Brúska na plocho TOS Hostivar BPH 320A

TOS Hostivar BPH 320A

Stav: použitý, Výrobca: CINCINNATI Djdpfewrpykjx Alyskl

Stav: pripravené na použitie (použité), The machine is in very good condition and can be tested on site. Technical data – Grinding machine Working area (mm) – Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (rpm): 5000 Feed (mm/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, readout via CNC, template grinding 1:10, 1:20 or 1:50, suitable for rough grinding. Djdpfxswvgido Alyjkl If you have any further questions, please do not hesitate to contact me.

Stav: použitý, Rok výroby: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m D I S K U S Vertical double-sided surface grinding machine in C-frame design and with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 Serial no.: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x grinding width approx.: 60 x 120 mm Vertical adjustment of quills, each approx.: 150 mm Hydraulic infeed pulses for depth feed: 0.0025 – 0.05 mm Outer diameter of the transport disc approx.: 810 mm Rotary table feed, continuously variable: 14 – 145 mm/s Grinding wheel speed each approx.: (24 m/s) / 765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Total weight approx.: 7,000 kg Accessories / Special Equipment Dodpfjt Hw N Hsx Alyskl • Workpiece rotary device for round workpiece transport discs with corresponding slots for loading parts and with automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring the ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Continuous speed control of the rotary device according to grinding dimension and workpiece. • Manual grinding wheel infeed via corresponding buttons • Hydraulically swiveling dressing unit (RA) between the two grinding wheels for simultaneous dressing of both grinding wheels with corresponding compensation and automatic repositioning to the effective workpiece thickness after dressing = high time savings, can be manually triggered as well as via a timer. • Ampere meters for both grinding spindle drives * Central lubrication • Mechanical height control of the workpieces with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series. For example: washers, piston rings, hydraulic parts, clock parts, stamped parts, etc. Condition: good – will be ready for demonstration soon Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stav: použitý, Wheel diameter – max. 180 mm Wheel width: 45 mm Module – max. 4 Module – min. 0.5 Stroke length max.: 0 – 52 mm Spindle mount (internal): MK 4 Table diameter: 160 mm Dkjdpfetycg Sjx Alyel Table bore diameter: 75 mm Strokes per minute: 355 – 630 spm Feed range: 0.008 – 0.4 mm/stroke Space requirement: approx. 2.30 x 1.50 x 2.36 m Drive power: 6 kW Machine weight: approx. 2,500 kg With rack shaper attachment Change gear set Year of manufacture: approx. 1981

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Použitý brúsiaci stroj na ozubené kolesá Niles ZSTZ 630i. Stroj je plne funkčný, na požiadanie možno zaslať video. Dkodexzfugjpfx Alyel

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, sústružnícky priemer nad priečnym suportom: 690 mm, otvor vretena: 150 mm, sústružnícky priemer: 1 040 mm, priemer sústruženia nad horným suportom: 690 mm, výška stredu: 500 mm, šírka v strede: 2 000 mm, maximálna rýchlosť vretena: 5 000 ot./min, pojazdová vzdialenosť osi X: 160 mm, zdvih osi Z: 380 mm, prechod tyče: 55 mm, Výška hrotov: 500 mm Vzdialenosť medzi hrotmi: 2 000 mm Maximálny priemer na sústruženie: Na priečnom suportu: 690 mm Nad lôžkom: 1 040 mm V prirodzenom vybratí: 1 070 mm Šírka lôžka (kalené vodiace plochy): 670 mm Dĺžka vybratia: 480 mm Dĺžka vybratia pred platformou: 320 mm SUPORT Dĺžka vodiacich plôch na lôžku: 1 020 mm Posuv priečneho suportu: 640 mm Dsdpfx Ajyhhuwolyjkl Posuv pozdĺžneho suportu: 360 mm VRETENO Príruba vretena: ASA 15’’ Priemer otvoru vretena: 150 mm Rozmer predného ložiska NN: 200/310/82 mm Priemer zadného ložiska NNU: 190/260/69 mm Kužeľ vo vnútornej vložke redukcie: č. 6 Počet otáčok: 24 Rozsah otáčok: 4 – 800 ot./min. ZÁVITY Počet: 398 Metické: 0,5 – 224 mm Modulové: modul 0,25 – 11 Whitworth: záv./1’’ 56 – 1/8 Diametrálne: priemer 112 – 1/4 POSUVY Počet: 108 Pozdĺžne, priečne, suport: 0,05 – 22,4 mm/ot. RÝCHLOPOSUVY Pozdĺžny, priečny a suport: 2 500 mm/min Pozdĺžny spätný pohyb: 5 000 mm/min KONÍK Priemer pinoly: 130 mm Kužeľ pinoly: č. 6 Posuv pinoly: 420 mm LUNETY Priechod cez lunetu na lôžku: 140 – 500 mm Priechod cez lunetu na suportu: 40 – 350 mm MAXIMÁLNA NOSNOSŤ Nad voľným koncom: cca 1 500 kg Medzi hrotmi bez lunety: cca 5 000 kg Medzi hrotmi s lunetou: cca 6 000 kg Hmotnosť stroja: cca 7 800 kg

Stav: veľmi dobrý (použitý), Brúsna dĺžka bez magnetickej platne: 1500 mm Maximálna brúsna šírka: 750 mm Pozdĺžny posuv, os X: 1520 mm Priečny posuv, os Y: 650 mm Vertikálny posuv, os Z: 690 mm Priemer brúsneho kotúča: 406 x 100 mm Otáčky vretena: 1400 ot/min Dedpfx Aewlh Adslyskl Hmotnosť: 8600 kg Príslušenstvo: magnetická doska Braillon 1000 x 500 mm Elektronické riadenie: Elcon 3

Rok výroby: 1992, stav: použitý, Grinding height: 50 mm Dedpfx Ajt Hw Naslyjkl Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Spindle vertical adjustment (each): approx. 150 mm CNC-controlled grinding wheel infeed: 0.0001 mm Workpiece transport device feed rate, stepless: 40 - 235 mm/sec Grinding wheel speed (each, 30 m/s): 191-955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total power: approx. 85 kW/380 V/50 Hz Weight: approx. 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (upper and lower infeed, dressing unit, and workpiece rotation), direct input of all grinding parameters, plus • IONIC measuring control No. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers appropriate infeed of the grinding wheels, continuous measurement results on monitor for statistics, workpiece counting, etc. • Digital display of power consumption (amperes) for drive motors and grinding wheel speed • Portal design for greater stability and increased grinding accuracy • Rotary workpiece transport with stepless rotational speed adjustment as the 4th axis • Position monitoring unit to supervise the vertical position of the lower grinding wheel • 2 adjustable workpiece hold-downs at infeed and outfeed, each with height monitoring, simple stacker for raw parts, and outfeed of finished parts via conveyor belt • Semi-inclined, laterally mounted grinding wheel dressing device with pre-programmable dressing cycle, integrated as a CNC axis in the control, with safety shut-off • Large separate electrical cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, several table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large-scale production, such as stamped parts, piston rings, hydraulic components, etc. Condition: Good to very good – ready for demonstration soon Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. If you require a different grinding machine – especially from DISKUS – please contact us with your inquiry.

Stav: použitý, Rok výroby: 1974, Priemer kolesa – max. 400 mm Šírka kolesa: 75 mm Celkový inštalovaný výkon: 25 kW Hmotnosť stroja cca 7 t LORENZ Vysokovýkonný obrážač ozubených kolies Typ: LS 400 Rok výroby: 1975 Sériové číslo: 12592 Max. vonkajší priemer ozubeného kolesa: 400 mm (prípadne aj väčší) Max. priemer pre vnútorné ozubenie: cca 350 mm Max. šírka kolesa: 75 mm Modulový rozsah: 0,5 – 6 Dksdst Hww Dopfx Alysl Dĺžka zdvihu: 82 mm Nastaviteľnosť polohy zdvihu: 0 – 100 mm Vyloženie ťahacej vretena od tela stroja: 205 mm Vreteno s vnútorným upnutím: cca MK 5 Počet zdvihov (hrubovanie/finálna úprava): 118 – 1 000 /min. Rozmer stola: 400 mm Priemer otvoru stola: 125 mm Montážna výška medzi stolom a hlavičkou min./max.: 190/290 mm Fixné vyloženie ťahacej vretena: 250 mm Axiálny pohyb stola cca: 295 mm Počet zubov: cca 12 – 150 Rozsah posuvu – hĺbka zubu: 0,01 – 0,063 mm/zdvih Kruhový posuv pri náradí Ø 125: 0,125 – 3,150 mm/zdvih Pohon vretena/celkový pohon: cca 19 kW / 25 kW – 380 V – 50 Hz Hmotnosť: 7 000 kg Príslušenstvo / Špeciálne vybavenie: • Hydrodynamické lineárne vedenie so samostatným hydraulickým agregátom, • vstavaná medzidoska 100 mm na zvýšenie obrážacej hlavy, • hydraulické upínanie obrobkov značky RINGSPANN zabudované v stole pre ploché obrobky a vnútorné upínanie obrobkov, viaceré upínacie puky pre rôzne priemery obrobkov • plynulá regulácia počtu zdvihov pre hrubovanie a dokončovacie obrábanie (SIMOREG DC-Master) • automatická zmena počtu zdvihov a posuvu pre hrubovacie a finišovacie operácie v až 3 ťahoch, • automatické motorické fixovanie zdvihu v hornej polohe po dokončení obrábania, • samostatná rozvodná a ovládacia skriňa, • zabudované zariadenie na chladenie s dopravníkom triesok a magnetickým separátorom, • cca 20 výmenných kolies, Stav: uspokojivý až dobrý, čoskoro pripravený na predvedenie Dodanie: zo skladu - ako bolo obhliadnuté Platba: čisto netto - po obdržaní faktúry

Rok výroby: 1993, stav: dobrý (použitý), číslo stroja/vozidla: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mount diameter: 3 x Ø 80 mm Clearance between cylinders: max. 435 mm Cutting speed: hydraulically adjustable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically adjustable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Furthermore, it features an automatic workpiece feeding system for 2 workpieces. Clamping of shank and end piece holders is hydraulic. The machine has a coolant system with an integrated magnetic chip conveyor for use without a special foundation (pit). Remarks: Dedpfx Ajcc D Ddjlyekl This machine is designed for large series production. It is in very good condition, still in its original paint. The machine is powered and available for inspection at our warehouse.