Klimatická skúšobná komora s vlhkosťou

Vötsch VC³ 0100 0°C bis + 90°C

Stav: veľmi dobrý (použitý), Here we offer a Weiss climate test chamber. Model: SB2/500/80 water-cooled Temperature operation (cooling/heating): -75°C to +180°C Climatic operation: +10°C to +95°C Humidity range: 10% to 98% RH Temperature stability (temporal): ±0.2 K Humidity stability: ±1% RH Rate of temperature change: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min Bwjdpsm Tvzcefx Adrjh External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feedthroughs: Left side: Ø 100 mm Right side: Ø 50 mm Supply voltage: 400 V / 3Ph+N+PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 Important safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Rok výroby: 2020, Stav: pripravené na použitie (použité), Operating temperature: 10-300°C, setpoint temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN Class A, 4-wire measurement, control system: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration at 3 temperature values, parameter selection (temperature, circulating air fan, exhaust air, program runtime, time zones), electronically adjustable air turbine, adjustable in 10% increments, fresh air via adjustable exhaust air flap with preheating, exhaust air connection with throttle valve, electronically adjustable, logging: data storage in case of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optionally via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. shelves: 3, max. load: 60kg, max. load per shelf: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has barely been used. An inspection on site is possible. Bjdpfew Tl Ilox Adrewh

Stav: veľmi dobrý (použitý), Zwick / Roell Zwick / Roell Typ HIT5.5P – Pendulum Impact Testing Machine For sale is a high-quality, used pendulum impact tester of type HIT5.5P from the manufacturer Zwick / Roell. This device is ideally suited for instrumented impact testing according to the Charpy and Izod methods on plastics, metals, or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction compensation = empty swing Impact velocity = 2.9 m/s Pendulum mass = 1.19 kg Bwodpfswqfnujx Adroh Release angle = 107.46° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Testing methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Power supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P including 5.5 J pendulum Control unit with operator panel Power and connection cables Shipping via freight forwarder (pallet shipping) – costs on request Collection by arrangement in Borken possible. Condition: used (Specifications and details subject to change and error!) Please feel free to contact us by phone for further questions.

Stav: veľmi dobrý (použitý), Weiss teplotná komora Ponúkame Vám teplotnú komoru Weiss. Weiss teplotná komora, chladená vzduchom, s chladiacim kondenzátorom Weiss. Objem skúšobného priestoru cca 990 litrov Technické údaje pre teplotné skúšky: Teplotný rozsah: -70 °C až +180 °C Časová odchýlka teploty v strede použiteľného priestoru: ±0,1 až ±0,5 K Priestorová odchýlka teploty: ±0,5 až ±2,0 K Teplotný gradient (podľa IEC 60068-3-5): 1 až 4 K Rýchlosť zmeny teploty (podľa IEC 60068-3-5): Ohrievanie 5 K/min Chladenie 5 K/min Tepelná kompenzácia max. 2750 W Priebežka súčasťou základnej výbavy: R1: NW 125 mm L1: NW 50 mm Rozmery: Vnútorné rozmery skúšobného priestoru: šírka 1100 mm x hĺbka 950 mm x výška 950 mm Rozmery skrine: šírka 1390 mm x hĺbka 1525 mm x výška 1995 mm Maximálne zaťaženie (rovnomerne rozložené) podlahy skúšobného priestoru: 150 kg Bedpfep Dun Ajx Adrswh na jeden rošt: 50 kg Celkové zaťaženie nosných roštov: 100 kg Prevádzkové údaje: Osvetlenie skúšobného priestoru: halogénová žiarovka 24V, 50W Menovité napätie: 3/N / PE AC 400 V ±10% 50 Hz Menovitý výkon: 27,0 kW Menovitý prúd: 42,02 A Výdaj tepla pre vodou chladené skúšobné skrine (maximálny odvod do okolia): 1,3 kW Hluk: Hladina akustického tlaku cca 64 dB(A) Chladivo: (prestavba na R-452a) Hmotnosť: cca 960 kg Typ: WT11-1000/70/5 Pre Vašu bezpečnosť ako kupujúceho Vám poskytujeme nasledujúce informácie! Pri našich ponúkaných komorách vykonávame vopred tieto úkony: 1. Kontrola funkčnosti a výmena potrebných komponentov 2. Nové naplnenie so zákonne schváleným chladivom 3. Test tesnosti s certifikátom 4. Po úspešnej kontrole sú komory testované v skúšobnej prevádzke, monitorovanej kalibrovanými prístrojmi. Stav: použitá Dodávka: (pozri foto) (Zmeny a chyby v technických údajoch a špecifikáciách vyhradené!) V prípade ďalších otázok nás neváhajte kontaktovať telefonicky.

Stav: veľmi dobrý (použitý), Weiss Model: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touch Panel" All control and operating commands can be triggered via the "Touch Panel" simply by touching the function icons. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Specifications for Temperature Tests: Temperature Range: -40 to +180 °C Temporal Temperature Deviation at chamber center: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. Heat Compensation: 4500 W Operating Data: Test Chamber Lighting: 2x 24V, 50W Halogen Bulbs Rated Voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated Current: 22.0 A, Rated Power: 11.5 kW Main Circuit Protection (customer side): 32 A slow-blow fuse Sound Pressure Level: Measured at 1m distance from the front, 1m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg Bwodpfx Asthhw Asdrjh Important Safety Information for Buyers: The following points are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information without guarantee!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Klimatic Test Chamber We are offering a Vötsch climate test chamber for sale. Model: VC³ 4100 Air-cooled With a temperature change rate of 3 K/min Test Chamber Internal Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Unit Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Cable Ports: Ø 125 mm, Ø 50 mm Specifications for Temperature Tests: - Temperature range: -42°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature uniformity: ±0.5 to ±1.5 K Temperature Change Rate: - Heating: 4.0 K/min - Cooling: 3.0 K/min Bedpfeqnutmsx Adrewh - Max. heat compensation at +20°C: 4500 W Specifications for Climatic Tests: - Temperature range: +10°C to +95°C - Dew point range: -3°C to +94°C - Humidity range: 10 to 98% rH - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.5 to ±1.0 K - Temporal humidity deviation: ±1 to ±3% rH - Max. heat compensation: 500 W Mains Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 11.5 kW Rated Current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, the following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (see photo) (Specifications and data are subject to change and error!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018, water-cooled Bwsdpfx Aowgayksdroh Control Unit: “Touchpanel” All control and operating commands can be issued by simply touching the function symbols on the control unit “Touchpanel”. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left sides, allowing measurement leads and test devices to be routed into the test space. Standard configuration feed-throughs: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Technical data for temperature testing: Temperature range: -70°C to +180°C time stability: ±0.1 to ±0.5 K spatial stability: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Technical data for climate testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH temperature deviation (temporal, center of usable space): ±0.1 to ±0.3 K temperature deviation (spatial): ±0.5 to ±1.0 K temperature gradient: 1 to 2 K humidity deviation (temporal, center of usable space): ±1 to ±3 % RH Electrical connection: Rated voltage: 3/N/PE AC 400V ±10%, 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, on-site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net Buyer Information – For Your Safety! The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), GALDABINI Type: Quasar 50 / Rated Capacity: 50 kN with PC, monitor, and test software GraphWork 5 Universal Testing Machine The universal testing machine type "QUASAR" is designed as a single-space testing system and basically consists of the following assemblies: Machine frame, with design and structure of the machine load frame engineered for the specified maximum loads wherever required: Electromechanical loading system with toothed belt drive, timing pulleys, powered by DC or brushless servo motor and recirculating ball screws. Load measurement system with force transducer suitable for tension and compression tests. Electronic control unit that manages all functions: Regulation and control, monitoring and acquisition of output signals from the force, strain, and crosshead displacement amplifiers. The system is based on a 32-bit processor clocked at 25 MHz; analog signal acquisition is carried out by an A/D converter with 20-bit resolution. The electronic controller is usually placed in the machine base. This also applies to most electrical components for drive and power supply. User interface with PC, connected to the electronic control and monitoring board via a serial RS232 interface with high data transfer rate of 38,400 baud. Rigid two-column construction with a maximum capacity of 50 kN Suitable for metals, plastics, composites, and other materials Modern design and advanced functionalities Flexible, modular setup for easy future upgrades Key technical advantages include extremely high resolution for force and displacement values, and a minimum test speed of 0.0005 mm/min for top performance and the most precise results. Technical specifications: Rated capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min Bwjdpfx Ajv Tywqjdrjh Idle speed: 500 mm/min Distance between grips: 1000 mm Total traverse: 1000 mm Crosshead travel resolution: 0.1 µm Repeatability of positioning: 2 µm Distance between wedge grips: 480 mm Clearance between columns: 410 mm Force units: Newton - daN - kgf - lbs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting for use: 300 lux Condition: used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C time-based ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min. Cooling: 7.5 K/min. Specifications for Climate Testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (time): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (time): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 21 A Protection: 32 A slow-blow, provided by customer Refrigerants: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required Bwjdpov N Hc Eofx Adroh 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data, specifications, and information are subject to change and correction!) For further questions, please contact us by phone.

Stav: dobrý (použitý), Heraeus Vötsch type: VTS 7034-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW | Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69 dB(A) Lateral port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R23 Weight approx. 570 kg Bedpoun Izcefx Adrowh For your security as a buyer, the following information: The following procedures are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally approved refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications!) If you have further questions, we are happy to answer them by phone.