Ohýbací lis + nakladací robot

TRUMPF TruBend Cell 5000

Stav: použitý, Rok výroby: 2018, model regulátora: , Description: Technical Data Year of manufacture: 2018 Press force approx.: 3200 kN Bending length approx.: 4420 mm Control unit: TASC 6000 Throat depth: 420 mm Clear distance between uprights approx.: 3680 mm Usable installation height approx.: 615 mm Machine weight approx.: 23,400 kg Equipment: - Solid machine frame - Press beam, stress-relieved annealed with high bending strength - Spherical mounting of the press beam (tilted arrangement) - Electro-hydraulic top drive with 4-cylinder technology - Optical setup and positioning aid - Generous die clearance - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation Cgedpfx Aoyy Hgqjlyot - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended Equipment: - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crowning - Work area lighting front and rear BendMaster (150): - Sturdy base frame and manipulator in aluminium cast design - Load capacity 150 kg, blank plus gripper - Low ground rail system in welded construction - Sheet sensor for contour detection - Rotary union for easy gripper change - Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers - Platform (300 mm) for the press brake Extended BendMaster Equipment: - Rail extension to 12 m - Sensors for 6-axis backgauge - Gripper change console - Vacuum gripper undefined - Modular vacuum gripper with separation (material for 3 grippers) - Gripper coupling - Clamping gripper - Sheet removal station with linear axis - Right side door for safety fence

Stav: použitý, Rok výroby: 2011, Pressing force approx.: 360 kN Bending length approx.: 1020 mm Clear distance between uprights approx.: 932 mm Usable installation height approx.: 295 mm Throat depth: 150 mm Working speed: 25 mm/s Approach speed: 220 mm/s Control: TASC 6000 Machine operating hours: 41,422 h Ram run time: 4,713 h Length: 1,805 mm Width: 1,330 mm Height: 2,380 mm Machine weight approx.: 2,600 kg Standard Equipment Machine - Sturdy machine frame - Optimized ram - High-dynamic electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Electrical cabinet climate control - Ergonomic machine design Cedpfxjyrf Dkj Alyegt Backgauge System - Rear stop system - Stop fingers Control - TRUMPF TASC 6000 integrated - Numerical shop floor programming - Windows XPe, Pentium M with 1.1 GHz clock speed - 1 GB RAM - 15-inch touch screen - Network capable - Teleservice Safety - Side-mounted, swiveling safety doors - Safety cover at rear - 2-button foot switch for standing and seated operation Ergonomics - Comfort support table (front) - Comfort footrest - LED front work area lighting - Swiveling control unit - 1x tray console and 2x document trays Productivity Package - BendGuard safety system (with block laser) - Graphical shop floor programming - Automatic tool clamping Additional Equipment Extended backgauge system - Rear stop system 6 axes Automation

Stav: pripravené na použitie (použité), Rok výroby: 2015, prevádzkové hodiny: 61 469 h, výrobca ovládačov: TRUMPF, model regulátora: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Capable of handling sheet metal parts up to 40 kg and equipped with a 6-axis backgauge system. Offers maximum repeat accuracy thanks to angle measuring technology (ACB) in automated operation. The machine features a robust all-steel frame, electrohydraulic top drive, and modern block hydraulics. It is operated via a TRUMPF TASC 6000 control unit with 15-inch touchscreen and network capability. This TRUMPF TruBend Cell 500 press brake is ideal for precise bending work. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Ram with spherical bearings and tilt adjustment • Electrohydraulic top drive with 4-cylinder technology • Generous throat depth • Flat front covers • Modern block hydraulics • Electronic pressure scale • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge • Backgauge system • 2-axis backgauge system (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool movement, 2 positions, pneumatic • Crowning • Manual crowning • CNC Control • TRUMPF TASC 6000 • Graphic workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable Cgsdpjx Imqlefx Alyst • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster Automation (standard equipment) • Robot / handling • Sturdy aluminum die-cast base and manipulator • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet sensor for contour detection • Rotary joint for quick gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge system. Ultimate repeat accuracy through angle measuring system (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Stav: dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, prevádzkové hodiny: 14 367 h, zdvih: 445 mm, hĺbka hrdla: 420 mm, pojazdová vzdialenosť osi X: 860 mm, model regulátora: TASC 6000, pracovná šírka: 4 420 mm, ohybná sila (max.): 320 t, vzdialenosť medzi stojanmi: 3 680 mm, inštalačná výška: 615 mm, typ ovládania: CNC riadenie, stupeň automatizácie: automatický, nastavenie zadného dorazu: riadené CNC, počet osí: 6, typ korunky: riadené CNC, typ ovládania: hydraulický, Výbava: Označovanie CE, bezpečnostná svetelná závora, dokumentácia / manuál, nožný diaľkový ovládač, systém merania uhla, TruBend Cell 5000 – Robotická ohýbací buňka 320 t Kompletní servisní historie - Zadní dorazový systém, 6 os s klimatizací rozvaděče - Senzorika pro 6osý zadní doraz - Hydraulické upínání horního nástroje - CNC bombírování - Příprava pro ACV - MobileControl - Osvětlení pracovního prostoru vzadu - Osvětlení pracovního prostoru vpředu - Komfortní ovládání: displej, myš, klávesnice - BendGuard - BendMaster 150 - Prodlužení dráhy 16 000 mm - Stanice pro přehmat - NC - Detekce dvojitého plechu Csdpfjylankox Alyegt - Pravé boční dveře pro ochranný plot - Vakuový uchopovač - 3x pneumatická spojka úchopovače - Robustní rám stroje z celooce­lové konstrukce - Lisovací nosník, nízkonapěťově žíhaný - Pohon 4-válcový z horní strany - Bloková hydraulika s tichým dvojitým čerpadlem - Zadní doraz s CNC řízenou osou X a R - Hydraulické upínání horního nástroje - Hydraulické upínání spodního nástroje - Chlazení rozvaděče pomocí vzduch-vzduch výměníku těpla - Síťové propojení řídicího systému stroje Řídicí systém - TRUMPF TASC 6000 Bezpečnost - Standardní bezpečnostní zařízení

Stav: použitý, Rok výroby: 2007, číslo stroja/vozidla: 001669, Lg 33121 Single-Sided Decoiler Cedpfx Ajhigmbslyogt ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + reel traversing unit Included with: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls multiple-supported to prevent deflection All rolls driven by distribution gearbox and universal shafts. Used, as-is ex stock, immediately available. Overhaul optionally available upon request. Delivery time by arrangement. Further data available shortly or on request.

Stav: veľmi dobrý (použitý), Rok výroby: 2017, prevádzkové hodiny: 3 200 h, lisovacia sila: 130 t, Space requirement: 11,500mm x 10,000mm + Increased installation height/lift +230mm + 4-axis backgauge system + Rear workspace lighting + Front workspace lighting - Documentation TruBend Automation BendMaster (60) Standard equipment: BendMaster - Robust base frame and manipulator in cast aluminum design - Load capacity 60 kg, sheet plus gripper - Low-profile floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for easy gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double-sheet detection - NC repositioning station - Vacuum generation for suction grippers Control - TRUMPF PC control with operating terminal - Remote service via Internet - User-friendly interface with screen, mouse, keyboard Cgodsxayl Dspfx Alyot Safety - Protective fence with access door Additional equipment + Track extension to 10m + Gripper change console + Modular vacuum gripper without separation (material for 3 grippers) + Modular vacuum gripper with separation (material for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right side door for protective fence (or left in combination with ToolMaster) Machine - Sturdy machine frame in all-steel construction - Press beam - Spherical mounting of press beam with tilt - Electrohydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid with control valves - Generous bending clearance - Flat front covers - Block-type hydraulic system - Electronic pressure gauge - Measurement system with glass scale and spring-back compensation - Hydraulic oil inside machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X and R axis Tool clamping - Upper tool clamping hydraulic - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical shop floor programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Remote service via Internet Operation - Operator console with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety features - CE marking

Stav: dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 2006, laserový výkon: 4 000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL SPECIFICATIONS: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of Manufacture: 2006 Working Area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser Power: 4,000 watts Max. Sheet Thickness (Mild Steel): 20 mm Max. Sheet Thickness (Stainless Steel): 15 mm Max. Sheet Thickness (Aluminium): 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser module Laser module: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer Cjdpfx Alouthz Tjyjgt - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure control - APC capacitive height and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor system - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance log, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT color display - Electrical equipment: voltage 400 V / 50 Hz - Paint: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, Rok výroby: 2022, prevádzkové hodiny: 60 h, +++ Predvádzací stroj s cca 60 prevádzkovými hodinami +++ +++ Spúšťacia matrica +++ Základný stroj: TruPunch 3000 veľký formát (S20) Stroj  Boxový rám  Hybridný osový systém  Lineárny zásobník s 24 stanicami pre svorky a nástroje  Hydraulické svorky (3x)  Pohony s bezúdržbovými trojfázovými motormi  Prepolohovanie s programovateľnou prítlačnou nohou  Nožný spínač na zatváranie svoriek  Šachta na časti, vpravo  Klapka na odoberanie častí, vľavo  Senzor pre klapku na odoberanie častí  Možnosť dodatočnej montáže SortMaster Compact Bubnová hlava  Delta Drive  Otočný adaptér pre jedno stanovište  Programovateľná poloha prítlačnej nohy  Kompenzácia dĺžky nástroja  Mazanie razníka sprejom  Vákuový systém na odvádzanie výrezov  Tvarovacia funkcia  Počítadlo pracovných zdvihov razníka Ovládanie  TRUMPF ovládanie na báze Rexroth IndraMotion MTX  Dotykový panel s 19" farebnou obrazovkou TFT  Touchpoint  Auto-vypnutie  Rozhranie pre vzdialenú podporu  Správca programov  Plán výroby Prenos dát  Central Link  Online Update Manager Bezpečnosť  CE označenie a Smernica o strojových zariadeniach EC  Dvojlúčová bezpečnostná svetelná závora Rozšírená štandardná výbava  Prvá indexová čapka (vnútorná pravá)  Guľôčkové stoly  Šachta na časti pre kontajner hotových výrobkov  Kontajner na triesky vzadu pri vyberaní Rozšírené strojové a razniace príslušenstvo: MultiTool funkcia MultiShear funkcia MultiBend funkcia Závitovacia funkcia s počítadlom závitov  Kontrola zlomenia tvárniaceho závitníka  Monitorovanie hladiny mazadla  Neobmedzená časová licencia Funkcia značenia / rýchleho vystuženia / dokúpenie Funkcia gravírovania Funkcia odihlovania a valcovania Adaptívna kalibrácia zdvihu Csdjxmfc Ujpfx Alyjgt StripLine Mazanie matrice sprejom s kontrolou hladiny Spúšťacia matrica Integrovaná vyrovnávacia funkcia Smart punch monitoring Prídavná svorka Výškovo nastaviteľná svorka Tlmenie vibrácií Kontajner na triesky na predné vybratie Kefové stoly s pomocou pri nakladaní a vykladaní Detekcia deformovaného plechu Technické údaje TruPunch 3000 veľký formát (S20) Rozmery, hmotnosti Šírka 7644 mm Hĺbka 7666 mm Výška 2200 mm Hmotnosť so všetkými jednotkami 13800 kg Ovládanie, hardvér, elektrika Typ pevného disku SSD Počet a veľkosť disku 2 GB x 120 GB Pamäť HDD pre zákaznícke programy 10 GB Obrazovka dotyková obrazovka Veľkosť obrazovky 21,5" Rozhranie USB Sieťové pripojenie RJ45 Typ riadenia Bosch CML75 Operačný systém Windows 10 IoT Osové údaje Pohon osi X/Y/C NC-riadené, bezúdržbové trojfázové servomotory Pohon razniacej hlavy Elektrický pohon Max. rýchlosti osí - X os 90 m/min Max. rýchlosti osí - Y os 60 m/min Max. rýchlosť - súčasne 108 m/min Max. rýchlosť osi C (raznenie) 350 ot./min Max. rýchlosť osi C (závitovanie) 350 ot./min Max. rýchlosť razniaceho zdvihu (E = 1 mm) 690 1/min Max. rýchlosť značenia 1000 1/min Presnosť - Odchýlka polohovania Pa +/- 0,1 mm Presnosť - Polohový rozsah Ps +/- 0,03 mm Presnosť - Najmenší programovateľný prírastok 0,001 mm Pracovný rozsah a rozmery obrobku Max. hrúbka plechu 6,4 mm Max. hmotnosť obrobku 230 kg Pracovný rozsah - os X 3000 mm Pracovný rozsah - os Y 1550 mm Údaje k razeniu Max. razná sila 180 kN Max. prítlačná sila prítlačnej nohy 20 kN Max. veľkosť nástroja, razenie (vonkajší kruh) 76,2 mm Max. veľkosť nástroja, tvarovanie (vonkajší kruh) 101,6 mm

Stav: nový, výkon: 25 kW (33,99 k), pojazdová vzdialenosť osi X: 1 430 mm, zdvih osi Y: 670 mm, zdvih osi Z: 640 mm, hmotnosť obrobku (max.): 1 200 kg, počet pozícií v zásobníku nástrojov: 30, výrobca ovládačov: HEIDENHAIN, celková výška: 2 900 mm, celková dĺžka: 4 855 mm, celková šírka: 2 945 mm, celková hmotnosť: 11 000 kg, Výbava: Označovanie CE, dokumentácia / manuál, LAGUN L 1400 Machining Center – Available at Short Notice The LAGUN L 1400 machining center stands for high precision, robust design, and cost-effective production. Ideal for both single-part and series manufacturing in mechanical engineering, mold making, and contract manufacturing. Cjdpshy Atfefx Alyegt Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / leasing options available ✔ Compact design with high rigidity ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with their reliability, ease of maintenance, and low operating costs. Technical features: Control system: HEIDENHAIN TNC 7 CNC control + 16" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Fully enclosed guard with side-opening vision panels Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare a customized offer

Stav: použitý, Rok výroby: 2008, Bombírovanie riadené CNC Cgedpfx Ajyvr Ewslyst Dĺžka ohybu 4250 mm 5-osý zadný doraz Osvetlenie pracovného priestoru Parkovacia pozícia 900 mm Hydraulické upínanie spodného nástroja Hydraulické upínanie horného nástroja Posuv spodného nástroja CNC Montážna výška 615 Príprava na ACB