Stredový sústruh

WEILER Condor B

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Technical data: - Machine No.: 2442, Year of manufacture: 1997 - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread types: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments Iodpfx Aoxcuazsfpea - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: dobrý (použitý), Funkcionalita: plne funkčný, used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing diameter over bed: Ø 330 mm Centre height over bed: 165 mm Swing diameter over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor, stages 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Features & Accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick-change collet chuck and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake, selectable - 2x Emergency stop - Electric chuck key detection (via sleeve with pushbutton) - Coolant tank with pump in machine base - Foldable chuck guard - Splash guard - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg Iodpfxovadqzo Afpoa This newer generation of Weiler lathes is very operator-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Subject to prior sale.

Stav: dobrý (použitý), Rok výroby: 1992, 1 použitý hrotový sústruh s vodicou a ťažnou skrutkou Značka: Weiler Typ: Condor B Rok výroby: 1992 Technické údaje: Vzdialenosť medzi hrotmi: 750 mm Výška hrotu: 165 mm Priechod vretena: 40 mm Otáčky: 22 – 2800 ot./min Koník: MK 3 Výkon pohonu: 1,6 / 3,2 kW Hmotnosť: 1040 kg Rozmery: 1.850 x 880 x 1.290 mm Iedpfx Afjw Rcd Sjpsa Vybavenie: Digitálne odpočítavanie v 3 osiach Trojčeľusťové skľučovadlo Ochranný kryt skľučovadla

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 165 mm, šírka v strede: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B sits in terms of size between the Weiler Praktikant and Weiler Commodor, making it a true all-rounder for any workshop. The machine has been extensively partially overhauled in our workshop, ensuring it is in outstanding technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers can be shifted smoothly. You are welcome to inspect the machine on site. Availability: On request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mount: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Isdpfx Afew N Np Sepja Speed range: 22–2800 rpm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28mm Spindle brake: Switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop buttons, leadscrew and feed rod cover (optional), operating manual, and more upon request... Our Service Promise to You: - We are a certified master craftsman business in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced beforehand - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or installation for you

Stav: dielensky repasované (použité), Rok výroby: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post, base body size B - Bed stop - Coolant system - Chip guard/rear panel Iedpfxjg R S Rce Afpsa - Operating manual - Used, as seen -

Stav: dobrý (použitý), Rok výroby: 1988, Weiler lathe Model Condor B 2-axis digital readout Center height: 165 mm Center distance: 750 mm Ijdpfx Aevgmbvefpsa Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2,800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp Automatic longitudinal and face feed Spindle brake - Hinged chuck guard - Splash guard Weight: approx. 1,040 kg 3-jaw chuck Multifix B quick-change toolpost Live center

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet Iedpfxew Nw Dqe Afpsa For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-axis Digital Readout by K&C, NEW Geometrically overhauled, with acceptance protocol for tolerances according to new machine standards!! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Iodpfx Afovambcjpsa >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer’s warranty with manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool programming (200 item memory), taper calculation, radius/diameter switch, quick zero, count direction selection >> Collet chuck system, brand new collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> New Multifix size A with 2 tool holders, NEW >> Bed stop >> Electric chuck guard, NEW >> LED machine lamp, NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. The slideways have been newly ground or hand-scraped. Acceptance according to inspection protocol. A very fine machine with electronic spindle protection. Accessories such as collets, chuck, and Multifix quick-change toolpost are all new. Spindle, spindle nuts, bearings, belts, and wipers have been replaced. You are welcome to inspect the machine under power on site and convince yourself of its condition.