Skladové valčekové dráhy

WTT Fördertechnik 121

Stav: veľmi dobrý (použitý), Conveyor Roller Tracks for the Furniture Industry WTT Fördertechnik GmbH – Type 121 750 pcs. complete roller tracks, each 3 m long Total length – 2300 linear meters Pricing: 1 pc. = €80 (total length 3 m) 5 pcs. = €300 (total length 15 m) 10 pcs. = €500 (total length 30 m) Special pricing for larger quantities on request. Detailed specification: Roller conveyor length L = 3000 mm Installation length EL = 500 mm Roll pitch T = 200 mm Lasdpfx Aswwmitjfzji Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 pc. per running meter Comprises: 1. Side members, each 3000 mm long, made from profile 20/80/40/3 mm, with a 25 mm hole pattern, perforated to suit 12 mm diameter shafts, powder coated in RAL 6011 green. 2. Insertable carrying rollers Series: 4.5.80.1.12.1.5.00 Steel tube – 80 x 2.0 mm wall thickness, Shaft – 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Roller surface unfinished steel. Installation length EL = 500 mm 3. Bolt-on bridge support feet, sturdy welded construction made of special profile with crossbeam, height adjustable via M16 threaded spindle with slotted screw +/- 25 mm. Equipped with base plates and dowel holes. Powder coated in RAL 3000 red Weight – 2.5 kg. (Specifications and data are subject to change and error. Prior sale reserved.)

Stav: použitý, Holz Her Accura 1556 Premium Heavy-duty design with full equipment Edge thickness: 0.4 - 20 mm 18.5" touchscreen control, 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-adjustable infeed fence Pre-milling unit positioned before the gluing station, with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices Gluing station GLU-JET automatic. Cartridge + PUR bonding. Thin film technology Glue height adjustment / touch nozzle Max. edge height: 60 mm Pressing unit with 4 rollers, motor-pneumatic operation. NC servo axis End trimming unit for coil and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment for 0-10° miter cut on end-trimming saws Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunctional milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius trimming R1, 3; R2 (2x) Bevel trimming up to 45° Lsdpjxnmu Iefx Afzeai Copying milling unit MOT4 with automatic tool changer MOT2 and oscillating feeler, for corner copying, postforming corners, with 4 NC control axes for machining the upper and lower longitudinal edge and copying the front and rear vertical edge. Working height 60 mm. R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1,3; R2 (2x); bevel 45° Nesting package Flat scraper unit with pre- and post-tracing Application-controlled oscillating buffing unit for finishing and edge polishing, with 2 textile disks Spraying device in infeed and outfeed zones; anti-static agent at the pressing unit Infeed area: electronically controlled separating agent spraying device Pressing unit: electronically controlled anti-static spraying device Outfeed area: electronically controlled cleaning fluid spraying device with detergent Automatic chain lubrication Barcode scanner Machine is FACTORY SERVICED, in TOP CONDITION Year of manufacture: 2021 / Leasing available Machine is connected in the showroom and ready for demonstration Ex stock Lieboch

Stav: veľmi dobrý (použitý), Jednostranná olepovačka hrán (ĽAVÁ) Hrúbka hrany v rolkách (min/max) mm 0,3 - 3 Hrúbka hrany v lištách / pásoch (min/max) mm 3 - 12 Hrúbka dosky (min/max) mm 8 - 60 Ovládanie: ICOS open TS Posuvná rýchlosť m/min (plynule nastaviteľná) 4 - 20 Horný prítlak poháňaný klinovým remeňom Sprejovacie zariadenie (na kvapalné antiadhézne prostriedky) Predfrézovacie zariadenie 08.376 (2 x 3 kW) Lepiaca jednotka (horúci tavný lepidlo) 283.1513 Tlaková zóna na hrany Ljdpfxod Nuu Hs Afzjai Zásobník na hrany v rolkách (počet komôr) 1 Kapovacie zariadenie 08.415 (2 x 0,66 kW) Frézovacie zariadenie 08.055 (2 x 1 kW) 0°-30° Multifunkčné zariadenie (frézovanie polomeru a tvarové frézovanie) 08.342 (2 x 0,66 kW) servo Profilové stieracie nože 08.519 Ploché stieracie nože 08.50 Leštiace zariadenie 08.612 (2 x 0,25 kW)

