Voumard brúsne vretená, frekvenčný menič REFU HF

Voumard Schleifspindeln REFU HF

Stav: použitý, Rok výroby: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control SIN840D Spindle speeds – infinitely variable 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper HSK 100 Feedrate X/Y/Z axis: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Gjdpfx Abox Tiy Tsxsir Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° B-axis rapid traverse: 10.00 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speeds, stepless: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at faceplate: 1,550 Nm Tool magazine: chain-type magazine, 60 tools Tool diameter: 110 mm Tool diameter with 2 free adjacent pockets: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total power requirement: 80.00 kW Machine weight approx.: 18.00 t Space requirement approx.: 7.50 x 5.50 x H3.50 m 5-axis machining center with SIEMENS Sinumerik 840D control, belt filter unit 980 l, chip conveyor, through-spindle coolant, extraction unit, BLUM tool measurement, probe, Operating mode 4, tool taper cleaning, clamping hydraulics with proportional valve.

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical parts (checked and/or replaced) Wheelhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. Newly painted. Workhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock Disassembled, checked, refurbished. Hydraulics Disassembled, motor checked, hoses and worn or defective parts replaced. Hydraulic block checked. X Axis Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables reground. Z Axis Disassembled, tables reground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully checked, various relays replaced. Paintwork Colors: White RAL 9003 and Grey RAL 7011. Geometry as per manufacturer protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs position: 8460.2920 TECHNICAL SPECIFICATIONS Nominal workpiece length between centers: 600 mm Maximum workpiece length between centers (overhanging headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable riser blocks: 175 => 250 mm Max. workpiece diameter (125 mm center height): 250 mm Godpfjw U Ry Nsx Abxjir Max. workpiece diameter with riser blocks: 350 => 500 mm Table swivel angle each direction: 10° Maximum length for flat surface grinding (maximum width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reverse dwell time: 0-5 sec. Wheel for external grinding, diameter-width-bore: 400x50x127 mm Wheel for surface grinding: 250x13x76 mm Wheelhead spindle speeds: 1500/1700/2200/3600 rpm Wheelhead swivel: 270° Indexed every 90° Wheelhead vertical travel, center height: 125–350 mm Wheelhead transverse travel: 285 mm Hydraulic rapid infeed and retraction travel: 40 mm Intermittent feed per table reversal: 0.001–0.03 mm/diameter Continuous plunge grinding feed: 0–0.9 mm/diameter Micrometric feed stop, graduation: 0.001 mm/diameter Workhead rotation: 360° Infinitely variable workhead speeds, standard/special rpm: 20–400/10–400 Internal taper of workhead/tailstock: 5/3 Morse Wheelhead motor: approx. 4 HP All technical data are given without engagement and subject to error or omission.

Rok výroby: 2011, stav: pripravené na použitie (použité), Horizontálne obrábacie centrum s 5-osým CNC Fanuc riadením, sklápacím stolom s rozsahom 120° a kontinuálnou osou B. Paletový magazín s 10 pozíciami, automatická výmena nástrojov so zásobníkom na 199 nástrojov. Príslušenstvo dodávané s týmto strojom: Triedič triesok, vysokotlakový chladiaci systém cez vreteno so samostatnou nádržou a papierovým filtrom. Gsdpoku A A Hofx Abxjir

Stav: použitý, Rok výroby: 2007, Maximálny priemer sústruženia: 140 mm Maximálna dĺžka sústruženia: 615 mm Ovládanie: C200-4D Priemer vŕtania vretien: 65 mm Otáčky vretena: 5 000 ot./min Krútiaci moment pri 40% / 100% pracovnej záťaži: 145 / 105 kW Revolverové sane: 1, 2 a 3 Pohyb v osi X: 110 mm Pohyb v osi Z: 360 mm Pohyb v osi Y: 70 mm Rýchloposuv X/Y/Z: 25/12/45 m/min Giedewzynqspfx Abxsr Dĺžka pojazdu saní v smere X: 150 mm Dĺžka pojazdu saní v smere Z: 600 mm Otáčky vretena: 5 000 ot./min Os B - korekčná os: +/- 1° Nástrojový revolver - počet staníc: 3 x 12 Upevnenie nástrojov: DIN 69880 VDI 25 x 48 Os C: 0,001° Celková potreba energie: 61 kW Hmotnosť stroja: cca 6,5 t Pôdorysný rozmer (d x š x v): cca 9,75 x 3,10 x 2,85 m Nakladanie: Viackanálový podávač tyčí Breuning Profimat 65,8x270/8, rok výroby 2005 pre tyče s dĺžkou 500-3 000 mm, 8 vodiacich kanálov so vstupnými rúrkami pre vreteno (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Vykladanie: Automat na vykladanie obrobkov BREUNING ILS-REX-7208, rok výroby 2007

