Paralelný sústruh

WEILER PRIMUS

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Sústruh Weiler Primus vo vynikajúcom stave. Možnosť predvedenia pod prúdom. Technické údaje: Prjdpfexzi I Dsx Afped Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Vretenová priechodnosť: 23 mm Otáčky: 30 – 3000 ot/min Koník: MK 2 Výkon pohonu: 1,5 kW Hmotnosť: 350 kg Rozmery: 1200 x 650 x 1550 mm

Stav: pripravené na použitie (použité), Weiler Primus sústruh Presný sústruh s príslušenstvom Weiler Primus sústruh: Výška hrotu: 125 mm Rozsah otáčok: 40-3000 ot./min Vzdialenosť medzi hrotmi: 400 mm Priechod vretena: 24 mm Príslušenstvo: 35 ks upínacích klieští Skľučovadlo 4 ks držiakov Multifix Skrinka na príslušenstvo Ďalšie príslušenstvo viď fotografie Radi vás privítame na obhliadke. Na požiadanie vám zabezpečíme aj cenovo výhodnú prepravu! Obdržíte riadnu faktúru. Pre zahraničných zákazníkov je možné vystaviť faktúru bez DPH, podmienkou je platné IČ DPH. Predaj vyhradený do vypredania zásob. Navštívte náš obchod a pozrite si aj naše ďalšie ponuky. Uvedené obchodné mená a ochranné známky patria ich majiteľom a slúžia len na identifikáciu a popis produktov. Prjdpfxjxw R N Uo Afpod Možné odchýlky v technických údajoch a chyby v popise vyhradené.

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou Pjdpfoxw H Dbsx Afpsrd - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Prodeu Aftgspfx Afpsd >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B Pedpfortd Uwox Afpord - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Psdpfxsvtp Eds Afperd Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Prodswkh Abspfx Afped Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment Prjdpfovkfhpjx Afpjd About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 Pedpjvivmyjfx Afpord >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself. Prodsw Idllspfx Afpjd