Klimatická testovacia komora Vötsch Fitotron HGC1014

Vötsch Klimaprüfschrank 5°C bis +45° Fitotron HGC 1014 V Schrank 3 mit Bel.

Stav: veľmi dobrý (použitý), Weiss Model: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control Cabinet Dimensions Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal Dimensions Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor Load: 30000 N/m² (surface load) Test Volume: approx. 27,000 litres Specimen Mass: 1000 kg Cooling / Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Consistency: ± 0.3 to 1.0 K (over time) Temperature Consistency: ± 0.1 to 0.5 K (over time) Climatic Operation: 10 to 90°C Humidity: 10...98% r.h. Temperature Consistency: ± 0.1 to 0.5 K (over time) Dew Point Range: +4°C to +84°C Power Supply: 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Hodpfxovx Nfbo Affonk Refrigerants: R23 and R404A Fitted with additional floor plates to increase load capacity Important information for your safety as a buyer! The following actions are carried out in advance for our chambers offered: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors reserved!) We are happy to answer further questions by phone.

Rok výroby: 2020, stav: veľmi dobrý (použitý), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climatic Test Chamber ClimeEvent, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load: Designed for a maximum load of 250 kg Temperature Testing Specifications: Temperature range: -55 to +180°C Hnjdpfx Afjw R Rt Isfek Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Climatic Testing Specifications: Temperature range: +10 to +95°C Humidity range: 10 to 98 % r.h. Climate Performance Data (extract): Humidity range: 10 to 98 % relative humidity (r.h.) Temporal humidity deviation: At chamber center at steady-state, depending on climatic value: ±1 to ±3 % r.h. Temporal temperature deviation: At chamber center at steady-state, depending on temperature: ±0.1 to ±0.3 K Spatial temperature uniformity: Relative to the set value (in >20% r.h. range): ±0.5 to ±1 K Operating Data: LED strip 24 V, 6.8 W / 2 × Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode function. Weight: approx. 2050 kg For your peace of mind as a buyer, the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted.) For additional questions, we are happy to assist you by phone.

Stav: použitý, Rok výroby: 1961, Funkcionalita: plne funkčný, číslo stroja/vozidla: D08L/7656, Ponukové číslo: D08L/7656 Druh stroja: Stroj na rovnanie a strihanie drôtu Info: Dvojdrôtový stroj Značka: BÜNDGENS Typ: UD2 Rok výroby: 1961 Rozsah priemerov: 0,8-2 mm Dĺžky strihu: 1000 mm Rýchlosť – metrov/min: 80 Umiestnenie: U nás na sklade Hnjdpfx Afewi S H Ijfsk

Rok výroby: 2022, stav: veľmi dobrý (použitý), Dycometal Model: CCK -40/1500T Water-cooled climate chamber Volume: 1,500 liters Internal dimensions: Height 1,000 mm x Width 1,000 mm x Depth 1,500 mm External dimensions: Height 2,200 mm x Width 1,293 mm x Depth 3,400 mm Thermal test range: Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to 1.5°C Climate test temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Hsdpou N Uugefx Affenk Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1,120 kg Condition: used Scope of delivery: (See photo) (Subject to prior sale and technical changes; specifications may vary!) For further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), TIRA Type: TCZ 4022 S -2K Description: Climate simulation chamber, air-cooled System Design: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40 to +140°C - Temperature stability, in supply air (over time): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C - Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C Performance Range for Climate Testing: - Temperature range: +10 to +90°C - Humidity operating range: 10 to approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5 to +89°C (without thermal test chamber load) - Humidity stability (in supply air, over time): ≤ ±2.5% RH (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15 to +80°C - Humidity: 15 to approx. 80% RH (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10 to +74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: - Air guidance: Supply air via perforated sheet at rear wall, ceiling area Exhaust air via perforated sheet at rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; Heating with electric resistance heater - Dehumidification: Direct dehumidification by evaporating refrigerant in a heat exchanger - Internal lining: Stainless steel Hedovx S Hhjpfx Affenk - External cladding: galvanized, powder-coated steel sheet - Floor construction: Stainless steel, floor load capacity 15,000 N/m² Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, external painted, with viewing window (W x H) 1000 x 1000 mm - Test chamber illumination: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration Unit (1 piece): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 piece): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL7032, pebble grey - Control cabinet: RAL7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Nominal voltage: 400 V +6% / -10%, 3/PE/N, 50 Hz - Nominal power: 95 kW - Nominal current: 150 A

