Stroj na tvarovanie rúr, obrábanie koncov rúr

transfluid Maschinenbau GmbH UMR 642-CN

Pipe flaring machine, hydraulic flaring machine, hydraulic pipe flaring machine, 37° flaring machine, 90° flaring machine, ORFS flaring, JIC flaring, pipe end processing, flaring device, tube processing machine, rotary forming machine

Performance:
- For pipes from 6 - 42 mm Ø
- Max. wall thickness 4 mm (for 42 mm pipe Ø in ST)
- Cycle time (adjustable per form) 4 - 15 sec.
- RPM 200

Machine equipment / basic configuration:
- For forming pipe ends, e.g., at angles between 37° and 90° (tool-specific) in a single operation using the rotary forming process
- Depending on pipe Ø, 180° bends with a minimum inside dimension of 145 mm can be processed
- Clamping length depends on size, approx. 1.0 x D
- Forming length is limited by the tool geometry
- Operation and control via touch panel
- Activation via hand button
- Hydraulic feed for tool carrier, adjustable speed
- Electrically adjustable length stop to determine flare size
- Electrically adjustable forming stroke to set tool feed
- Electrically adjustable rolling duration
- Swing-away clamping jaw for easy insertion of ORFS rings
- Integrated drawer for tool storage
- Includes transparent safety covers for the working area
- Standard hydraulic and control components
- Stationary machine with base frame
- Colour: RAL 7047 grey, RAL 3020 red

Drives:
- Workpiece clamping: servo-hydraulic
- Tool carrier feed: servo-hydraulic
- Tool carrier rotation: electric

Machine data:
Nodpjwzbc Nofx Abxjdd
- Nominal pressure: 250 bar, Operating pressure: 200 bar
- Operating voltage: 400 Volt - 50 Hz - 3 Ph. - 4.5 kW
The average energy consumption of the machine is approx. 1.8 kWh/h. Since consumption depends strongly on factors such as pipe size and geometry, speeds, and power supply, it can only be considered an approximate value.

- Length: 1230 mm
- Width: 710 mm
- Height: 1240 mm
- Weight: approx. 800 kg

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.