Kombinovaná kotúčová píla a frézka

WINTER KSF-315-2600

Stav: ako nová (výstavný stroj), Rok výroby: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, residual dust content less than 0.1 mg/m³. High extraction capacity with minimal space requirements. Maximum performance in this class. Very quiet operation. Application Area Clean air extraction systems for wood chips and wood dust Designed for commercial operation Suitable for all woodworking machines with corresponding extraction nozzle diameter Can be used for multiple dust sources High-quality, well-thought-out construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be easily switched from left to right, for flexible use Large maintenance openings Godpfx Adjcnw U Dsrobh Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for immediate use Mobile Description of the Filter Ultra-compact with maximum filter surface Filter material made of polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic design, certified and approved to M-BIA category Filter resistance monitoring via differential pressure switch, adjustable, with warning light on control box The fan is installed downstream of the filter Features: With newly developed locking device for secure positioning of the container All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of Delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-configured for connection of machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure attenuator available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow: 1095 m³/h Max. air flow: Vacuum at nominal flow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of suction nozzle to floor: 850 mm Weight: 194 kg Location: Coming into stock at 54634 Bitburg

Stav: použitý, Rok výroby: 1981, Vzdialenosť medzi hrotmi: 1300 mm Kopírovacia dĺžka: 1250 mm Výška hrotu stroja: 250 mm Výška hrotu nad suportom: 160 mm Posuvová rýchlosť saní: 3 m/min Hmotnosť: 630 kg Otáčky: 500-1000-1500-3000-2100-4200 ot./min Hydraulické Skladové miesto: Nattheim Gjdpfx Adjvvkt Ijrjbh

Stav: použitý, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tonnes, maximum specific pressing pressure 2 kg/cm² Heating 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction system for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine on chassis Installation footprint according to manufacturer 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Gbedpfx Adexl Ha Sereh Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture and delivery scope according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as seen. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Stav: nový, Rok výroby: 2022, prevádzkové hodiny: 1 h, číslo stroja/vozidla: 268955558, GREMAC e1 trommel screening plant Tandem chassis / axles 2x kg (permissible total weight) kg unladen weight without power unit Overrun brake Vehicle lighting according to StVZO TÜV approval Drum Length: mm Diameter: mm 4.0 kW electric drive Speed adjustable via frequency inverter Lifting screw Adjustable cleaning brush Hopper with conveyor belt Rubber belt with chevron profile 0.75 kW electric drive Speed adjustable via frequency inverter Fine grain collection belt Movable suspension Smooth rubber belt 1.5 kW electric drive Speed adjustable via frequency inverter Fine grain conveyor belt Movable suspension Rubber belt with chevron profile 2.2 kW electric drive Speed adjustable via frequency inverter 25° inclination angle Manual cable winch for angle adjustment Oversize stockpile conveyor Movable suspension Rubber belt with chevron profile 1.5 kW electric drive Speed adjustable via frequency inverter 25° inclination angle Manual cable winch for angle adjustment Control system Siemens Logo PLC Control panel with buttons and potentiometers 400V power circuit Gsdpjl Hbcfsfx Adrjbh 24V control circuit Main switch Ceekon 16A socket Emergency stop relay Without generator Cladding Frame components hot-dip galvanized Drum painted Covers powder-coated in RAL7005 and 5018 Further information Intended use: construction industry, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery terms: EXW,

Stav: pripravené na použitie (použité), Rok výroby: 1974, Funkcionalita: plne funkčný, číslo stroja/vozidla: 74-4-10, Formátová cirkulárna píla ALTENDORF F90, rok výroby 1974 Výrobné číslo: 74-4-10 Výrobca: Altendorf Nemecko Dĺžka rezu mm: 2600 Šírka rezu mm: 1 300 mm Gbsdpfxeipvrbs Adreh Max. výška rezu mm: 130 Max. priemer pílového kotúča: 400 mm Hlavný motor: 5,5 kW S predrezávačom 4 stupne rýchlosti Nastavenie výšky pílového kotúča: manuálne Hmotnosť cca kg: 780 Technické údaje bez záruky

Stav: nový, Rok výroby: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table in anodized aluminium Robust steel and cast iron frame Large support area and precise cast table High-precision format sliding table in anodized aluminium (travel distance 2,250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence, extendable up to 2,660 mm, with professional flip stops Max. saw blade Ø 315 mm with scorer, tiltable from 90°–45° Rip fence with fine adjustment Robust saw unit and large double trunnion spindle moulder assembly for ultimate stability, precision, smooth running, and extended service life Gedohp Rdlspfx Adrjbh Solid and precise machine table in stress-relieved cast iron Three spindle speeds, manually adjustable, from 3,500–10,000 rpm Spindle with reverse rotation Standard curved milling guard Aluminium safety flip stop jaws Two high-capacity motors Two plug-in handwheels for convenient, quick operation Dimensions & weights Weight approx. 470 kg Dust extraction Extraction port diameter: 2 x 120 mm Extraction port diameter for saw blade guard: 60 mm Electrical specification Motor power: 2 x 5.0 kW Voltage: 400 V Frequency: 50 Hz Spindle moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3,500 / 7,000 / 10,000 rpm Max. cutter diameter: fixed: 210 mm retractable: 180 mm Tenoning: 275 mm Panel saw unit Crosscut length: 1,600 mm Cutting width with rip fence: 900 mm Max. crosscut width, left of blade: 2,660 mm Saw blade tilt: 90–45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm Note: Saw blade diameter independent of scorer (Main) saw blade speed: 4,000 rpm Sliding table and work table Table length: 1,112 mm Table width: 430 mm Scope of delivery: Curved milling guard Anodized aluminium sliding table Aluminium stop jaws Flip stops Location: ex-stock 54634 Bitburg - Available immediately -

