Štvorstranný hoblík

WEINIG UNIMAT 23E na 7 głowic

Rok výroby: 1999, stav: pripravené na použitie (použité), Pracovná šírka: 230mm, pracovná výška: 160mm, počet vretien: 5, priemer vretena: 50mm, výkon vretena: 4x 5,5kW/2x 11kW, posuv: 24m/min, dĺžka podávacieho stola: 3000mm, axiálny zdvih vertikálneho vretena: 80mm, axiálny zdvih horizontálneho vretena: 45mm. Pripojovací výkon: 126kW, potreba vzduchu: 8400-9600m³/h, rozmery stroja (X/Y/Z): cca 3500mm/2000mm/1800mm, hmotnosť: cca 3500kg. Vrátane podávacej jednotky Weinig EM-11 a vhodného rozdeľovača na odsávanie. Dokumentácia je k dispozícii. Možná osobná obhliadka. Hedpju Damdofx An Ijp

Stav: veľmi dobrý (použitý), WEINIG Hydromat H23 Line, S/N 87321, Year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer/moulder with reinforced KASCHWIG 3-sided soundproof enclosure • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronically controlled feed, frequency-regulated, 8 – 80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW Hjdewvqklepfx An Iep • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th spindle universal 11.0 kW (4-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor soft start/brake combinations • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 powered rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with outboard bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 pneumatically pressed • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without cutterheads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components were used: NEW horizontal/vertical spindle NEW outboard bearings All spindles with HL bearing system All motors newly mounted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS in the machine Condition: See attached photos. Technically in top (A1) condition. Infeed mechanization not refurbished – all parts complete and operational Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Errors and prior sale excepted.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Štvorstranná hobľovačka Weinig Profimat 23 Fortec Pracovná šírka: 230 mm Pracovná výška: 140 mm Počet vreten: 6 Usporiadanie vreten: Hjdpfsumxqrex An Isp Spodné - 7,5 kW Pravé Ľavé - 11 kW Horné - 7,5 kW Horné - 5,5 kW Spodné - 5,5 kW Pneumatické prítlaky Posuv s plynulou reguláciou pomocou variátora Pohon cez kardanové hriadele CE certifikát

Stav: použitý, No. 3205 Copy Milling Machine Reichenbacher RMF Used For copying, enlarging, or reducing a model (wood figure). A blank (wood figure) in the desired size is produced from wood. Maximum clamping length: 1000 mm Machine footprint approx. 2500 x 2500 mm (LxW) Sale on behalf of the customer, ex-location near 95485 Warmensteinach, without dismantling, transport, or installation. Dismantling, loading, and transport can be optionally offered by us. Errors in description and price are reserved. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as-is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; basis of sale: “purchased as inspected.” Hsdpfxsv Hdg Ne An Isp Photos and videos are for illustration only and do not represent the actual scope of delivery. Terms of payment: Prices plus statutory VAT. Payment required before collection or shipping. Delivery terms: ex location.

Stav: použitý, číslo stroja/vozidla: 008357, Maximálna šírka panelu: 4400 mm Hodsx A Tk Espfx An Iop Maximálna dĺžka panelu: 4300 mm Maximálny výsuv hlavného pílového kotúča: 75 mm Počet upínacích čeľustí: 9

Rok výroby: 2007, stav: pripravené na použitie (použité), Barberan machine from 2007. This Barberan PUR-33-L is a continuous profile wrapping line designed for applying PVC foil, CPL, paper, and veneer onto various substrates using hotmelt technology. It features a robust, one-piece, electro-welded steel frame, motorized, rubber-coated feed wheels, and a slot-die extrusion system for precise adhesive application. If you are looking for high-quality wrapping capabilities, consider the Barberan PUR-33-L machine, which we offer for sale. Contact us for further details. • Base frame: One-piece, electro-welded steel frame with high structural rigidity. Designed to absorb vibrations and maintain alignment of the pressure rollers. • Conveying system: Motorized, rubber-coated conveyor wheels with inverter-controlled speed, ensuring precise synchronization between adhesive application and profile feed. • Press/calender section: Universal supports and multiple pressure rollers with different shapes and hardness levels, suitable for complex profile geometries. • System type: Slot-die extrusion system with adjustable lips. • Working width: 330 mm. • Gluing accuracy: Constant grams-per-square-meter distribution, independent of line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material wastage. • Adjustment: Micrometric lip adjustment for precise control of adhesive film thickness. • Type: 20-kg PUR drum melter with heated plate, where only the uppermost layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing system: Airtight design with special seals to prevent ingress of air/moisture. • Pump: Integrated gear pump for a constant, pulsation-free adhesive flow to the applicator head. • Function: Maintains the adhesive working temperature during transfer from the melter to the slot-die head at approx. 120–150 °C. Hedpfx Aoym U Disn Ijp • Length: 4.5 meters. • Technical features: Internal core made of PTFE (Teflon), high-pressure and PUR-resistant. Includes a uniform electric heating element to avoid cold spots, high-efficiency thermal insulation, integrated thermocouple, and temperature control via the machine PLC.

Stav: pripravené na použitie (použité), Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Moulding and Planing Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool diameter: 125–180 mm Rebating device incl. tool Hardened table insert in front of first bottom spindle 2nd spindle right 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Hedpfx Anjxz Hh Uj Isp Speed: 8,000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. side roller pressure, spring-loaded 4th spindle right 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle top 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool diameters: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe in front of top spindle, adjustable to tool diameter and can be swung away from the tool, spring-loaded. 6th spindle bottom 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm Spindles – General ----- All profile spindles with high concentric precision. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed, infinitely variable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled (up/down) Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment range of feed rollers against left spindle: 35 mm Machine electrics ----- Operating voltage: 440 V (range 380–420 V), 50 Hz Machine frame, tables, and fences ----- Planer table 2.0 m long (incl. jointing fence) Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted at outfeed table) Two driven, hardened rollers in machine table Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS system, automatic two-axis positioning for spindles 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central location of lubrication points on machine front side Electronic digital readouts at spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily accessible …

Stav: použitý, Rok výroby: 2004, Hoblovací a profilovací automat Weinig Powermat 2000 PowerLock - Technická data Pracovní šířka: 30 - 300 mm Pracovní výška: 19 - 200 mm První spodní držák nástroje Motor s brzdou: 18,5 kW Otáčky: 8000 ot/min Oběžný kruh nástroje: 125 - 180 mm 2. držák nástroje První pravý držák nástroje Motor s brzdou: 15 kW Oběžný kruh nástroje: 93 - 200 mm 3. držák nástroje První levý držák nástroje Motor s brzdou: 15 kW Oběžný kruh nástroje: 93 - 200 mm Hedpsunbrbjfx An Iep 4. držák nástroje První horní držák nástroje Motor s brzdou: 37 kW Oběžný kruh nástroje: 93 - 200 mm 5. držák nástroje Druhý spodní držák nástroje Motor s brzdou: 22 kW PowerLock držák nástroje Otáčky: 8000 ot/min Oběžný kruh nástroje: 93 - 225 mm Podávací systém Frekvenčně řízený podávací systém, plynule nastavitelný: 6 - 36 m/min.

Stav: pripravené na použitie (použité), Špecifikácie Weima WLK 12 Výkon motora: 100 k (75 kW) Vstupný otvor (podávací): približne 1 920 mm × 1 800 mm (6,2′ × 5,9′) Priemer rotora: ~368 mm (14,4″) Šírka / dĺžka rotora: ~1 200 mm (47,2″) Hedpfxsw U Txuj An Isp

Stav: veľmi dobrý (použitý), Štvorspindlová hobľovačka Weinig H30N Pracovná šírka: 300 mm Pracovná výška: 200 mm Počet vreten: 5 Konfigurácia vreten: Spodné: 11 kW Pravé: 11 kW Hjdpfx Aoumtlqjn Ijp Ľavé: 11 kW (možnosť nastavenia uhla vretena až do 90°) Pravé: 7,5 kW (možnosť nastavenia uhla vretena až do 45°) Horné: 11 kW Posuv – plynulá regulácia pomocou variátora do 22 m/min Motor posuvu: 9 kW Pohon pracovného stola: – 3 rady drážkovaných podávacích valčekov pred prvou hlavou – 5 radov hladkých podávacích valčekov Horný podávač: – 9 radov podávacích valčekov Hmotnosť stroja: 6100 kg Rozmery stroja (DxŠxV): 470 x 190 x 160 cm