Stav: použitý, Rok výroby: 1983, Inner diameter min / max: 10 / 250 mm Grinding depth: 400 mm Outer diameter max.: 380 mm Swing diameter: 390 mm Table travel max.: 550 mm Table stroke min.: 2 mm Rapid traverse: 10 m/min Table speed - stepless: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Swivel angle max.: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid traverse: 0 - 250 mm/min Gijdsvprxfopfx Abxer Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 - new control system (July 2015)

Stav: dobrý (použitý), Rok výroby: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Sealing housing with follow rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Gjdpfx Asvca Rcebxsir Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No guarantee is given for the accuracy, completeness, or currency of the information.

Stav: použitý, Grinding diameter: 350 mm Gisdpfeuxft Esx Abxor Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: dobrý (použitý), Rok výroby: 1962, Rýchlobežná radiálna vŕtačka, radiálna vŕtačka, vŕtačka, konzolová vŕtačka, rýchlobežná radiálna vŕtačka - Upínací stôl: 400 x 1100 mm - Vyloženie ramena: 930 mm - Kuželové uchytenie: MK4 - Výkon motora: 1,35/1,8 kW - Otáčky: 41-1700 ot./min - Stĺp: Ø 200 mm Gsdpjirax Uofx Abxsir - Zdvih vretena: 125 mm - Závitovacie zariadenie: ÁNO - Posuv: 0,075 - 0,3 mm/ot. - Rozmery: 1800/1235/V2240 mm - Hmotnosť: 1500 kg

Stav: dobrý (použitý), Rok výroby: 1998, Hermle C 600 U CNC obrábacie centrum Výrobca: Hermle Typ: C 600 U Rok výroby: 1998 Prevádzkové napätie: 400 V / 3~ Frekvencia: 50 Hz Ovládacie napätie: 24 V Celkový menovitý prúd: 31 A Ovládanie: Heidenhain TNC 426 Hmotnosť stroja: 6400 kg Pohyb v osi X: 600 mm Pohyb v osi Y: 450 mm Pohyb v osi Z: 450 mm Zásobník nástrojov: 30 pozícií Držiak nástrojov, typ: SK-40 Príslušenstvo: k dispozícii podľa fotografií (zvieračka + dotyková sonda) Godsyrr Ucopfx Abxeir Za správnosť, úplnosť a aktuálnosť údajov neručíme.

Stav: použitý, Rok výroby: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Giedpfot Hw N Hex Abxor Machine weight approx.: 7,000 kg Space requirement approx.: m D I S K U S Vertical double-sided surface grinding machine in C-frame design and with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 Serial no.: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x grinding width approx.: 60 x 120 mm Vertical adjustment of quills, each approx.: 150 mm Hydraulic infeed pulses for depth feed: 0.0025 – 0.05 mm Outer diameter of the transport disc approx.: 810 mm Rotary table feed, continuously variable: 14 – 145 mm/s Grinding wheel speed each approx.: (24 m/s) / 765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Total weight approx.: 7,000 kg Accessories / Special Equipment • Workpiece rotary device for round workpiece transport discs with corresponding slots for loading parts and with automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring the ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Continuous speed control of the rotary device according to grinding dimension and workpiece. • Manual grinding wheel infeed via corresponding buttons • Hydraulically swiveling dressing unit (RA) between the two grinding wheels for simultaneous dressing of both grinding wheels with corresponding compensation and automatic repositioning to the effective workpiece thickness after dressing = high time savings, can be manually triggered as well as via a timer. • Ampere meters for both grinding spindle drives * Central lubrication • Mechanical height control of the workpieces with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series. For example: washers, piston rings, hydraulic parts, clock parts, stamped parts, etc. Condition: good – will be ready for demonstration soon Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice