Chopper

Weima WL 4

Stav: použitý, Feeding opening: 800x600 mm Motor power: 18.5 kW Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Operating hours: 1741 h Dimensions (L x W x H): 1650x1200x1595 mm Loading dimensions (L x W x H): 1650x1200x1800 mm Weight: 1300 kg WEIMA Shredder WL 4, machine fully inspected Fpodpfx Ajyrtzwocxsd ----- Note: The machine has been fully inspected by us, operates flawlessly, see video. Blades and pusher plate were already replaced by the previous owner. Drive belt was replaced during our inspection. 1741 operating hours Description: The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving significant volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor, with automatic and load-dependent control. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted on cardan joints to avoid lateral forces on the piston seals. The patented and profiled V-rotor, made from solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive and four-way reversible knives/cutting crowns are located in milled pockets on special knife holders. This patented system guarantees, by allowing the reduction of the cutting gap between the counter knife and rotor for the first time, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen located beneath the rotor determines the chip size (10–100 mm). A hydraulically opening screen basket is also available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Technical Data WL 4 / 18.5 kW ----- Feeding opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Working width of rotor: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Including: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concave-ground reversible cutting crowns (40 x 40 mm) Star/delta starter Vibration-damping base V-rotor (patented) with profiled, milled knife pockets (Technical information according to manufacturer – no guarantee!)

Stav: použitý, prevádzkové hodiny: 1 250 h, celková hmotnosť: 1 500 kg, priemer rotora: 252 mm, celková dĺžka: 1 800 mm, celková výška: 2 000 mm, celková šírka: 1 200 mm, šírka rotora: 600 mm, výkon: 18,5 kW (25,15 k), otáčky (max.): 90 ot./min, šírka plniaceho otvoru: 600 mm, dĺžka plniaceho otvoru: 800 mm, No. 3255 Single-shaft shredder / WEIMA WL 4 Shredder Used, approx. 1,250 operating hours Quiet-running and slow-speed V-rotor system Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening: 800 x 600 mm (W x D) Reversible knives, concave ground Automatic / manual operation Screen perforation: 15 mm Extraction port: 160 mm Transport dimensions: approx. 1,800 x 1,200 x 2,000 mm (L x W x H) Weight: approx. 1,500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation Dismantling, loading, and transport by us available optionally Subject to errors in description and price To avoid possible misunderstandings, a site inspection by appointment is possible and recommended Sale as-is Technical data, description of condition, year of manufacture, and scope of delivery as per manufacturer brochure and/or previous owner, without guarantee Subject to prior sale No warranty for used machines; the sale is made on an "as viewed" basis Pictures and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Fodpfxsx Hhk Re Acxepd Delivery terms: ex location

Stav: veľmi dobrý (použitý), prevádzkové hodiny: 820 h, Residual Wood Shredder WEIMA Model: WL 4 Feed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Throughput: dependent on material and screen Rotor diameter: 252 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Tools: 14 knives Screen perforation: 20/25 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec Weight: approx. 1,200 kg Dimensions (L x W x H): 1600 x 1150 x 1655 mm Including all documentation Note on used machines: Fedjylaf Ajpfx Acxjpd • Technical details are subject to errors and prior sale. • Quoted prices are ex works - free loading! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stav: použitý, Rok výroby: 1993, Výkon: 18,5 kW Počet nožov: 28 Hmotnosť: 1300 kg Drvič WEIMA WL 4 - Rok výroby: 1993 - Sériové číslo: 500/1695 - TOP stav, málo používaný Technické údaje: - Otvor násypky s Logspacer: 600 x 1000 mm - Objem násypky: 0,6 m³ Fpjdpfoyk H Tqsx Acxsd - Pracovná šírka rotora: 600 mm - Priemer rotora: 252 mm - Výkon pohonu: 18,5 kW - Otáčky rotora: 80 - 120 ot./min. - Počet nožov: 28 kusov - Typ a veľkosť nožov: 40 x 40 mm - Lakovanie WEIMA štandard RAL 2002 / 7016 - Prípojná hodnota: 380 V +/- 5% / 50 Hz - Hmotnosť: 1.300 kg

