Horizontálna vyvrtávačka stolová

Skoda W 200 G

Stav: použitý, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 – 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 – 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 – 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 stages: 1.5 – 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange centre tip angle: 70° Carriages Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 – 300 mm/min Infinitely variable feeds, cross: 0.3 – 120 mm/min Maximum cutting force at carriage: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange centre tip angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first carriage - Copying length: 8500 mm - Max. copying depth in a single pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 – 1000 mm - Max. boring depth in a single pass: 2700 mm Giedpfexddvnsx Aftel At Ks of 200 kp/mm² – max. s = 1.5 mm/rev a = max. chip cross-section 30 mm² at overhang of 1000 mm Chip cross-section decreases with increasing boring depth A taper turning attachment with setting angle up to 8° and max. taper length (in one pass) of 2000 mm, setting accuracy ± 5 minutes. A taper turning attachment with setting angle up to 15° and max. taper length (in one pass) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on spindle head.

Stav: dobrý (použitý), Rok výroby: 1994, CNC špirálový ohýbací stroj, kapacita 50 cm³, min.-max. priemer špirály 500 – 3 500 mm. Godpfx Aoiu Acpjftoil

Stav: pripravené na použitie (použité), Rok výroby: 2010, FPT heavy-duty mobile column boring machine, high-dynamic, with 5-axis support, model SPIRIT 240-M140. Working range: X AXIS: 14,000 mm Y AXIS: 5,000 mm Z AXIS: 2,500 mm Equipped with 2 rotary tables, each with a 50-ton capacity. Automatic tool changer. CNC: Siemens. The machine is fitted with 3 heads: 1 automatic, bi-rotary, millesimal head model TUPCG, 1 automatic heavy-duty milling head model TO144, 1 D’Andrea facing and turning head, working range from diam. 150 to diam. 1600 mm, model U-TRONIC 800. Gisdpowiifhsfx Aftel

Stav: pripravené na použitie (použité), Rok výroby: 2001, CNC frézka TOS TV-1000 A CONTUR Výrobca: Trens Model: MC 100 VA Rok výroby: 2001 Stav: Použité Riadiaca jednotka: Heidenhain TNC 426 Pojazd osi X: 1000 mm Pojazd osi Y: 600 mm Pojazd osi Z: 760 mm Dĺžka stola: 1080 mm Šírka stola: 580 mm Nástrojový menič s 40 pozíciami Upínanie nástrojov podľa ISO 40 Otáčky vretena: 8000 ot/min Celkové rozmery: D 3200 x Š 2100 x V 2900 mm Hmotnosť: 6200 kg Gijdpfohlp Iwjx Aftsl Doprava možná po celom Nemecku a Rakúsku. Príplatok 1000 € Predaj bez záruky.

Stav: použitý, VTL SC 17 CC Vertikálny revolverový sústruh Giedpfx Afexdcxuotjl Špecifikácia: Priemer čelnej dosky: 1450 mm Otočný priemer: 1700 mm Výška sústruženia: 1200 mm Hmotnosť stroja cca: 22 t

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding Gijdpfxsuxfuco Aftel - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula

Rok výroby: 1984, Stav: pripravené na použitie (použité), Rafamet UBB 112/2 Minimálny priemer behúňa kolesa: 700 mm Maximálny priemer behúňa kolesa: 1120 mm Upínacia dĺžka: 540 - 1050 mm Minimálna dĺžka nápravy dvojkolesia: 1640 mm Maximálna dĺžka nápravy dvojkolesia: 2800 mm Maximálna šírka behúňa: 150 mm Giodpfx Afshvml Ietsl Maximálna hmotnosť dvojkolesia: 4000 kg Rýchlosť posuvu suportu: 2000 mm/min Maximálny posuv suportu: 2000 mm/min Výkon hlavného motora: 80 kW Hmotnosť cca: 40000 kg

Stav: dobrý (použitý), Rok výroby: 2012, Funkcionalita: plne funkčný, Schiess CNC vertikálny sústruh s osou C, rok 1992, retrofit v roku 2012 CNC NUM 1060 FLEXIUM 2 pracovné stoly, priemer stola 2000 mm – max. priemer sústruženia 2500 mm – max. rýchlosť stola 201 ot./min – výkon stola 56 kW nosnosť (vrátane stola) 16000 kg pohyblivý priečnik, 12 pozícií: rozteč 50 mm vzdialenosť pod vretenom: min. 795 mm, max. 1345 mm pozdĺžny zdvih suportu (RAM Z) 1000 mm os C: 360 000 pozícií – frézovacie vreteno max. otáčky 1600 ot./min – výkon frézovacieho vretena 22 kW – počet rýchlostí 2 Godoxpqm Rjpfx Afteil zásobník nástrojov: na sústruženie 20 pozícií – na frézovanie 35 pozícií 1 frézovacia hlava WIDAFLEX UTS80 1 frézovacia hlava ISO 50 Renishaw dotyková sonda (na diely) MP 60 Prednastavenie nástrojov – prenosová funkcia: G20/G21 – bez pevného závitovania Dopravník triesok Predné dvere: čiastočné otvorenie M0 / úplné otvorenie

Stav: dobrý (použitý), Rok výroby: 2009, dĺžka posuvu os X: 6 000 mm, dĺžka posuvu osi Y: 3 000 mm, dĺžka posuvu osi Z: 1 500 mm, model regulátora: HAIDENNAIN, dĺžka obrobku (max.): 6 000 mm, šírka obrobku (max.): 2 500 mm, šírka stola: 6 000 mm, dĺžka stola: 2 500 mm, Portálová frézka s pětiosou hlavou Giedpfxovcqybe Aftel

Rok výroby: 1983, Stav: veľmi dobrý (použitý), číslo stroja/vozidla: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition. Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Giedpsd Nb A Nsfx Aftol Draw head holder diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically variable from 1 m/min up to max. 10 m/min Return speed: hydraulically variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the pull bridge. The needle lifter heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system featuring an integrated magnetic belt chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal utilization, installation in a foundation pit is recommended. Draw heads and needle lifters are available on request. The machine can be inspected in our warehouse.