Viacvretenová vŕtačka

WEEKE BST 500 D

Stav: neskontrolované (použité), Rok výroby: 2006, Funkcionalita: neoverené, pojazdová vzdialenosť osi X: 4 400 mm, zdvih osi Y: 1 300 mm, posuv osi X: 40 m/min, posuvová rýchlosť osi Y: 45 m/min, Výbava: Označovanie CE, The machine has the following configuration: Drilling groups: Upper group with 30 vertical and 6 horizontal spindles Milling group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, located at the working head TECHNICAL DETAILS Travel distance X-axis: 4,400 mm Travel distance Y-axis: 1,300 mm Maximum workpiece through-feed height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Individual vacuum pump capacity: 250 m³/h Connected load: 35 kW Dedpfeyzy S Nex Ad Njur EQUIPMENT Worktable with suction bars Number of suction bars: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Stav: neskontrolované (použité), Rok výroby: 2012, Funkcionalita: neoverené, šírka rezania (max.): 4 500 mm, posuv osi X: 140 m/min, dĺžka sekcie (max.): 2 200 mm, Výbava: Označovanie CE, dávkovač, TECHNICAL DETAILS Dusdpeyxn Adofx Ad Njr The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter of saw unit: 380 mm Maximum tool diameter of scoring unit: 200 mm Saw blade projection: 95 mm Number of longitudinal saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Connected load saw unit 1: 15 kW Connected load saw unit 2: 15 kW Connected load scoring unit 1: 2.2 kW Connected load scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and the use of the machine at the destination. External reference: 5711

Rok výroby: 2007, stav: neskontrolované (použité), Funkcionalita: neoverené, celková dĺžka: 5 700 mm, celková šírka: 1 000 mm, dĺžka obrobku (max.): 2 000 mm, šírka obrobku (max.): 800 mm, Výbava: Označovanie CE, TECHNICKÉ DETAILY Max. šírka panelu: 800 mm Min. dĺžka panelu: 140 mm Max. dĺžka panelu: 2 000 mm Dĺžka pásu: 5 700 mm Djdpfoyzzhxex Ad Nour DETAILY STROJA Rozmery (D x Š): 5 700 x 1 000 mm Návrat dielov k olepovačke hrán: Vľavo Vykladanie panelu: pomocou vzduchového vznášadlového stola Posuv panelu: motoricky poháňaný pás VYBAVENIE Bezpečnostná norma CE Stroj sa predáva a dodáva v skutočnom technickom a právnom stave („ako je videné a páči sa“), na základe fotodokumentácie a technických/obchodných podkladov s opisným charakterom. Kupujúci má právo si tovar pred prevzatím prehliadnuť a nesie zodpovednosť za inštaláciu, zabezpečenie a používanie stroja na mieste určenia. Externá referencia: 6200

Stav: neskontrolované (použité), Rok výroby: 2014, Funkcionalita: neoverené, výška obrobku (max.): 60 mm, maximálna hrúbka hrany: 20 mm, posuv osi X: 30 m/min, model regulátora: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner trimming unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Rounding unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for rolls Melt adhesive tank Pressure roller unit for the edge Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. Dodpfjyzy Iwox Ad Neur External reference: 6089

Stav: neskontrolované (použité), Rok výroby: 2016, Funkcionalita: neoverené, maximálna hrúbka hrany: 22 mm, otáčky (max.): 12 000 ot./min, Výbava: Označovanie CE, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and radius unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Buffing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Duodjyxndbopfx Ad Nsr Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7673

Stav: veľmi dobrý (použitý), AUTOMATICKÁ VIACVRETENOVÁ VŔTAČKA „WEEKE“ Stroj je možné pracovať v rade so ďalšími strojmi Ovládanie: Power Control Softvér: WoodWop (TOPDRILL BST 500) Dopravné pásy (počet): 2 (rýchlosť posuvu nastaviteľná) Horizontálne vŕtacie podpery (počet): 2 Vŕtacie jednotky na každý horizontálny podper (počet): 2 Vretená na každú horizontálnu vŕtaciu jednotku (počet): 11 Max. pracovná šírka (mm): 3000 Min. pracovná šírka (mm): 250 Spodné vertikálne vŕtacie podpery (počet): 6 Vŕtacie jednotky na každý spodný vertikálny podper (počet): 2 Vretená na každú vŕtaciu jednotku spodných podpier (počet): rôzne Dodpfxeh Ryhne Ad Njur Horné vertikálne vŕtacie podpery (počet): 2 Vretená na každú vŕtaciu jednotku horných podpier (počet): 2 Vretená na každú vŕtaciu jednotku horných podpier (počet): Horné vertikálne upínače obrobku (počet): 6 Odvod triesok pásovým dopravníkom Digitálne zobrazenie polohových údajov (os) Celkový inštalovaný výkon (kW): 26

Stav: generálne opravený (použitý), PC control unit, model Power Control Professional Duedpfxodz Uk Te Ad Nor Software: woodWOP / TopDrill BST Number 2: Motorized throughfeed conveyor belts (4 x kW?) Number 2: Horizontal drilling supports (digital display of position data for axes) Number 1: Drilling unit for each horizontal drilling support (1 x 1.5 kW) Number 21: Spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Number 4: Lower vertical drilling supports (digital display of position data for axes) Number 2: Drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports Number 2: Upper vertical drilling supports (digital display of position data for axes) Number 2: Drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports Number 4: Upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36