruované v roku 2019 (úplne nová mechanika a elektronika) Pracovný rozsah: Ø 20 – Ø 80 mm Dĺžka tyčí: 2,5 – 6,0 m Presnosť opracovania: ISO h9 (možné aj h8) Hĺbka kalibrovania: do 3,5 mm (v závislosti od druhu ocele) Typy ocele: uhlíková, ložisková, pružinová a pod. Posuvná rýchlosť: digitálne nastaviteľná 0,5 – 12 m/min Otáčky rezacej hlavy: až do 1700 ot/min Rezné nástroje: dve sady, každá po 4 nože s automatickým digitálnym nastavením (trojuholníkové a dlhé nože) Automatický nakladací stôl s počítadlom tyčí Podávací valec s motorizovaným nastavením výšky Vstupné tlakové valce – 4 vertikálne valce s reverzným DC motorom Oluovacie zariadenie pozostáva z: - Predné navádzacie zariadenie - Oluovacia hlava so 4 nožmi Itodpswqb Scofx Ahaoi - Zadné navádzacie zariadenie Vozík na vykladanie tyčí Hlavný motor a prevodovka Výstupné lisovacie valce – dvojité Odkladací stôl s motorizovaným nastavením výšky Zberač s počítadlom a automatickým zberom hotových tyčí Hydraulická jednotka – úplne nová Elektrický rozvádzač – nový, dvojmodulový.