Stav: veľmi dobrý (použitý), Rok výroby: 2019, prevádzkové hodiny: 278 h, Maximálna veľkosť obrobku na frézovanie X = 3620 mm; Maximálne pojazdové dráhy: X = 3865 mm; Minimálna výška miestnosti 3,20 m; Obrábanie v osiach Y a Z; Y = 1600 mm; Maximálna šírka platne 2000 mm; Maximálna výška obrobku 300 mm (merané od hornej hrany vákuového prísavky 125 mm) OVLÁDANIE STROJA / SOFTVÉR CAMPUS V7 Plus CAD/CAM softvér – 1x licencia vrátane CabinetControl Base a simulácie úberu materiálu; 1 ks softvérová licencia zabezpečená licenčným kľúčom pre stroj; CabinetControl Base – softvér na návrh a výrobu nábytku; CAMPUS V7 PLUS – softvér pre CNC obrábacie centrá DOPLNKOVÝ MODUL – VYSOKORÝCHLOSTNÉ FRÉZOVANIE Riadenie Siemens industry PC riadiaca jednotka Ručný ovládací prístroj na diaľkové ovládanie stroja FRÉZOVACIA HLAVA 5-osá hlava 7840, výkon: 12 kW, n(max.) = 0-24000 min⁻¹ plynule nastaviteľné; kardánové uloženie; C-os otáčanie +/- 360°, A-os otáčanie +/- 180°; kvapalinové chladenie (chlad. agregát v cene) s úchytom nástroja HSK-F 63; max. hmotnosť nástroja 6 kg; frézovacie nástroje max. Ø 200 mm; kotúčové píly max. Ø 350 mm s voliteľným výmenníkom 7886 Pick-Up VŔTACÍ AGREGÁT Tlakový zosilňovač na zvýšenie štandardného tlaku z 6 na 8 barov; vŕtacia jednotka 7881, 24 vreten; pohon 3,0 kW vrátane pílového agregátu; 18 vertikálnych vreten jednotlivé spúšťateľné, usporiadanie v tvare L: 11+2 v X-smere, 6 v Y-smere, 32 mm rozteč; n(max.) 1000 - 5710 min⁻¹ plynule nastaviteľné; 6 horizontálnych vreten; 2 dvojvret. v X-smere; 1 dvojvret. v Y-smere; vrátane pílového agregátu; integrovaný pílový agregát na pílenie/ drážkovanie v X-smere; n(max.) 1000 - 7330 min⁻¹ plynule nastaviteľné STÔL STROJA Stôl so 6 konzolami, pneumaticky upínané, posuvné v smere X; zobrazenie a nastavenie polohy konzol a prísaviek v programe; 2 bočné dorazy (pole A a D), 2 veľkoplošné tlačidlá na upínanie a uvoľňovanie obrobkov, 2 meracie pásma na konzoly v X (voči dorazu na poli A/D), meracie pásma pre prísavky na každej konzole v Y (voči zadnému dorazu) DORAZY 2 ďalšie pracovné polia vpredu pre 6 konzol (4-polová obrábanie); 4 pneumaticky ovládané dorazy na pole, z toho jeden na konzolu a jeden bočný v smere X POMOCNÉ ZARIADENIA NA NAKLADANIE 4 pneumaticky zdvíhateľné a sklopiteľné podávacie pomôcky na jednoduchú manipuláciu s ťažkými dielmi VÝMENA NÁSTROJOV Nosič nástrojov 7996, 18-miestny karusel (automaticky pojazdný v X), pojazdný zásobník na pílové kotúče 7886, 1 pozícia; špeciálne na veľké priemery kotúčov do 350 mm, Pick-Up systém na pojazde, pneumatický; max. Ø nástroja 350 mm; menič nástrojov 7892, 16-miestny lineárny Pick-Up VÁKUMPUMPA 140 m³/h suchobežná LED osvetlenie pracovného priestoru BEZPEČNOSTNÉ MOŽNOSTI Bezpečnostný kryt podľa CE normy; bočné a zadné bezpečnostné oplotenie Laedsxfaf Uspfx Afzei VYBAVENIE A PRÍSLUŠENSTVO MAZANIE Automatické centrálne mazanie; predĺženie portálu – ideálny na 4-polovú obrábanie a veľké obrobky; 2 ovládané pneumatické moduly pre max. 5 rámových upínačov na pole A/D; na každý modul je možné ovládať max. 5 rámových upínačov súčasne – súčasné otvorenie/zatvorenie pripojených upínačov vrátane nožného pedálu na ovládanie, max. 2 ks na pole A a D VOLITEĽNE: LASER – laserový ukazovateľ, pozostáva z dvoch laserových ukazovateľov na polohovanie vákuových prísaviek.