Stav: dobrý (použitý), Rok výroby: 1990, šírka rezania (max.): 1 000 mm, rezacia výška (max.): 140 mm, dĺžka stola: 1 400 mm, výkon: 5,5 kW (7,48 k), Typy: F 45, číslo stroja: 90-8-86 Godpfx Adstxh Nierobh

Stav: ako nová (výstavný stroj), EXPOZIČNÝ STROJ Godpfxjviu S Uj Adrsbh Na predaj je takmer nový hobľovací a zrovnávací stroj Record Power PT310 s hobľovacou šírkou 310 mm. Stroj je v pôvodnom stave, takže máte plnú záruku. Technické údaje: - Výkon motora: 3 HP / 230 V pripojenie - Dĺžka zrovnávacieho stola: 1 407 mm - Hobľovacia šírka: 310 mm - Priemer vretena: 70 mm - Vreteno je osadené tromi hobľovacími nožmi - Maximálny záber: 3 mm - Rýchlosť posuvu: 7 m/min - Hmotnosť: 202 kg Preprava: Rakúsko: 80,00 € vrátane DPH Nemecko: 100,00 € vrátane DPH Južné Tirolsko: 120,00 € vrátane DPH Hobľovací stroj sa nachádza v A-5431 Kuchl a je možné ho kedykoľvek počas našich otváracích hodín prezrieť. Medzipredaj vyhradený! Príbuzné pojmy: zrovnávací stroj, hrúbkovacia fréza, hobľovačka, zrovnávačka, hrúbkovacia fréza Referenčné číslo: ZXPT310-A

Stav: veľmi dobrý (použitý), Pásová brúska LANGZAUNER Typ LZG Rozmer brúsneho stola cca: 2500 x 800 mm Rozmer brúsneho pásu cca: 6800 x 150 mm Výkon motora cca: 3,0 kW, 400 V, 50 Hz Motorový istič Gbodpfx Ajuxnyuodrjh Manuálne nastavovanie výšky stola Pravý/ľavý chod brúsneho pásu Horný kryt brúsneho pásu Svetelný panel pre pracovnú oblasť CE vrátane špeciálnej brúsnej topánky vrátane odsávacieho ventilátora NOVÁ GRAFITOVÁ TKANINA Poznámka k použitým strojom: • Technické údaje sú uvádzané s výhradou omylov a medzi-predajov. • Uvedené ceny platia ako ceny pri odbere zo skladu – voľne naložené! • Stroje boli vyčistené a odskúšané na funkčnosť. • Všetky stroje sa nakupujú tak, ako boli obhliadnuté, bez akýchkoľvek nárokov na záruku. Kupujúci má možnosť stroje osobne prezrieť na mieste. • Zvláštne dohody sú možné len v písomnej forme. (Žiadosti zodpovedáme len pri uvedení Vašej adresy a telefónneho čísla!)

Stav: nový, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast-iron construction - Equipped with a fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward and reverse rotation - Large cast-iron milling unit, mounted directly to the table - Extraction hood under the worktable for improved dust extraction - Solid and precise cast-iron table - Fast and easy speed change - Powerful 5.0 kW motor - Standard fitted with curved guard hood - Quality Made in Italy Equipment Details Cast-Iron Milling Unit - Directly mounted to the milling table - Spindle is mounted high up with precision ball bearings, ensuring minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Equipped with a powerful three-phase motor Cutter Guard The standard cutter guard is equipped for maximum safety with an adjustable guide rail and protective plate as standard. Fencing - Precise fence with quick adjustment and fine adjustment with scale on the fence jaw - Integrated extraction port provides a clear view Table Opening - Large table opening allows for the use of larger raised panel cutters and tenoning as well as mortising tools above and below the table Curved Guard Hood - Standard equipment included Reversible Fence Jaws - Versatilely integrable fence for bridging the tool gap - Enables safe work even with narrow workpieces Accessories HOLZKRAFT Safety System Fence Jaws, adjustable - Optimum protection on every spindle moulder, individually adjustable to the specific task - Universal base elements for mounting AIGNER safety and working devices - Quick setting by simultaneous clamping of all individually movable rods - Made from high-quality aluminium - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No.: 5851000 - 650 mm: Art. No.: 5851650 TECHNICAL DATA Dimensions and Weights Weight (net): approx. 240kg Extraction Connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1000mm Worktable width: 575mm Table height: 900mm Setup Information Required space length: 1945mm Required space width/depth: 920mm Required space explanation: Dimensions take into account maximum travel or usable lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Gedpfxjkyt Ulj Adrsbh Working area width/depth: 1600mm Explanation working area: Please add the specified values to the required space to obtain the recommended free setup area for the machine. Electrical Data Connection voltage: 400V Mains frequency: 50Hz Drive motor power: 5.0kW Spindle Usable spindle length: 100mm Max. spindle projection above the table: 130mm Spindle speed(s): 3500/7000/10000 rpm Spindle diameter: 30mm Max. Cutter Diameter Max. tool diameter retractable: 180mm Max. profiling cutter diameter: 210mm SCOPE OF DELIVERY - Curved guard hood - Aluminium fence jaws Holzkraft specialist dealer – Accessories available on request!