Brúska na kľukové hriadele, leštiaca lavica

Weipert Schleifmaschine

Stav: nový, Rok výroby: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Slot length: 180 mm Bjdegq Un Aepfx Acyedf Height adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Rok výroby: 2019, stav: takmer ako nový (použitý), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Condition: As new, hardly used - Documentation available (both electronic and hard copy) - Includes pallet with spare parts TECHNICAL DATA Model: RWO 360/400-1150 Maximum chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C after thermal stabilization Control voltage: 230 VAC / 24 VDC Bdodeiryyaepfx Acyjf Furnace working area: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean & dry oven): < 5 * 10-5 mbar Installation footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume responsibility for the correctness, completeness, or timeliness of the above information.

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third Bdsdpfx Acjk Af Svjyjf - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Bdsdpfx Acjl Sl Izsysf Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: použitý, Fette Tangential závitovací hlava T42, příčná Pro více informací a fotografie nás prosím kontaktujte na nebo Bdedpfx Aoft Tk Hjcyjf *

Stav: použitý, typ prevodu: iný, najazdené kilometre: 1 001 km, kabína vodiča: iný, Miesto vozidla: Bovenden, K dispozícii je cca 1 000 pneumatík, nové zo skladových zásob alebo použité, v rôznych veľkostiach od 17,5 do 24 palcov! Ceny za kus sa pohybujú medzi 50,00 EUR a 400,00 EUR bez DPH v závislosti od veľkosti, stavu a odobraného množstva! Na požiadanie máme k dispozícii aj zodpovedajúce disky, viď -8724-! Informácie o príslušenstve sú bez záruky, zmeny, predaj a omyly vyhradené! Bjdpfxoi Rlhvs Acyjdf

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Použitý CNC vysekávací lis Trumpf Trumatic 200r na predaj: Bdjdpjvq N Ndofx Acyof Značka: TRUMPF Model: TRUMATIC 200 Rok výroby: 2000 Typ: CNC vysekávací lis Ovládanie: Bosch CC 220 Lisovacia sila (t): 16,5 Posuvná rýchlosť os X (mm): 80 m/min Posuvná rýchlosť os Y (mm): 55 m/min Súčasná polohovacia rýchlosť (X+Y mm/min): 97 m/min Max. hrúbka plechu (mm): 6,4 Čas výmeny nástroja (s): 1,5-6,5 Počet nástrojových pozícií: 15 Max. priemer otvorov (mm): 76,2 Max. hmotnosť obrobku (kg): 150 Max. počet úderov (1/min): 420 Obrázky vzoriek dierovania: hliník 6 mm

Rok výroby: 1964, stav: použitý, -WKG 429- Bjdpfsg Nt Dbjx Acyjdf Offered here is a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100 mm Grinding wheel Ø (roughing head): 475/254 mm Grinding wheel Ø (finishing head): 457/357 mm Weight: 8 t Grinding method: Segment grinding Segment grinding heads: 2 units Accessories: - Dressing device - Water tank with paper band filter - Marposs control system

Stav: použitý, Rok výroby: 2005, 1 used, very well-maintained crankshaft milling attachment, suitable for mounting e.g. on a lathe for milling crankshafts or for other milling operations Brand: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical Data: Spindle taper ISO 50, concentricity / test arbor L=300 mm = 0.01 mm Speed range, stepless currently set to 2,000 rpm Spindle is designed for up to 3,000 rpm Drive power currently 15 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm The two bolted adapter plates beneath the milling spindle are each attached with bolts. You can use these plates for your lathe, modify them, or you may need to fabricate new ones. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling Spindle: • The milling spindle is mounted on the cross slide of your lathe • Stepless speed adjustment, frequency inverter by LENZE, rated up to 30 kW • Forward / reverse rotation • Lifetime-lubricated spindle bearings • Robust design with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via a leadscrew • Mobile trolley with control panel • Emergency stop • Lockable main switch Driver gearbox for the main spindle: • A long drive bar is installed in the spindle bore and connected to the gearbox • Stepless speed adjustment, frequency inverter by LENZE • Forward / reverse rotation • Jog mode fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of delivery! Bdedpfoddziyox Acysf Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Dowel hole drilling and inserting machine SCHEER BS 5102-V The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling and exact insertion of wooden dowels. Ideally suited for industrial woodworking—particularly in furniture and carcass manufacturing. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully functional Warranty: 12 months CE-compliant / Dust-tested Main Technical Data & Equipment: Workpiece width: min. 60 mm / max. 1,200 mm (oscillating mode: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of support: 7.5 – 50 mm Min. drilling distance, lateral: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Type A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral feeder, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction air volume: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), inclined clamping Power connection: 400 V, 50 Hz Machine Structure & User Convenience: Controlled X-axis with machine base as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping gantry with 4 adjustable clamping cylinders—actuable in 2 groups Stop rulers: left, right, and center of the table Drilling depth and dowel protrusion adjustable directly on the support Cutting waste system & Protection Features: Protective hood locking Louvered safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC control Operator interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color screen Individual workpiece programs for left & right control panel (mirrored possible) Bdodpfsunvg Tsx Acyof Glue quantity definable for each program Network-capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for face-side drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Drilling stroke: max. 25 mm Depth limitation: via spindle & SIKO display Drill distance from reference edge: 5 – 35 mm Holder: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—therefore, you receive a 7-year warranty on the machine construction, especially on the supporting frame and guide mechanics. This excludes electrical supply parts and standard wear parts. Additionally, we provide a 1-year warranty on the complete machine (incl. control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient in continuous operation. 📞 Contact us for a customized quote or to schedule a demonstration. Machine available from stock. Delivery, commissioning, and training available as options.