Stroj na ostrenie pílových kotúčov

VOLLMER NS 700

Stav: dobrý (použitý), Zariadenie na upínanie (odkladacie zariadenie) pre pásové píly na kov VOLLMER, model NS700 Nedogqalcjpfx Ahzjcu

Stav: nový, Rok výroby: 2025, Nový brúska na nože s otočným magnetickým stolom, 1200 mm, rýchlosť posuvu saní plynule nastaviteľná, automatický prísun brúsneho kotúča, riadenie PLC, farebný dotykový displej, chladiace zariadenie. Nsdpfswamkvjx Ahzecu

Stav: pripravené na použitie (použité), Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) Nedpovu Hgbofx Ahzocu - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: nový, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Nedpfog Trvrox Ahzocu Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with a fully enclosed worm gear drive. It also features hydraulic pressure control and a base frame that can be rotated by 45 degrees. Additional features include emergency stop, a complete cooling system, factory base frame, automatic shut-off, and quick-release vice.

Rok výroby: 1980, stav: dobrý (použitý), Stroj na tvarovanie Stellit VOLLMER GF10U Hrúbka listu 1 až 4 mm Šírka pásových píl 60 až 420 mm Nsdjgxb Ebspfx Ahzocu Kotúčové píly 300 až 1 200 mm priemer Elektrický posuv poháňaný cez prevodový motor

Stav: použitý, Rok výroby: 1990, Grinding length: 1500 mm Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Cross feed automatic: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Grinding spindle speed: 1400/2800 rpm Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and upgraded with a modern control system. Nodpfxewlvire Ahzocu Machine is equipped with coolant system, automatic vertical feed, dressing device, and wheel mounts.

Rok výroby: 1980, stav: dobrý (použitý), A very well-maintained, cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Ncjdpfx Ahegyy I Ajzou Swing diameter in gap: 800 mm Total length of the gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose (DIN 55022): Size 8 Number of spindle speeds: 18, Range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: - Tailstock - Pneumatic three-jaw chuck with changeable jaws, 315 mm - "MULTIFIX" quick-change tool post, size "C", in front of the centre - Four-way turret behind the centre - Tool holder - Coolant system - Pneumatic follow rest Technical data and dimensions: Subject to change. Video conference via WhatsApp possible by appointment.

Stav: takmer ako nový (použitý), Brúska na profily Utma model P20 Ncjdpfxoff H E Rj Ahzeu

Stav: veľmi dobrý (použitý), Brúska na píly z HSS VOLLMER model CMS 10M Ncodpfji Hchdsx Ahzeu

Rok výroby: 1992, stav: dobrý (použitý), číslo stroja/vozidla: 29-0288, Ponuka 04612 Technické údaje: - Rezací rozsah pri 90° okrúhle: 260 mm - Rezací rozsah pri 90° ploché: 450 x 240 mm - Rezací rozsah pri 45° okrúhle: 230 mm - Rezací rozsah pri 45° ploché: 240 x 200 mm - Stroj je namontovaný na originálnom otočnom kríži - Rozmery pílového pásu: 3660 x 25 x 0,9 mm - Rezné rýchlosti: 20 / 35 / 50 / 70 m/min - Hydraulické zdvíhanie a spúšťanie rámu píly - Rezací tlak plynule nastaviteľný: 0 - 10 m/min - Celkový výkon pohonu: 400 V / 0,8 kW - Zariadenie na chladenie - Potrebný priestor cca: Š 2100 x V 1200 x H 1000 mm Ncedsgin Ndjpfx Ahzsu - Hmotnosť cca: 500 kg