Thommen PR17 CNC

Thommen PR17 CNC

Stav: použitý, Rok výroby: 1988, prevádzkové hodiny: 30 000 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 20992, Vážený pán / Vážená pani, máme pre Vás možnosť ponúknuť vákuovú pec IPSEN VTTC-324 z roku 1988. Charakteristika vákuovej pece: Sn = 165 kVA Un = 400 V, 50 Hz In = 240 A Využiteľné rozmery: 450 mm x 600 mm x 900 mm Výkon ohrievačov = 120 kW Napätie ohrievačov = 43 V, 50 Hz Prúd ohrievačov = 1613 A Teplotný rozsah = 350 - 1320°C Absolútne vákuum = 1 x 10^-5 (difúzna výveva) Absolútny tlak = 5 bar Súčasťou pece je aj veľké množstvo náhradných dielov a príslušenstva na tepelné spracovanie (zásobník na plyn, ohrievače, množstvo regulátorov, nabíjačky a ďalšie príslušenstvo). V prípade záujmu alebo akýchkoľvek otázok ma prosím kontaktujte. Iajdpowah R Refx Agtsl

Stav: takmer ako nový (použitý), Rok výroby: 2013, Funkcionalita: plne funkčný, celková výška: 7 385 mm, celková šírka: 1 471 mm, celková dĺžka: 3 275 mm, 8 Kardex Megamat RS 350 vertikálnych karuselov vo vynikajúcom stave. Inštalácia zahŕňa 8 jednotiek vyrobených v rokoch 2013 až 2018. Iajdsv Svmrspfx Agtjl Dostupné v troch výškových variantoch: 7 185 mm, 7 384 mm a 7 585 mm. Každý vertikálny karusel je vybavený 34, 35 alebo 36 zásuvkami. Pre viac informácií alebo v prípade otázok nás neváhajte kontaktovať.

Stav: použitý, Rok výroby: 2006, x-axis travel: 600 mm y-axis travel: 400 mm z-axis travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Maximum table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Maximum torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse x/y/z: 20,000 mm/min Iedpfev Az Ucex Agtjal Feed rate: 1 - 20,000 mm/min Incremental feed rate: 15 steps / 0 - 1,260 mm/min Number of tool magazine positions: 40 Maximum tool width: 80 mm Maximum tool diameter with adjacent pockets empty: 125 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space required approx.: 2.8 x 3.0 x 2.9 m Vertical Machining Center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Rok výroby: 1971, Stav: pripravené na použitie (použité), číslo stroja/vozidla: 713406, -KOM 105- Offered here is a powerful high-performance grinding machine from Kehren & Co, complete with a paper band filtration unit by FAUDI. This is a segment grinding machine featuring a vertical grinding spindle. The machine is equipped with 2 grinding tables/magnetic chucks for pendulum machining. Technical Data: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with a diameter of 700 mm Grinding method: Segment grinding Control: Marposs Weight: 6,600 kg Paper Band Filtration Unit: Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Year of manufacture: 1992 Iaodeg Nt A Espfx Agtol

Stav: použitý, Rok výroby: 2008, Článok: Vertikálne sústružno-brúsne centrum Značka: EMAG Typ: VSC 250 DS Rok výroby: 2008 Riadenie: SIEMENS 840D Otáčky brúsnej vretena: 30 000 ot./min Otáčky sústružnej vretena: 3 000 ot./min Iodpjia Rtdefx Agtjal Počet nástrojových pozícií v revolveri: 12 Chladič pre chladenie vretena a lôžka stroja Zdvihacia stanica pre chladiacu kvapalinu (bez vlastného systému dodávania chladiacej kvapaliny) Dopravník triesok Manipulácia s dielmi Vzduch cez vreteno Dva upínacie okruhy cez vreteno (vzduch a olej) Brúsna vreteno je bohužiaľ nefunkčné. Dá sa však generálne opraviť v špecializovanej dielni na vretená. Inak je stroj vo veľmi dobrom stave a plne funkčný. Pre viac informácií a fotografie nás prosím kontaktujte e-mailom (at) alebo

Stav: veľmi dobrý (použitý), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel distance – Z axis: 750 mm Lathe bed width: 320 mm Spindle mount: CL 6" Spindle bore: 62 mm Iedped Sitksfx Agtsal Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Quill travel (manual): 200 mm Quill diameter: 80 mm Quill taper: MK 4 (Morse Taper 4)

Stav: nový,

Stav: použitý, Rok výroby: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Iodpfsrw Dknjx Agtsal Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight: approx. 23.6 t Floor space required: approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description: X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT50, Drive power: 22/26 kW, Grid size: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Extended central lubrication (2005), Axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion: 128 Kbytes, Tool correction memory (200 positions), High-Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure through-spindle coolant supply, 20 bar, and zero-point clamping system with 16 pots each.

Stav: generálne opravený (použitý), Rok výroby: 1988,

Rok výroby: 2002, Stav: dielensky repasované (použité), Line for cutting, drilling, and marking beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Downstroke circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical, hardened, and ground gear wheels in an oil bath. - Hydraulic saw blade feed, adjustable according to table, with rapid return. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for angle adjustment from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Saw blade accommodation: 100x4x30x250 mm Iasdpfx Ajhzbipogtel - Saw blade diameter: 1,430 mm - Cutting width: 9.5 mm - Cutting speed: 10 to 20 m/min - Saw feed rate: 0–400 mm/min - Rapid return speed: 2,000 mm/min - Total power: 25 kW - Working height: 640 mm Cutting capacities: 90° cut - Angle steel: 250 mm - U profile: 400 mm - Double T-beam: 600 mm - Wide flange beam: 1,008x302 mm - Special flange beams: 1,000x450 mm Mitre cutting: IPBv beam - 75°: 1,008x302 mm - 60°: 910x302 mm - 45°: 716x304 mm - 40°: 716x304 mm - 35°: 478x307 mm IPBs beam - 75°: 1,008x402 mm - 45°: 524x357 mm IPE beam - 45°: 600x220 mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min–max): 80x65x10 mm – 250x250x28 mm - U profile (min–max): 80x45 mm – 400x110 mm - Double T-beam (min–max): 80x46 mm – 600x220 mm - Wide flange beam (min–max): 100x100 mm – 1,008x302 mm - Extra wide flange beam: 1,200x500 mm Drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8–40 mm Spindle speeds: 150–1,100 rpm Rapid feed/rapid return: 3,850 mm/min – 8,000 mm/min Drilling spindle feed: 0–500 mm/min Rapid spindle positioning: 15,000 mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45 kW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 LATERAL ARMS FOR BEAM LOADING IN PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS WITH OUTFEED + 6 LATERAL ARMS 4 LATERAL ARMS FOR SHORT LENGTHS THE MAJORITY OF ROLLERS ARE MOTORIZED Total installation length: approx. 60 linear meters including infeed and outfeed. *Installation drawings available upon request.