CNC vŕtačka

WEEKE BHX 500

Stav: veľmi dobrý (použitý), 3-axis (X-Y-Z) CNC-controlled FLEXIBLE MACHINING CENTER Moving platen (workpiece), stationary working head – horizontal platen (workpiece) Klodpfx Acjyyvtte Nor PowerControl PC86 powerTouch control (woodWOP software) Safety enclosure for the working head No. 2 workpiece clamps for access to the working area WEEKE pre-positioning unit – enables faster positioning of workpieces in the machine with clamps Support table (workpiece support) at infeed – outfeed table (with powered conveyor belt) Equipped with automatic panel pusher Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) No. 2 workpieces can be machined simultaneously (in Z-axis) Separate control cabinet and operator console WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (swivelling 90° in X-Y direction), diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (swivelling 90° in X-Y direction), diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW)

Stav: dobrý (použitý), Rok výroby: 2019, CNC throughfeed centre with dual gripper drive in X-direction and portal design in Y-direction. The second gripper enables formatting down to 15 mm as well as continuous milling movement in the X-direction. The workpiece is measured in length (X-direction) via sensor. Working area: X-axis 3,500 mm Y-axis 950 mm Z-axis 80 mm Milling spindle 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Max. tool diameter 120 mm Max. tool length 100 mm Single pick-up station for ergonomic loading or unloading of tools into the machine. Can also be used as an additional tool station for 11 virtual tools. Automatic tool length measuring system in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter 8 mm, lengths 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with - CNC board (general machine operation) Klodpfx Acexrahco Nor - Tool database (Tecno-Manager) - Programming editor External workplace license Dongle upgrade 3D simulator with collision detection for WOODFLASH on the machine Release of workpiece at the rear of the machine Machine delivered without tools and HSK holders.

Stav: dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, celková hmotnosť: 5 000 kg, CNC obrábacie centrum WEEKE OPTIMAT BHX 500 vrátane podávania materiálu „IgeL-ROBOT“ Podpora spracovania dole Podpora spracovania hore Dĺžka obrobku: min. 250 - max. 2500 mm Šírka obrobku: min. 70 - max. 1000 mm Hrúbka obrobku: min. 4 mm – max. 80 mm Stohovanie obrobkov: max. 2 kusy Vektorová rýchlosť: os X skľučovadlá = 138 m/min; os Y = 80 m/min; os Z = 50 m/min Výbava hore, dole: VERTIKÁLNA VŔTACIA JEDNOTKA 2 V 21 HIGH SPEED 7500 HORIZONTÁLNA VŔTACIA JEDNOTKA 2H4X/2Y Klsdoyyb N Hopfx Ac Nsr DRÁŽKOVACIA PÍLA N2 X-Y 90 FRÉZOVACIA JEDNOTKA F2-ETP- 6 KW Čítačka čiarových kódov výrobca: Datalogic

Stav: použitý, Rok výroby: 2007, Funkcionalita: plne funkčný, Na predaj: vertikálne CNC obrábacie centrum Weeke Optimat BHX 500, rok výroby 2007, určené na vŕtanie, frézovanie a drážkovanie plošných materiálov v nábytkárskom priemysle. Stroj umožňuje rýchle a presné obrábanie dielcov a je vhodný pre sériovú aj zákazkovú výrobu nábytku. Technické parametre: Model: Weeke Optimat BHX 500 Rok výroby: 2007 Typ stroja: 3-osé kontinuálne CNC obrábacie centrum CNC riadenie: WoodWOP (Homag / Weeke) Maximálna dĺžka obrobku: cca 3050 mm Maximálna šírka obrobku: cca 1200 mm Maximálna hrúbka obrobku: 80 mm Minimálna dĺžka obrobku: cca 200 mm Minimálna šírka obrobku: cca 70 mm Výbava: Vŕtacia hlava s viacerými vertikálnymi a horizontálnymi vretenami 96 vŕtacích vreten (48 horných, 48 spodných) Ksdpoywgb Nefx Ac Nelr 36 vertikálnych nástrojov 12 horizontálnych nástrojov Drážkovacia píla Fréza (horná a spodná) Píla 125 mm, otočná o 90° Automatická upínacia doprava obrobkov Použitie: Vŕtanie pre kolíky a kovanie Frézovanie a drážkovanie Obrábanie DTD, MDF, HDF, preglejky a masívneho dreva Výhody: Možnosť súčasného obrábania dvoch kusov, výrazné zvýšenie produktivity Rýchle prestavovanie a výmena obrobkov Vysoká presnosť vŕtania a frézovania Ideálne na výrobu korpusového nábytku, kuchýň, skríň a interiérových prvkov Stav: Stroj je pravidelne servisovaný a plne funkčný Možnosť odskúšania pri obhliadke Dodanie: jún 2026