Stav: použitý, Rok výroby: 1991, celková dĺžka: 1 660 mm, celková výška: 1 470 mm, celková šírka: 1 100 mm, Prevádzková hmotnosť: 1.300 kg - Rok výroby: 1991 - Dokumentácia k dispozícii: Nie - CE certifikát: Nie - Sériové číslo: 500-1014 - Výkon hlavného motora [kW]: 18,5 - Šírka rotora [mm]: 600 - Šírka otvoru [mm]: 600 - Dĺžka otvoru [mm]: 800 - Perforácia sita [mm]: 15 - Počet rotujúcich nožov [ks]: 1 - Prepravné rozmery: 1660mm x 1100mm x 1470mm (d x š x v) - Prepravná hmotnosť [kg]: 1300 kg - Počet prepravných balíkov [ks]: 1 Fpjdowu Uy Iopfx Acxjd Finančné informácie DPH: Uvedená cena je bez DPH DPH/rozdielové zdanenie: Pre podnikateľov je DPH odpočítateľná Dodanie a výkup možný kedykoľvek pre všetky priemyselné oblasti Yorick Diebels

Stav: nový, Rok výroby: 2025, Rok výroby: 2025/2 Výkon motora: 18,5 kW Fjdpevw Tw Ejfx Acxspd Rýchlosť: 90 ot./min Hmotnosť: 1,3 t Dĺžka rotora: 600 mm Priemer rotora: 252 mm Nože rotora: 28 ks Hrdlo násypky: 600 x 1050 mm so zvlášť rebrovanou posuvnou doskou

Stav: nový, Rok výroby: 2025, Rok výroby: 2025/2 Výkon motora: 18,5 kW Fpedorq Eu Repfx Acxed Otáčky: 90 ot./min. Hmotnosť: 1,3 tony Dĺžka rotora: 600 mm Priemer rotora: 252 mm Nože rotora: 28 ks Lievik: 600 x 1050 mm

Stav: ako nová (výstavný stroj), Rok výroby: 2026, Tichý a pomalobežný drvič WL 4/18,5 kW Technické údaje: Otváranie násypky: 600 x 800 mm Otváranie násypky s logspacerom: 600 x 1050 mm Objem násypky: cca 0,6 m³ Pracovná šírka rotora: 600 mm Priemer rotora: 252 mm Fodpfx Aobtnftocxepd Počet nožov: 28 ks Nože: 40 x 40 mm, konkávne Veľkosť otvorov sita: 15/20 mm Vrátane: Rozvodná skriňa Elektrické ovládanie Hviezdo-trojuholníkový rozbeh Gumové tlmiace prvky 2. rad nožov Logspacer (samospádová násypka) Najvyššia výbava Lokalita: Na sklade v Bitburgu – ihneď k dispozícii – za akciovú cenu

Stav: ako nová (výstavný stroj), Rok výroby: 2026, Quiet and slow-running shredder WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Knives: 40 x 40 mm, concave Fodpfjbunq Hox Acxepd Screen perforation: 15/20 mm Includes: Control cabinet Electrical control unit Star-delta starter Rubber vibration dampers 2nd row of knives Log spacer (free-cutting hopper) Location: 54634 Bitburg Immediately available

Stav: použitý, Rok výroby: 2023, Demo machine! List price: €33,390 Machine Concept: The Weima high-performance shredder, with its flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving enormous volume reduction especially with bulky input materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. This hopper can be customized to individual requirements and ensures continuous, cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor. The pusher is automatically and load-dependently controlled. The inner pusher guides are made of highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted on universal joints to prevent lateral force on the piston seals. The patented, profiled V-rotor made of solid steel has a diameter of 252 mm and operates at a rotor speed of 80 – 120 rpm. The concave-ground, aggressive, and four-times rotatable cutting knives/cutter crowns are seated in milled knife pockets on special knife holders. This patented system, by reducing the cutting gap between counter knife and rotor for the first time, guarantees high throughput, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors occurs via V-belts to a heavy-duty gearbox mounted on one rotor side at the shaft stub. Standard Equipment: - V-rotor with one row of knives 40 x 40 mm - Vibration-damping machine feet - Hold-down device on the pusher - Horizontal pusher - Control cabinet with 5 m cable, including PLC control and LOGO! text display - Screw screen - WEIMA WAP gearbox - Suction connection Ø160 mm - Straight feed hopper Optional Equipment: - Additional rotor knife row (28 knives) - Anti-blocking hopper (LOGSPACER) Fpodpfevfy Rzex Acxod - 4-sided segmented floor - Quick reverse hydraulics with shock valve Location: