Stellitiermaschine

Vollmer GWM 10 U

Stav: veľmi dobrý (použitý), WEINIG Hydromat H23 Line, S/N 87321, Year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer/moulder with reinforced KASCHWIG 3-sided soundproof enclosure • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronically controlled feed, frequency-regulated, 8 – 80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th spindle universal 11.0 kW (4-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm Rodjwvqklopfx An Iow • All spindle motors equipped with NEW motor soft start/brake combinations • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 powered rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with outboard bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 pneumatically pressed • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without cutterheads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components were used: NEW horizontal/vertical spindle NEW outboard bearings All spindles with HL bearing system All motors newly mounted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS in the machine Condition: See attached photos. Technically in top (A1) condition. Infeed mechanization not refurbished – all parts complete and operational Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Errors and prior sale excepted.

Rok výroby: 1987, stav: použitý, Kehren Rundtisch Typ RS 7C, použitý Výrobca: Kehren, Honneff Č. objednávky: 4179 Rok výroby: 1987 Ovládanie: Siemens 3G PLC: Siemens S5 Brúsiaci motor: BBC QUB 200 Priemer otočného stola: 750 mm Priemer brúsnej hlavy: 460 mm Ovládací panel s obrazovkou Rjdpehgmwgjfx An Isw Chladiace zariadenie Preplachovacie čerpadlo Čerpadlo chladiva Automatický pásový papierový filter Rozvádzač

Stav: veľmi dobrý (použitý), Rok výroby: 2016, prevádzkové hodiny: 200 h, Funkcionalita: plne funkčný, celková výška: 1 760 mm, celková dĺžka: 1 100 mm, celková šírka: 850 mm, hmotnosť obrobku (max.): 12 kg, maximálna rýchlosť vretena: 10 000 ot./min, otáčky vretena (min.): 500 ot./min, dĺžka posuvu os X: 100 mm, dĺžka posuvu osi Y: 190 mm, dĺžka posuvu osi Z: 325 mm, typ vstupného prúdu: trojfázový, priemer brúsneho kotúča: 125 mm, celková hmotnosť: 520 kg, dĺžka brúsenia: 270 mm, otáčky (min.): 500 ot./min, otáčky (max.): 10 000 ot./min, stredová výška na kľukovom hriadeli: 220 mm, výška stredu: 300 mm, upínacia objímka otvor: 25 mm, otáčky brúsneho vretena: 10 000 ot./min, posuv osi X: 1 m/min, posuvová rýchlosť osi Y: 1 m/min, posuvová rýchlosť osi Z: 1 m/min, rozsah otáčania: 360 °, pojazdová vzdialenosť osi X: 100 mm, zdvih osi Y: 190 mm, zdvih osi Z: 325 mm, šírka v strede: 620 mm, výkon motora brúsiaceho vretena: 1 100 W, dĺžka stola: 190 mm, šírka stola: 200 mm, výška stola: 1 020 mm, výkon: 1,1 kW (1,50 k), typ nastavenia výšky: elektrický, priemer obrobku (max.): 400 mm, vstupný prúd: 20 A, brúsený priemer: 300 mm, vstupná frekvencia: 50 Hz, priemer kotúča: 125 mm, vstupné napätie: 280 V, požadovaná šírka: 2 000 mm, požiadavok na dĺžku priestoru: 1 800 mm, potrebná výška: 1 800 mm, rýchlosť brúsneho kotúča: 10 000 ot./min, rok poslednej generálnej opravy: 2022, vzdialenosť od stola po stred vretena: 325 mm, priemer nástroja: 300 mm, dĺžka obrobku medzi hrotmi: 270 mm, vzdialenosť medzi stredmi: 270 mm, počet vretien: 1, Výbava: otáčky plynule nastaviteľné, Grinding diameter - max. 238 - 620 mm Grinding length 190 mm Workpiece length 380 - 940 mm Spindle speed - stepless 2 - 12000 rpm Power supply 380 kVA Drive power - grinding motor 1.1 kW Total power requirement 2.2 kW Machine weight approx. 0.6 t !!! We have almost all spare parts for Deckel S 11 machines in stock!!! !!! Accessories can be configured as required!!! We also accept your used Deckel S 11 as trade-in – please contact us! DECKEL S 11 TOOL GRINDING MACHINE – UNIVERSAL 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Colour: light grey Motorized height adjustment, axial grinding spindle adjustment Accessories: * Opto-electronic measuring system with measuring electronics, image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head SK 40 with 24-position index plate * One index plate each 14, 16, 18 * Draw bolt M 16 * Counter bearing complete with 4 centres * Centre point SK 40 with driver * Helical and clearance angle grinding attachment with rack housing * Complete dust extraction system without vacuum unit * LED machine light * Tooth support complete with support and guide blades * Setting gauge * Universal setting gauge * Hand wheel assembly * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm in 0.5 mm increments * Collet sleeve, extractor nut and key * 10 direct clamping collets SK 40 for 6 - 25 mm * 4 reducing sleeves SK 40 x MK 1, 2, 3, 4 * Clamping nut Rodpfx Aew U Ehbon Iow * 12 grinding wheel adapters * Tool cabinet with shelves * 2 protective hoods * Various diamond/borazon wheels * Operating manual, operator key, spare parts list, wiring diagram * Set of technical grinding instructions Machine is partially overhauled and comes with electrical test certificate!

Stav: veľmi dobrý (použitý), Rok výroby: 2004, rok poslednej generálnej opravy: 2004, 4-Hi CRM Froehling Rolling Mill Head Froehling is a renowned brand known for reliability and robustness in the field of rolling mills. 4-Hi rolling mill head with bending and coilers. Specifications: Manufacturer: FROEHLING (Germany) – Overhauled in 2004 Processable materials: Aluminium alloys, brass, copper, low carbon steel Strip width: 282 mm (300 mm) Strip thickness: 0.15 – 2 mm Coil size: ID 400 mm – OD 1500 mm Maximum rolling speed: 400 m/min Work rolls: Diameter 130 mm – Table 340 mm Backup rolls: Diameter 390 mm – Table 335 mm Complete with: Uncoiler and recoiler Redjg Ryqkjpfx An Iow Many spare sets of work and backup rolls included Sold EXWORKS, dismantled and loaded onto truck. Ready for inspection by any interested buyer. For any questions, please do not hesitate to contact us. SUBMIT YOUR OFFER IF INTERESTED; WE ARE SURE TO REACH AN AGREEMENT TOGETHER.

Stav: použitý, Rok výroby: 1970, číslo stroja/vozidla: 120895, Pressure: 63 t Throat depth: 250 mm Rsdpfx Ansfx Hv He Iow Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in clamping plate: 110 mm Ram mounting surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable construction via hydraulic adjustment system, tiltable in 4 steps, pass-through opening to the rear (325 x 500 mm) and downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, mode selector switch for setting continuous or single stroke, emergency stop switch, piece counter, various accessories.

Rok výroby: 1980, stav: dobrý (použitý), Stroj na tvarovanie Stellit VOLLMER GF10U Rsdpjgxb Ebefx An Isw Hrúbka listu 1 až 4 mm Šírka pásových píl 60 až 420 mm Kotúčové píly 300 až 1 200 mm priemer Elektrický posuv poháňaný cez prevodový motor

Stav: veľmi dobrý (použitý), Rok výroby: 1999, 1. Bloková přeprava (blokzug) 2. Řetězový dopravník (qwerfoderer) 3. Rychloupínací vozík Linck FWK - Rozchod: 900 mm - Rychlost jízdy vpřed/zpět: 80/180 m/min - Otevírání kleští: 750 mm - Délka dřeva: 2,5–13,5 m 4. Pilařský agregát Linck KCSU-6 - Průměr kulatiny: 120–650 mm - Pohon na každé straně: 160 kW - Maximální výška řezu, trojitý: 405 mm zbytek: 370 mm - Délka dřeva: 2,5–13,5 m - Maximální průchozí šířka: 750 mm - Minimální/maximální šířka řezu: 18–720 mm - Otevírání štípacího klínu: 560 mm - Průměr pilového kotouče: 620 mm - Vzdálenost omezovačů frézy: 370 mm - Čistá hmotnost cca: 15 000 kg - Plynule nastavitelný posuv: 10–35 m/min 3. Odběrné zařízení Bm 1/Mbh 4. Kappovací pila na postranní sortiment Linck KA 1/ACF 5. Kompletní hydraulický systém 6. Kompletní elektroinstalační a řídicí systém 7. Kompletní vnitřní dopravní technika Redpfx Ajxtwwkjn Iow 8. Vykládací mechanizace 9. Odsun pod KCSU Rok výroby: 1998, uvedení do provozu 2000 Různé nářadí Prodej dle zákaznické objednávky.

Stav: nový, VKM supplies spare parts for VKM, Oswald (complete product range), and certain Bezner-Oswald and Wema Probst machines, as well as BÖGLI band saws, and replacement knives made to drawing specifications for a wide variety of woodworking machines. Some parts are available directly from stock. Below is a selection of particularly frequently requested parts: - Centering rollers, bore 40 mm € 112.00/piece Redpfxeg Rn Avo An Isw - Centering rollers, bore 50 mm € 156.00/piece - Feed roller, bore 40 mm € 118.00/piece - Feed roller, bore 50 mm € 138.00/piece - Discharge roller, bore 40 mm € 102.00/piece - Feed roller, bore 50 mm € 126.00/piece - Bezner WP35 peeling disc € 3,920.00/piece - Oswald RM162 guide carriage RM7072W € 302.00/piece - Oswald RM162 knife holder RM7066W € 215.00/piece We would be pleased to provide you with a quotation including commercial terms. Further spare parts are available on request.

Stav: dobrý (použitý), Triediaca linka na dosky / triediaca linka / pozdĺžna triediaca linka Esterer Pravostranný výpad 5 triediacich boxov Rjdpfx Ajgw Scqjn Ijw Celková dĺžka 26 metrov 1. box 2 metre 2. box 3 metre 3. box 4 metre 4. box 5 metrov 5. box >5 metrov dobrý stav – okamžite k dispozícii Umiestnenie: Nemecko, neďaleko Landau an der Isar Prezrite si aj moje ďalšie inzeráty. Teším sa na Vašu požiadavku.

Stav: použitý, No. 3176 WEINIG Hydromat 1000 Planing and Profiling Moulder Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 – 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool cutting circle 125 – 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivelling, pneumatic feed roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 5th spindle horizontal top as sawing spindle Brake motor 37 kW, 5000 rpm Rjdpou Agh Sefx An Iow Diameter 45 mm Axial adjustment reduced to 25 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 6th spindle horizontal bottom as sawing spindle Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment opposite left spindle, axial 35 mm Shortened roller spacing to the right-hand spindles Metre counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers above the table 1 powered, toothed roller in the table, side pressure roller Automatic Waxilit pump/lubricating pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, toothed rollers in outfeed table 2 powered, toothed rollers in machine table Pressure beam before and outfeed after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment for the upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex-location near South Tyrol, without transport and installation Subject to errors in description and pricing Transport and loading by us optionally possible To avoid possible misunderstandings, on-site inspection after appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines – sold as inspected Pictures and videos are for sample purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location