Stav: použitý, číslo stroja/vozidla: 008018, Typ pripevnenej hrany: tenká hrana, hrubá hrana, masívne drevo Laedswv Dfcepfx Afzei Lepiaci systém: EVA, PUR Frézovanie spojov: áno Multifunkčné agregáty: áno Max. posuvná rýchlosť: 20 m/min Maximálna hrúbka dosky: 60 mm Pracovné agregáty: 7 ks

Stav: použitý, Rok výroby: 2009, HOLZ-HER Edge Banding Machine CONTRIGA 1366 Edge Thickness: 0.4-30 mm (depending on configuration) Edge Height: 51/66 mm (depending on configuration) Panel Thickness: 6-45/60 mm (depending on configuration) Edge Material Types: Edge banding from rolls or strips Feed Rates: Infinitely variable feed from 12-30 m/min (depending on configuration) - Adjustable infeed table in the magazine area (max. adjustment range: 30 mm) - Height-adjustable magazine plate to vary the lower edge overhang - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - With transport chain including automatic central lubrication - Motor-driven, position-controlled bridge height adjustment - Pneumatic stop roller for the shortest possible workpiece sequence Lasdovvkfdspfx Afzji - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically operated sliding covers along the entire machine (variations possible at individual units) - Motorized infeed guide - Injection oiler for all joints and bolts (including operating hour counter) - Central connection for extraction (2x Ø 200 mm) - Integrated chip collection box at end of machine (when radius scraper unit is installed) Control System PPC 231 - Power PC for efficient set-up and changeovers - 15" SVGA touchscreen - 128 MB CF memory card - On-board USB port - Ethernet network port - On-board keyboard port - Windows-like operating interface - All information in plain text and/or graphics - Swivel and tilt control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of units with basic settings for setpoints, reference points, and tool corrections, as well as fixed reference points - Central and clear fine adjustment for set-up processes for units and axis settings (depending on configuration) - Interval display for minimum workpiece distance - Integrated track control - Reference points are generally and program-specifically controlled - Clear and complete acquisition of all operating data - Service notifications in plain text - Diagnostic system - Integrated synchronous bus system for high accuracy in unit control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed areas For the infeed area: Electronically controlled release agent spray device, Release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray device, Cleaning agent Riepe-LP163/93 (only in combination with jointing unit 1961 and flat scraper 1964) Jointing Unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating Plunge depth: 5 mm With static frequency converter 200 Hz Without milling tool With ProLock insert clamp for fast tool change Tooling for 1803 (workpiece height up to 60 mm) 2 diamond cutters PRO UT (front and rear), incl. safety hoods Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-handed, 1x right-handed Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max. 2 mm at 60

Stav: dobrý (použitý), Rok výroby: 2007, Technische Daten: Ljdpfx Afet R T Hcszsai - Maximale bearbeitbare Länge: 3200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Werkstückbreite: 200 mm - Minimale Werkstückbreite: 40 mm - Maximale Werkstückhöhe: 130 mm - Frästiefe bei max. Zapfendurchmesser Ø320 mm: 105 mm - Zapfenwagen-Vorschubgeschwindigkeit min./max.: 0/100 m/min - Profiliergeschwindigkeit min./max.: 3/15 m/min Zapfenschneiden: 1. Ablängsäge 5,5 PS (4 kW) Sägeblatt-Ø 400 mm 2. Zapfenspindel Gegenlager 50 x 620 mm 15 PS (11,3 kW) Max. Werkzeug-Ø 320 mm Achshub 575 mm Automatischer Splitterschutz 3. Zapfenspindel Gegenlager 50 x 620 mm 15 PS (11,3 kW) Max. Werkzeug-Ø 320 mm Achshub 575 mm Automatischer Splitterschutz Vertikale Positionierung mit Durchgangsachse 4. Digitale Winkelspannvorrichtung Profilieren: 5. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Achshub 280 mm Zeitverzögerter Splitterschutz bei Kalibrierung Doppelte Drehrichtung Vertikale und horizontale Positionierung mit Durchgangsachse 6. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Achshub 280 mm Vertikale und horizontale Positionierung mit Durchgangsachse 7. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Vertikale und horizontale Positionierung mit Durchgangsachse 8. Endbearbeitungsgruppe Vertikale und horizontale Positionierung mit Durchgangsachse Vorrichtung zur Flügelentnahme Hfutwt78Z 9. Untere Horizontale Nutwelle Vertikale und horizontale Positionierung mit Durchgangsachse 88,5 PS (66,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: Deilman S, Ponorná vaňa s dĺžkou 6,5 m, šírkou 1,4 m a výškou 1,5 m s nakladacou plošinou 6 m. Ledsudwdwopfx Afzsai V ponuke máme aj ďalšie ponorné vane (12,5 m).

Stav: použitý, Rok výroby: 2022, Used machine Year of manufacture: 2022 Condition: as new With 6 months full warranty! Only 70 operating hours; machine has not yet been used in production! Equipment and technical data: BASE MACHINE Holz-Her Machining Center DYNESTIC 7535 10.5 Lift Ljdpfxowxz Uys Afzsai Machining length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry design traveling column Rack and pinion drive, helical-toothed, in X and Y directions, 1 x ball screw drive in Z direction for precise positioning MATRIX table Fixed, continuous machining table with grid division, continuous T-slots in X and Y directions, slot spacing 50 mm with 25 meters sealing cord for clamping the sacrificial plate 1 machining field with stop rails/stops Height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction on the right (viewed from the front of the machine) Remote maintenance Integrated network card for data transfer of control and program data. Data transmission via high-speed internet connection. Requirement: high-speed internet connection at the machine USB connection For data backup and direct loading of machining programs at the operator panel TECHNICAL DATA Machining dimensions 7535 10.5: Max. surface area on nesting table: X = 3100 mm Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (without sacrificial plate) Max. pusher clearance over the table for Push/Auto/Lift versions: Z = 250 mm from table top (without sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via license dongle for the machine CAMPUS V7 PLUS, software for CNC machining centers: Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM functionalities for creating part variants with macro technology Hi-Speed USB-Device Network Server Allows the use of the CAMPUS single license on the machine or an office PC in the same network. Only one license can be used on the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS, software for CNC machining centers: Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP

Rok výroby: 1985, Stav: dielensky repasované (použité), REFORM typ AR 10 typ 40H Čelná brúska Rok výroby: 1985 Brúsiaci motor: 30 kW Riadenie: Modicon Lasdpfxjd E Np Ej Afzsi Magnetické ovládanie: 6-stupňové Veľkosť magnetu: 1000 mm x 300 mm Priemer segmentovej hlavy: 460 mm Rozmery segmentu: 90 x 38 x 180 mm Počet segmentov: 1 sada = 8 ks Prísun brúsiaceho motora: plynule nastaviteľný 0,01 mm - 0,1 mm Hydraulický výkyvný pohon Nové napájacie káble medzi strojom a rozvádzačom