Stav: nový, Rok výroby: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable Kljdoug Ty Hopfx Ac Njr 1st unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 3rd unit, brush: Scotch-Brite Hard / diameter 220 mm, variable drive 4th unit, brush: Scotch-Brite Hard / diameter 220 mm, variable drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Rok výroby: 2011, stav: pripravené na použitie (použité), Hlavný pohon Počet osí: 3 Tento 3-osový stroj HOMAG WEEKE OPTIMAT BHX 500 bol vyrobený v roku 2011. Disponuje robustným CNC obrábacím centrom s pracovnou plochou 2500 mm x 1300 mm, hlavným elektrovretenom s výkonom 6 kW a maximálnou hrúbkou panelu 80 mm. Obsahuje 84 vŕtacích jednotiek a dvojité frézovacie vretená, každé s výkonom 6 kW pri 18 000 ot./min. Ak hľadáte kvalitné CNC spracovanie, zvážte stroj HOMAG WEEKE OPTIMAT BHX 500, ktorý máme na predaj. Kontaktujte nás pre viac informácií. Kledpfxex D Nvgo Ac Ner Typy aplikácií CNC obrábanie dreva

Stav: pripravené na použitie (použité), Rok výroby: 2007, Funkcionalita: plne funkčný, TECHNICKÉ ÚDAJE Dĺžka obrobku: min. 250 – max. 2500 mm Šírka obrobku: min. 70 – max. 1000 mm Hrúbka obrobku: min. 4 mm – max. 80 mm Ukladanie obrobkov: max. 2 kusy Vertikálna vŕtacia jednotka 2V21 HIGH SPEED 7500 Ksdpjyg E R Hjfx Ac Njlr Zdvih v os Z: 60 mm Hĺbka vŕtania: max. 38 mm Smer otáčania: doprava/doľava Otáčky: 1 500 – 7 500 ot./min, regulované frekvenciou Pohon: 2 x 2,7 kW Upínanie vrtáka: d = 10 mm Celková dĺžka vrtáka: 70 mm Priemer vrtáka: max. 35 mm Rozstup vretien: 32 mm Typ vretena: samostatne ovládateľné Horizontálna vŕtacia jednotka 2H4X/1Y Po 4 vrtacích vretenách v osi X Po 1 vrtacom vretienku v osi Y Hĺbka vŕtania: max. 38 mm Výška vŕtania v osi Z: 38 mm od hornej hrany obrobku Smer otáčania: doprava/doľava Otáčky: 1 500 – 7 500 ot./min, regulované frekvenciou Upínanie vrtáka: d = 10 mm Celková dĺžka vrtáka: 70 mm Priemer vrtáka: max. 20 mm Typ vretena: samostatne ovládateľné Drážkovacia pílová jednotka N2 X-Y 90° Hĺbka rezu: 30 mm Prierez obrábania: max. 70 mm² Otáčky: 1 500 – 7 500 ot./min, regulované frekvenciou Priemer nástroja: 125 mm Hrúbka kotúča: max. 5 mm Frézovacia jednotka F2-ETP-6 KW Upínanie nástroja: pre upínaciu stopku d = 25 mm Priemer nástroja: max. 60 mm Vyloženie nástroja: min. 65 mm / max. 95 mm Hmotnosť nástroja: max. 2,5 kg Vkladanie nástroja: manuálne, rýchloupínací hydraulický systém ETP 25 Smer otáčania: doprava/doľava Otáčky: 6 000 – 18 000 ot./min, plynulo programovateľné Pohon: frekvenčne riadený trojfázový motor Max. výkon na nástroji: do 5/6 kW pri trvalej/pulznej prevádzke (S1/S6-50%) VYBAVENIE Zariadenie na podávanie materiálu "IgeL-ROBOT" Podporný stôl pre obrábanie - spodný Podporný stôl pre obrábanie - horný Vertikálna vŕtacia jednotka 2V21 HIGH SPEED 7500 Horizontálna vŕtacia jednotka 2H4X/2Y Drážkovacia pílová jednotka N2 X-Y 90° FRÉZOVACIA JEDNOTKA F2-ETP-6 KW Čítačka čiarových kódov, výrobca: Datalogic

Stav: nový, Rok výroby: 2026, Zostavenie systémov na manipuláciu s korpusmi pre vytvorenie manuálnej, poloautomatickej alebo plnoautomatickej montážnej linky na korpusy sa vždy vykonáva podľa požiadaviek zákazníka. Montážne linky na korpusy, ktoré vám uľahčia prácu, skrátia nastavovacie časy a zvýšia výrobnú kapacitu, vám radi podrobne vysvetlíme pri osobnom stretnutí. Klodpfxodx R D De Ac Nsr

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Centre with one processing support each, top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pcs. Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both the upper and lower processing supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both the upper and lower processing supports, each with 10 drilling spindles, individually selectable via program. 8 drilling spindles each in X direction 2 drilling spindles each in Y direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower processing supports for machining in X-Y direction, swivellable by 90°. Cutting depth: 30 mm GROOVING SAW BLADE SUPPLEMENT Saw blade width can be 8.4 mm. Cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Kodpfx Acjx S Hzle Nolr Milling unit arranged in both upper and lower processing supports, suitable for holding shank-type tools. Manual tool change. Tool clamping: manual, ETP 25 hydraulic quick-clamping system Rotation: CW/CCW Speed: 6,000 – 18,000 rpm, steplessly programmable Machining up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece removal area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Stav: pripravené na použitie (použité), Rok výroby: 2010, číslo stroja/vozidla: 0-250-12-2554, Funkcionalita: plne funkčný, dĺžka obrobku (max.): 1 000 mm, šírka obrobku (max.): 3 000 mm, výška obrobku (max.): 80 mm, model regulátora: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control system: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading station with air-cushion table Powered roller conveyor for panel evacuation Klsdpfeydnu Njx Ac Njr Option for simultaneous processing of two panels

Stav: použitý, Rok výroby: 2011, Base machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced over the entire machine bed with welded-in components, making it extremely rigid. The table design used, with a large base, is the key to ensuring long-term precision and stability. The machine layout allows the user an optimal workflow with minimal space requirements. The mobile gantry is constructed as a solid monoblock. It is positioned in the X-direction on prismatic, ground rails via recirculating ball-bearing carriages. On this mobile unit carrier, the working unit is again mounted on prismatic, ground guides and ball-bearing carriages. AXIS MOVEMENT All axis displacement is carried out on prism linear guides with large cross-sections and recirculating ball carriages with a large contact surface, guaranteeing optimal movement even at the highest speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via a helical pinion and rack system. Recirculating ball screws with a large cross-section ensure accurate positioning of the working unit along the moving gantry (Y- and Z-axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumpers and light barrier 1 Bumpers with sensors are installed around the movable gantry, and a light barrier system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower value of 25 m/min without stopping the machine. The system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions found in pressure mat systems. This prevents unwanted interruptions to the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard 1 Side and rear protective fencing Kledpexy Tmnsfx Ac Njr Automatic central lubrication system regulated via CNC controller 1 Lubrication of the X, Y, and Z axes is regulated via the CNC controller at regular intervals without manual intervention on the machine. Central extraction nozzle 1 All individual extraction nozzles of the machining units are combined into one central nozzle. Within the nozzle, various slide valves are controlled via the NC controller. This reduces the required extraction airflow. Chip conveyor 1 Maxi - 5-axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle delivering 11 kW at 20,000 rpm (S1, 100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F 18 kW inverter for stepless, uniform power delivery Max. rotation: B-axis = 200° (+/- 100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to execute complex horizontal positioning in a small workspace. This allows the machining of complex geometries without the risk of collision.

Stav: veľmi dobrý (použitý), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Movable table (workpiece), stationary working head – horizontal table (workpiece) PowerControl CNC controller (woodWOP software) Working head safety enclosure No. 2 safety interlock workpiece clamps in the working area WEEKE pre-positioning unit – for faster workpiece positioning in machines with clamping grippers. Kjdpfxslkdpme Ac Nolr Infeed support table (workpiece support) – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) With separate electrical and control cabinets WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (X-Y direction, swivels 90°), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) WORKING UNITS (BOTTOM): No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (X-Y direction, swivels 90°), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stav: veľmi dobrý (použitý), Rok výroby: 2007, prevádzkové hodiny: 23 983 h, Funkcionalita: plne funkčný, dĺžka obrobku (max.): 2 500 mm, šírka obrobku (max.): 1 000 mm, výška obrobku (max.): 80 mm, maximálna rýchlosť vretena: 7 500 ot./min, TECHNICAL DETAILS Workpiece length: 200 – 2,500 mm Workpiece width: 70 – 1,000 mm Workpiece thickness: 4 – 80 mm Performance and Operation Operating power: 21 kW Software: WoodWop 4.5 Feed Rates Rapid traverse X-axis: 130 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Klsdewi Inzopfx Ac Nor Spindle Spindle speed: 1,500 - 7,500 rpm Compressed Air and Extraction Compressed air requirement: 7 bar Dust extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Weight: 5.5 t Operating hours: 23,983 h Workpiece counter: 102,199 pcs

Stav: použitý, Rok výroby: 2005, Funkcionalita: plne funkčný, Výrobca: HOLZMA Model: OPT HPP 350/43/43/X Typ stroja: Lúčová píla Rok výroby: 2005 Prevádzkový stav: stále pripojený Dĺžka rezu: 4.300 mm Zdvih podávača: 4.250 mm Počet uchopovačov: 6 Maximálna posuvná rýchlosť: 130 m/min Plynule nastaviteľný posuv Klsdpfx Acsxwwfve Nor Vyloženie pílového kotúča: 80 mm Maximálny priemer pílového kotúča: 350 mm Výkon hlavného motora: 9 kW Predrývacia píla: Áno Strana dorazu: pravá strana Ovládanie: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Značka zhody: CE Hmotnosť: 5 000 kg

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Machining Centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Kledpfx Aoh E Sghec Njr Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivelable 90° X-axis feed speed: 130 m/min Y-axis feed speed: 80 m/min Z1-axis feed speed: 50 m/min Z2-axis feed speed: 27 m/min Spindle speed: 18,000 rpm Dismantled – available immediately