Stav: veľmi dobrý (použitý), Typ: PHP - J3 von Espec Technische Daten: - Luftgekühlt - Temperatur- und Feuchtebereich: Raumtemperatur +10°C bis +100°C / 40 bis 98% relative Luftfeuchtigkeit - Temperaturschwankung: ±0,3 K - Feuchtigkeitsschwankung: ±2,5% - Rauminhalt: 398 Liter Abmessungen: - Innenmaß: Breite 600 mm x Höhe 830 mm x Tiefe 800 mm - Außenmaß: Breite 1.010 mm x Höhe 1.690 mm x Tiefe 1.273 mm - Netzanschluss: 400 VAC, 3-phasig, 50 Hz - Maximalstrom: 8,3 A (400 VAC) - Gewicht: 335 kg Lieferumfang: Espec Klimaprüfschrank Zu Ihrer Sicherheit als Käufer beachten Sie bitte folgende Informationen: Es werden folgende Maßnahmen an unseren angebotenen Prüfschränken vor Versand durchgeführt: 1. Funktionsprüfung sowie Austausch erforderlicher Komponenten 2. Bei Bedarf Neubefüllung mit gesetzeskonformem Kältemittel 3. Dichtigkeitsprüfung inkl. Zertifikat 4. Nach bestandener Prüfung erfolgt ein dokumentierter Probelauf Zustand: gebraucht / used Lieferumfang: siehe Abbildung (Änderungen und Irrtümer in den technischen Daten vorbehalten!) Hnsdpetzbz Asfx Affjk Für weitere Fragen stehen wir Ihnen gerne telefonisch zur Verfügung.

Stav: použitý, Funkcionalita: plne funkčný, Použitý ťahový skúšobný stroj Zwick Z2,5 Zwicki s novou riadiacou elektronikou a softvérom PM-Soft-Smart pre Windows na ťahové, tlakové a ohybové skúšky do 2,5 kN. Stroj bol prestavaný na nový riadiaci systém s ovládačom MFC a je možné ho ovládať výhradne z počítača. Pripojenie k štandardnému PC alebo notebooku je realizované pomocou USB kábla. Softvér PM-Soft-Smart pre Windows je vysoko flexibilný riadiaci a vyhodnocovací softvér, ktorý umožňuje používateľovi vytvárať neobmedzený počet skúšobných programov. Dodávka navyše zahŕňa skúšobnú špecifikáciu vytvorenú na základe požiadaviek zákazníka. Vhodné upínacie zariadenia pre takmer všetky skúšobné úlohy sú dostupné ako príslušenstvo. Technické údaje: Jednostĺpový skúšobný stroj vrátane 2,5kN snímača sily Zdvih priečneho nosníka: 800 mm Hĺbka pracovného priestoru: 100 mm Rozlíšenie posunutia: 0,0001 mm Hnjdeykpamjpfx Affjk Skúšobná rýchlosť: 0,2-1000 mm/min Napájanie: 230 V AC Rozmery (H x Š x V): 414 x 320 x 1260 mm Hmotnosť: cca 40 kg

Stav: veľmi dobrý (použitý), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber For your peace of mind as a buyer, please note the following information! The following procedures are performed on our listed chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Hnodpfxstzbzco Affjk (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stav: použitý, Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: D08L/8302, Ponukové číslo: D08L/8302 Typ stroja: Stroj na rovnanie a strihanie drôtu Výrobca: BÜNDGENS Typ: UDW0 Rok výroby: 2001 Priemerový rozsah: 0,2-1,3 mm Dĺžka strihu: 5-300 mm Hodpowi Tfrofx Affonk Rýchlosť – metre/min.: 15 Umiestnenie: U nás na sklade

Stav: dobrý (použitý), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% RH Humidity tolerance: +/- 5.0% RH Hnedpouvi Nfefx Affsk Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control unit: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, please contact us by phone.