Súradnicový merací stroj

Wenzel LH 108

Rok výroby: 2000, stav: použitý, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Space requirement approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously maintained and calibrated by the manufacturer Y-axis as longitudinally traversing measuring portal: 1,600 mm X-axis as cross measuring slide: 1,000 mm Z-axis as vertical measuring quill approx.: 800 mm Max. workpiece weight/table load approx.: 2,250 kg Clearance under measuring portal approx.: 900/1000 mm Overall table size approx.: 2,600 x 1,250 mm Table height above floor approx.: 700 mm Table plate thickness: 380 mm Machine height approx.: 3,100 mm Weight approx.: 5,500 kg Special equipment/accessories: Isdpfx Aijt Hw Nyjdoba • Measuring table, crossbeam and quill made of dark natural granite, table with 6 x 9 threaded holes for fixing workpieces/fixtures • All axes are air bearing and therefore easy-moving and virtually wear-free, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC control unit type WPC 2040 / FW 31.351 installed in the workstation (control replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with probe model PH 10 M plus and probe TP 20 as well as various probe accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also installed in the workstation • Automatic probe change possible, 6-position probe rack model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual movement of all 3 axes with continuously adjustable travel speeds • Certified balls for setup on the table, workstation, various clamping devices, etc. Condition: Very good – basically in stock under power for inspection, ready for demonstration, was dismantled by a coordinate measuring machine specialist at the previous owner and reassembled here. Delivery: Ex stock – in the condition as seen and inspected Payment: strictly net – upon receipt of invoice.

Stav: použitý, Rok výroby: 2000, Table length: 1160 mm Table width: 710 mm Clearance: 650 mm Control system: WENZEL ME 5007 Total power requirement: kW Machine weight: approx. 800 kg Space requirement: approx. m WENZEL CNC-controlled vertical 3D coordinate measuring machine Model: LH 54 CNC, Year of manufacture: 2000 Continuously maintained and calibrated by the manufacturer ___ Y-axis as longitudinally movable measuring gantry: 600 mm X-axis as cross-moving measuring head carriage: 500 mm Z-axis as vertical measuring spindle: approx. 400 mm Max. workpiece weight / table load: approx. 200 kg Clearance under measuring gantry: approx. 650 mm Usable table size (total): approx. 1,160 x 710 x 160 mm Table height above floor: approx. 850 mm Machine height: approx. 2,300 mm Weight: approx. 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, traverse, and spindle made of dark natural hardstone; table equipped with 3 x 4 threaded holes for securing workpieces/fixtures • All axes are air-bearing, ensuring smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC control type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel featuring 2 joysticks, enabling access to all software functions; ideally equipped for: • WENZEL measuring software type METROLOG – II Level 2 for measurement of regular geometries, 3D graphical visualization of workpieces, graphic reporting, etc., including keyboard • RENISHAW control unit model PHC 10–2 compatible with • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) model PH 10 T with 5-way touch trigger probe system model TP 200 with various probe accessories, including RENISHAW probe interface PI 200 • Automatic probe change possible, 6-position probe magazine model SCR 200 mounted on the table • Calibration sphere for mounting on the table, work table with console, various clamping devices • Various cassettes and several CDs with assorted software; separate PC for measuring software and printer Isdpfx Aijt Hw S Ijdeba Condition: Very good – can be inspected under power in stock, ready for demonstration; professionally disassembled by a coordinate measuring machine specialist at the previous owner's site and reassembled here. Delivery: Ex-stock – as-is, as-inspected Payment: strictly net – upon receipt of invoice.

Stav: použitý, Rok výroby: 2019, Funkcionalita: plne funkčný, číslo stroja/vozidla: 199102, WENZEL LH 108 CNC Coordinate Measuring Machine Manufacturer: WENZEL Model: LH 108 Design: CNC 3D coordinate measuring machine (bridge construction) For sale is a precise and high-performance WENZEL LH 108 coordinate measuring machine. This machine is ideally suited for quality assurance, production metrology, as well as demanding measurement tasks in tool and mold making. The LH 108 impresses with its robust granite construction, air-bearing axes, and high measurement accuracy. Thanks to CNC control, both single and serial measurements can be conducted efficiently. Technical Data Measuring range: approx. X 1000 / Y 1600 / Z 800 mm Max. workpiece weight: up to approx. 2000 kg High measurement accuracy in the micron range Equipment Ibodpfx Aioy Tnyfedsa Air bearings on all axes Granite guides for maximum stability Modern CNC control with joystick operation Various probing systems (depending on configuration) Temperature compensation (model-dependent) Areas of Application Quality assurance and incoming goods inspection Serial and single part measurement Freeform surfaces and complex components Reverse engineering Other Information Machine in used condition. Inspection by appointment possible.

