Portálová frézka

Styrotec FS10 ST

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Ovládanie Fanuc 21T Priemer sústruženia 158 mm Obežný priemer nad ložom 340 mm Otáčky 6 000 min⁻¹ 8-pozičný revolver Lrodpfowmzhpex Af Reg Koník 3-čeľusťové skľučovadlo, 2-čeľusťové skľučovadlo, upínacie klieštinové skľučovadlo Upínacie klieštiny Rôznorodé držiaky nástrojov

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-axis Digital Readout by K&C, NEW Geometrically overhauled, with acceptance protocol for tolerances according to new machine standards!! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer’s warranty with manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool programming (200 item memory), taper calculation, radius/diameter switch, quick zero, count direction selection Lsdsvambcepfx Af Rsrg >> Collet chuck system, brand new collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> New Multifix size A with 2 tool holders, NEW >> Bed stop >> Electric chuck guard, NEW >> LED machine lamp, NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. The slideways have been newly ground or hand-scraped. Acceptance according to inspection protocol. A very fine machine with electronic spindle protection. Accessories such as collets, chuck, and Multifix quick-change toolpost are all new. Spindle, spindle nuts, bearings, belts, and wipers have been replaced. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Rok výroby: 1981, Funkcionalita: plne funkčný, Vybavenie: Lredpfer D N Eqox Af Rog 1 posuvný podávač vpravo 1 excentrický lis 250 kN 4 normálne posuvné agregáty 1 úzky posuvný agregát Pracovný rozsah: Priemer drôtu: do 6,0 mm Šírka pásu: do 80 mm Vodiaca dĺžka: do 520 mm Výkon: 10 - 250 ks/min.

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, First commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Ledpfxow Rl S Se Af Rsrg Dimensions, Weights Space requirement for machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Machine condition Fully functional, very good condition. The machine remains powered and is immediately available.

Stav: použitý, Rok výroby: 2017, číslo stroja/vozidla: 119, No. 24217 Technical Data: Lredetpnplopfx Af Reg - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Bending angle presettable - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Space requirement approx.: W 3900 x H 1550 x D 1200 mm - Weight approx.: 4500 kg

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Použitý veľkoformátový CNC vysekávací lis Trumpf 500R s hĺbkou otvoru 1600 mm na predaj TRUMPF TRUMATIC T500R veľkoformátový rotačný CNC vysekávací lis na predaj Tento stroj spracuje plech s rozmermi 3 metre x 1,5 metra bez opätovného polohovania. Špecifikácia pre britský trh Trumpf: Značka: TRUMPF Model: TRUMATIC 500R Typ: CNC vysekávací stroj Riadenie: Bosch CC220 Vysekávacia sila (t): 22 Vhodný pre použitie viacerých nástrojov (multi-tool) TRUMPF TC 500R revolverový vysekávací stroj 3000 x 1500 mm, veľkoformátové prevedenie 1600 mm hĺbka otvoru x 3-metrové vodiace lišty. Lredstltl Hjpfx Af Reg TRUMPF TRUMATIC 500 CNC vysekávačka s riadením a vzduchovým stolom Kapacita: 220 kN Výrobné číslo: Rok výroby: 1999

Stav: veľmi dobrý (použitý), Fixed-bed milling machine Zayer model KF 3000 with Heidenhain 355 CNC, equipped with external computer for CAD/CAM, table size 3000mm x 1000mm, travel: longitudinal 2700mm, cross 1250mm, vertical 1000mm, rapid traverses 15,000mm/min, Huron-type head ISO 50, 3-range variable spindle speeds up to 3,000 rpm, Huron head recently overhauled with replacement of gear pair and all head bearings, power 30kW, table load capacity 10,000kg, machine in good condition, machine weight 25 tons. Ljdpfxjvdv Tcs Af Rorg

Stav: veľmi dobrý (použitý), Rok výroby: 2014, First commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine powered on: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Ledpfx Afswywcie Rerg Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Rapid traverse speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Required installation space (machine incl. peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with band filter system - 50-slot chain tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra charge: - Renishaw RMP60 wireless probe - BLUM Control NT Machine condition Fully functional, in very good condition and still under power for inspection on site! Images are example photos from a new machine of this type. Original images will follow shortly!

Stav: pripravené na použitie (použité), Rok výroby: 2002, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 2 000 mm, zdvih osi Y: 1 250 mm, zdvih osi Z: 650 mm, celková dĺžka: 6 500 mm, dĺžka stola: 2 000 mm, šírka stola: 1 000 mm, celková šírka: 3 600 mm, maximálna rýchlosť vretena: 12 000 ot./min, celková výška: 4 000 mm, celková hmotnosť: 14 000 kg, Výbava: otáčky plynule nastaviteľné, Retrofitovaná frézka v roku 2024 CNC: TNC 530 HEIDENHAIN Vzdialenosť medzi stojanmi: 1250 mm Hlava: HSK 63 elektromandrin, 12 000 ot./min Opláštenie: Integrované Lrodpfsul Txzsx Af Rog

Stav: veľmi dobrý (použitý), Rok výroby: 2016, pojazdová vzdialenosť osi X: 2 400 mm, zdvih osi Y: 1 500 mm, zdvih osi Z: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2 400/1 500/810 mm Dodatočne namontovaná 4. os 12 000 ot/min, 40 kVA, pojazdové dráhy Hmotnosť 7 800 kg Stôl s vákuovou platňou so systémom odsávania BORNEMANN 960 Lsdpfx Afoq Rcu Ej Rerg