Stredový sústruh

Weiler Primus

Stav: dobrý (použitý), Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Priemer vŕtania vretena: 23 mm Otáčky: 40 – 3000 ot/min Plynule nastaviteľný pohon s 3-stupňovou prevodovkou a digitálnym ukazovateľom otáčok Koník: MK 2 Výkon pohonu: 1,5 kW Iedpfxow I A Uxs Afpoa Hmotnosť: 350 kg Rozmery: 1200 x 650 x 1330 mm Lakovanie: Resedová zelená RAL 6011. Digitálny displej: Na požiadanie za príplatok Príslušenstvo: Ďalšie príslušenstvo na vyžiadanie

Stav: použitý, Swing diameter over bed: 250 mm Swing diameter over cross slide: . mm Distance between centres: approx. 400 mm Ijdpfx Aewa Dz Esfpoa Centre height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions (L x W x H): approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drill and turning jaws; Collet chuck system incl. collets 1-20 mm, 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with shut-off switch.

Stav: použitý, Rok výroby: 1999, Funkcionalita: plne funkčný, Sústruh Weiler Primus VC, rok výroby 1999, s trojosou digitálnou indikáciou Siemens, trojčeľusťovým skľučovadlom, Multifixom, zadným krytom proti striekaniu a elektrickým krytom skľučovadla. Stroj je v dobrom, prevádzkyschopnom stave, po dohode možná prezentácia pod prúdom. Iedpfx Aex Afvgofpja

Stav: pripravené na použitie (použité), Weiler Primus sústruh Presný sústruh s príslušenstvom Weiler Primus sústruh: Výška hrotu: 125 mm Rozsah otáčok: 40-3000 ot./min Vzdialenosť medzi hrotmi: 400 mm Priechod vretena: 24 mm Príslušenstvo: 35 ks upínacích klieští Skľučovadlo 4 ks držiakov Multifix Skrinka na príslušenstvo Ďalšie príslušenstvo viď fotografie Radi vás privítame na obhliadke. Na požiadanie vám zabezpečíme aj cenovo výhodnú prepravu! Iedpsxw R N Ujfx Afpja Obdržíte riadnu faktúru. Pre zahraničných zákazníkov je možné vystaviť faktúru bez DPH, podmienkou je platné IČ DPH. Predaj vyhradený do vypredania zásob. Navštívte náš obchod a pozrite si aj naše ďalšie ponuky. Uvedené obchodné mená a ochranné známky patria ich majiteľom a slúžia len na identifikáciu a popis produktov. Možné odchýlky v technických údajoch a chyby v popise vyhradené.

Stav: vyžaduje opravu (použité), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Iodpfx Aed Hl Stsfpoa Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed rate longitudinal: 6.3 to 1,250 mm/min Feed rate cross: 6.3 to 1,250 mm/min Connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Isdpfou Aftgsx Afpja >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou Isdpfx Aexw H Dbjfpoa - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: takmer ako nový (použitý), Rok výroby: 2022, Heliumový detektor úniku Isdpfx Ast Urlrjfpea Výrobca: Leybold Typ: Phoenix Quadro EU Stav: Ako nový, pripravený na použitie, vyrobený v roku 2022, nepoužitý Pripojenie: 230V Dodacia lehota: zo skladu (podľa dohody)

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages Ijdpfx Ajrtd Uwsfpsa - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Ijdpfswkh Abex Afpja Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1, fitted with a 3-axis TNC113 active control, which stands out, in particular, for its ease of use. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings in the milling head replaced - Machine repainted - Various standard components such as handles, oil sight glasses, buttons, etc. replaced - Worn parts (e.g., drive belts) replaced - Bellows partially replaced - Gib strips adjusted - and much more... Delivery: Immediately Year of manufacture: 1989 Machine no. 2102-xxxx Table: fixed angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Power connection: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master enterprise specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance Ijdpfx Aepy Eldjfpea - On request, we can fully or partially overhaul your selected machine - Upon request, you can order additional accessories such as tooling etc. directly - Upon request, we can mount additional accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation for you

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 Isdpfevkfhpox Afpja - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Ijdevivmyepfx Afpsa Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, MITUTOYO Contracer CV-2100M4 Kontúrmérő gép Mérési tartomány vízszintesen (X): 100 mm Mérési tartomány függőlegesen (Z): 50 mm Oszlop elmozdulási tartománya (Z2): 350 mm Isdpfevun Tpsx Afpja Dőlés: +/- 45° Méretek (SzéxMéxMa): 745 mm x 450 mm x 885 mm Teljes tömeg: kb. 150 kg Tartalmazza: PC-rendszer Tartalmazza: 218-001 kereszttáblát Tartalmazza: 2028-003 forgatható satu

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg Iedpfx Afow Idllopea >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.