Stav: veľmi dobrý (použitý), Rok výroby: 2001, Automatický merací stroj Wenzel Lh 108 Merací rozsah: 1000x1600x800 Meracia hlava: Renishaw Ph10M Ibodpfx Asipq I Isidja Senzor: TP20 Výmenník dotykových sond: -- Ovládač: Wenzel WPC 2030 (Pantec Eagle) Softvér: CMM Manager Lite 2025 Rok výroby: 2001 Záruka: podľa dohody Popis: stroj je plne funkčný a vo výbornom estetickom stave; Pneumatická inštalácia kompletne zrekonštruovaná;

Stav: dobrý (použitý), Rok výroby: 1993, Rovinná brúska ELB Rok výroby: 1993 Rozmery magnetického stola: 1500x550 mm S automatickým posuvom v zvislom smere Ibsdpfsygtiwsx Aidsa S orovnávacím zariadením na brúsny kotúč Nádrž na chladiacu kvapalinu s papierovým pásom Veľa brúsnych kotúčov

Stav: generálne opravený (použitý), Rok výroby: 2019, Funkcionalita: plne funkčný, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhauled in 2022 C-frame construction, fixed table with lowering tank Travels (X/Y/Z): 600 x 400 x 500 mm Table to quill distance: 200–700 mm Max. workpiece size (L x W x H): 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Ibjdpfx Ajwh Sigoidja Integrated C-axis for rotation, indexing, and EDM operations (U = 0–100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 80 Amperes Best achievable surface finish: Ra 0.08 µm Operator interface: AC FORM HMI 15" LCD color display, mouse or touchscreen, lift keyboard, and manual control unit Including 3R-Systems Workpartner WPT1+ – 150 electrode positions – 10 pallet positions Net weight of the system: 5,504 kg Machine dimensions: 1790 x 2860 x 3100 mm The machine is cleaned, serviced, and tested by us after receipt of order. Optional: – Commissioning and operator training – Transport and installation – Chiller unit – Dielectric fluid

Stav: použitý, Rok výroby: 2010, Technické detaily: pohyb v osi X: 500 mm pohyb v osi Y: 450 mm pohyb v osi Z: 400 mm rýchlosť otáčania: 20 – 10 000 ot./min riadenie: HEIDENHAIN iTNC 530 systém na výmenu nástrojov: 30 pozícií upínanie nástrojov: SK 40 rýchly posuv: 24 m/min vreteno: 13 / 9 kW otočný a naklápací stôl: 630 x 500 mm celkový príkon: 26 kVA hmotnosť stroja, približne: 4,5 t potrebný priestor, približne: 3,1 x 2,4 x 2,6 m 5-osové simultánne obrábacie centrum, NC otočný a naklápací stôl, schopnosť simultánneho pohybu v osi B -5 / +110°, C 360°, priame systém merania dráhy, elektrické ovládacie koliesko, oplachovacia pištoľ, odstraňovač triesok, 3D IR sonda TS 649, Ibodozp Nfropfx Aidsa BA 4, laserové meranie nástrojov, približne 95 000 prevádzkových hodín, približne 11 500 hodín prevádzky vretena.

Stav: dobrý (použitý), Rok výroby: 2009, Priemer kolesa - max. 1200 mm Šírka kolesa 260 mm Modul - max. 16 Modul - min. 0,5 Ibsdpswzmpzjfx Aidea Zdvih 270 mm Vzdialenosť vreteno/stôl 920 mm Držiak rezača ozubených kolies SK Ovládanie Bosch MTX Priemer stola 900 mm Maximálny priemer obrobku pri vnútornom ozubení 1200 mm Počet zdvihov - plynulo 50-1000 zdvihov/min Priemer vretena 125 mm Otvor stola 320 mm Vzdialenosť osí Min/Max 0-820 Pohon rezná hlava 30 kW Celkový príkon 72 kVA Hmotnosť stroja cca 24 t Potrebný priestor cca 6,5x2,9x4 m M8160132

Stav: veľmi dobrý (použitý), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4012M-4212, merací rozsah os X: 900 mm, merací rozsah osi Y: 1 000 mm, merací rozsah osi Z: 600 mm, hmotnosť obrobku (max.): 1 200 kg, Výbava: Dostupný typový štítok, Technické údaje: Typ stroja: Mitutoyo STRATO 9106 FAL-A910 Rok výroby: 2001 Merací rozsah: 900 x 1000 x 600 mm Isdpfx Asqz T H Aoidsba Softvér: Mitutoyo Software v2.4.R11 Príslušenstvo: Držiak sondy: Renishaw SP80 Sonda: Renishaw SP80 Ďalšie príslušenstvo: kalibračná keramická guľa, rôzne sondovacie gule a predĺženia, Renishaw menič, upínacia sada s 4 x SCP80 a držiak sond Zmeny a chyby v technických údajoch a špecifikáciách, ako aj medzičasný predaj, vyhradené!

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Použitý CNC stroj na brúsenie ozubených kolies OERLIKON Opal 800 Ibsdpfeyucd Hex Aidja Maximálny hlavový priemer: 1000 mm Minimálny pätný priemer: 40 mm Minimálny modul: 1 Maximálny modul: 16 Počet zubov: 999 Maximálna šírka ozubeného kolesa: 630 mm Obrusný kotúč Opal a diamantový kotúč Možné len brúsenie jedného profilu, pozri foto.