Upínacia doska

unbekannt 1990 x 1570 mm

Stav: dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, Hmotnosť 4950 kg, celková hmotnosť 12000 kg Bsdpfx Agewpmcke Ajld 5,5 kW

Stav: použitý, Clamping plate - Table of a surface planer - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 Distance between T-slots: 263 mm Blodpfx Aebn Amfjg Aed Total length: 6230 mm Overall plate height: 350 mm Weight: 11 t

Stav: generálne opravený (použitý), Rok výroby: 2026, Funkcionalita: plne funkčný, otvor vretena: 120 mm, sústružnícky priemer: 1 550 mm, sústružnícky priemer nad lôžkom suportu: 1 550 mm, priemer sústruženia nad horným suportom: 1 220 mm, dĺžka sústruženia: 6 000 mm, celková dĺžka: 8 500 mm, celková šírka: 1 600 mm, celková výška: 1 600 mm, hmotnosť obrobku (max.): 15 000 kg, držiak vretena: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications consistent with the technical and operational documentation of a new machine, complies with the technical acceptance criteria of WOT and Polish standards, and also fulfills EU requirements. The machine is supplied with a full 12-month warranty covering spare parts and electrical components. Availability: General overhaul on order, lead time 3.5 months from order confirmation. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Full-length rear protection guard - Inverter incl. soft-start function and potentiometer for stepless speed control Bledpfx Aev Ab Dqjg Aed

Stav: veľmi dobrý (použitý), Motor-driven NC rotary table Stepless rotary table (indexing increments: 0.001°) Attached pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Bodpfx Aofk R Tdsg Aold Total height: 660 mm Centering bore: 100 H6 mm T-slots: 7 pcs Slot size: 22 H7 mm Slot spacing: 160 mm Position feedback via rotary encoder: ROD 250. Condition: Very good (used) Optionally available with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine maintenance - Machine overhauls - CNC control modernization

Stav: dielensky repasované (použité), Rok výroby: 2007, prevádzkové hodiny: 22 605 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 600 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 1 400 kg, vstupný prúd: 238 A, celková hmotnosť: 36 000 kg, kapacita olejovej nádrže: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data - Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed chute dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connection rating: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk densities: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank volume: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions, baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight (baler only): approx. 36 t Notes: The baler has been partially overhauled, serviced in our workshop, tested upon completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works were carried out: - Derusting and partial repainting of the baler - Hydraulic oil tank drained, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press lid cylinders, and press channel cylinder disassembled, inspected, honed, all seal kits renewed, and final pressure test performed - Pre-press lid with bearings and bearing housings dismantled. 1st and 3rd arc segments removed and newly welded - Both bearings of the pre-press lid shaft replaced - Upper material deflector on pre-press lid frame replaced - Press ram dismantled, checked, and both front rollers renewed - Material deflector and wear profiles on sides and bottom of press ram removed and newly welded - Horizontal and vertical needle and tying units dismantled, checked, plastic slide plates, driller shaft bearings, and wire guide pulleys in the needle heads replaced - Both brass slide rails on left and right cover of the press ram replaced Bledpfovf E Avex Ag Aod - Both wire deflection units with bale retention clamps completely renewed - Wire inserting unit including hydraulic cylinder below needle guides completely renewed - Wire inlet grooves on floor and side walls of press channel welded and smoothed - General maintenance and service work carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored No liability is assumed for the technical data or possible mistakes.

Rok výroby: 1999, Stav: použitý, NOSNOSŤ 2000 kg Bedpowa I A Tjfx Ag Asld VÝŠKA 4,7 m a 5 m DĹŽKA RAMENA 3,2 m 2 KUSY

Stav: takmer ako nový (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, dĺžka záruky: 3 mesiace, PONUKA FARO QUANTUM 2.5E + SCAN HD Quantum E 2,5 m 7 osí, sériové prevedenie Číslo: W25-E5-17 Model: 2100 Volumetrická presnosť: 50 m Quantum M 2,5 m, 7 osí – obsahuje rameno s Bluetooth a bezdrôtovou technológiou, kalibračnú sadu, základňu, platňu, dotykovú sondu 3 mm, káble 6 mm, robustný transportný kufor, nabíjateľnú batériu. Bedpovvt N Eofx Ag Asld PolyWorks Inspector Štandardný balík – univerzálna softvérová platforma pre 3D metrologiu a rozmerovú kontrolu, uzamknutá licencia na jeden počítač. Verzia 2023 (bez údržby). Kalibrácia podľa ENAC, na základe normy ISO 10360-12:2016 Voliteľné príslušenstvo: Statív + 8. os + PolyWorks 2023

Stav: takmer ako nový (použitý), číslo stroja/vozidla: DCMS, Rok výroby: 2007, Demag manulift reťazový kladkostroj nosnosť: 125 kg výška zdvihu: 2,8 m prevod: 1/1 rýchlosť zdvihu: plynulá 0,15 - 30 m/min vyhotovenie: vybavený závesným okom Blsdpfx Ajg Stp Hjg Aed použitý vo veľmi dobrom stave (kompletne prekontrolovaný) (nová cena € 3353,-) K dispozícii viac DCMS kladkostrojov

Rok výroby: 2006, Stav: veľmi dobrý (použitý), číslo stroja/vozidla: W144, Technical data: 1 Demag KBK column-mounted slewing crane NL 50 KG Rated load at full outreach: 50 KG Height: approx. 3.8 m; Underside of jib: approx. 3.3 m Outreach: approx. 5 m; Hook height: approx. 2.95 m Total weight: approx. 300 KG With 125 kg steel ST chain hoist with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range: 270° Bledpfjp Artdsx Ag Aod Crane is dismantled and packed on a pallet Test certificate available Very good condition, see pictures Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Shipping by freight forwarder or collection by appointment

Rok výroby: 1992, Stav: takmer ako nový (použitý), číslo stroja/vozidla: Div1, Technical Data: 1x Demag KBK 1 pillar jib crane, SWL 125kg with chain hoist Load capacity at full outreach: 125kg / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450kg Supplied with steel or Demag chain hoist 125kg, depending on stock Incl. bolts, cable trolley, trolley, end cap, etc. Various cranes in stock Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Bsdpong H T Ujfx Ag Aeld Further cranes available, lifting capacity 80–5000kg, please enquire See pictures Dispatch via forwarding agent or collection only by prior arrangement