Vodicí/ťahová vretenová sústruh s priemerom otáčania nad lôžkom 300–399 mm kúpiť použité (230)

Stav: dobrý (použitý), WEILER Praktikant 800R / Engine Lathe with Lead and Feed Screw - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40–2000 rpm - Automatic longitudinal and cross feeds - Thread cutting / Metric / Imperial - Tailstock Morse taper: MK3 - Three-jaw chuck - Multifix quick-change toolpost with inserts - Chuck guard - Chip guard with work light - Chip tray Iedpjwp S Aiofx Aguotn - Change gears - Tool cabinet - Documentation Dimensions: LxWxH: 1.8 x 0.8 x 1.6 meters / Weight: 750 kg Subject to errors and omissions

Stav: dobrý (použitý), Funkcionalita: plne funkčný, used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing diameter over bed: Ø 330 mm Centre height over bed: 165 mm Swing diameter over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor, stages 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Itodpfxsvadqzo Aguon Control voltage: 42 Volt Features & Accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick-change collet chuck and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake, selectable - 2x Emergency stop - Electric chuck key detection (via sleeve with pushbutton) - Coolant tank with pump in machine base - Foldable chuck guard - Splash guard - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very operator-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Subject to prior sale.

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, otvor vretena: 50 mm, Sústruh EMCO EMCOMAT 17D, ex školské použitie, vo veľmi dobrom stave. Špecifikácie: - Rok výroby: 2006 - Priemer sústruženia nad lôžkom: 340 mm - Priemer sústruženia nad priečnym suportom: 190 mm - Vzdialenosť medzi hrotmi: 700 mm - Otáčky: 40-3000 ot./min, variabilné v 4 stupňoch Iodpfx Asu N Dpmogustn - Priemer vŕtania hlavného vretena: 50 mm Príslušenstvo: - 3-čeľusťové skľučovadlo s vnútornými a vonkajšími čeľusťami - 3-osé digitálne odmeriavanie - Elektrická schéma - Multifix držiak nožov s 3 držiakmi - Chladiace zariadenie - Strojové osvetlenie - Otočný hrot - Pozdĺžny doraz lôžka - Strojové nohy

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Colchester Student 2500 3-osé digitálne odmeriavanie Zariadenie na upínacie klieštiny Rôzne príslušenstvo Iedpfx Agjw R S Awjuetn

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 165 mm, šírka v strede: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B sits in terms of size between the Weiler Praktikant and Weiler Commodor, making it a true all-rounder for any workshop. The machine has been extensively partially overhauled in our workshop, ensuring it is in outstanding technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers can be shifted smoothly. You are welcome to inspect the machine on site. Availability: On request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mount: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Speed range: 22–2800 rpm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28mm Spindle brake: Switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop buttons, leadscrew and feed rod cover (optional), operating manual, and more upon request... Our Service Promise to You: - We are a certified master craftsman business in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced beforehand - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or installation for you Itjdpfx Agow N Np Souen

Stav: nový, Zimas D360-1000 – univerzálny sústruh - 3-čeľusťové skľučovadlo - 4-čeľusťové skľučovadlo - pevná luneta - dorzovní luneta - 3-osé digitálne odmeriavanie polohy - Rýchloupínací držiak nástrojov Multifix typ E vrátane 4 nástrojových držiakov - Ochrana proti striekajúcej kvapaline - Olejová vaňa - Osvetlenie pracovného priestoru - Nožná brzda vretena - Chladenie (chladivový systém) - Oceľový podstavec s 3 zásuvkami a skrinkovými dvierkami - Redukčný puzdro - Výmena prevodových kolies Technické údaje - Max. priemer obrobku nad lôžkom: 360 mm Iodpfxeuzhv Uj Aguotn - Max. priemer obrobku nad suportom: 212 mm - Max. priemer obrobku bez mostíka: 490 mm - Vzdialenosť medzi hrotmi: 1000 mm - Šírka lôžka: 187 mm - Priemer otvoru vretena: 51 mm - Metrické závity: 0,2 – 5 mm (28 stupňov) - Palcové závity: 8 – 112 TPI (36 stupňov) - Modulové závity: 0,2 – 3 mm (22 stupňov) - Diametrálny závit: 8 – 112 DP (36 stupňov) - Pozdĺžny posuv: 0,050 – 0,696 mm (36 stupňov) - Priečny posuv: 0,013 – 0,188 mm (36 stupňov) - Upínanie pinoly koníka: MK3 - Výsuv pinoly koníka: 100 mm - Výkon motora: 1,5 kW - Rozmery (ŠxVxH): 1925 x 1510 x 750 mm - Hmotnosť: cca 650 kg

Stav: nový, Centre Lathe & Leadscrew Lathe WEILER COMMODOR 180 GSD - New machine / Demonstration machine / Unused - 3-axis digital readout - CE marking - Centre height: 180 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: Metric / Inch / Diametral - Tailstock quill taper: MT4 - Quill travel: 150 mm - Coolant system - Multifix tool post with insert Iodpfxjwucv Ro Aguetn - 3-jaw chuck 200 mm - Work lamp - Chip guard (rear panel) - Documentation Dimensions: LxWxH 2.4 x 1.4 x 1.7 meters / Weight 1700 kg Errors / input mistakes excepted.

Stav: použitý, Funkcionalita: plne funkčný, Schaublin 150 High-Precision Lathe with 2-Axis DRO ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm Itsdswynluepfx Agusn >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse drive: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centres >> Operating manual About the machine: Offered for sale is a Schaublin 150 high-precision lathe. The machine is operational, features a rapid traverse, and is in good used condition. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Paralelný sústruh BREDA BRF 150 x 800 mm Stroj pochádza z ukončenia školského prevádzky. Výborný stav, pripravený na okamžité použitie. Výška hrotov: 150 mm Vzdialenosť medzi hrotmi: 800 mm Priemer, ktorý je možné obrábať nad suportom: 185 mm Samocentrovací skľučovadlo s 3 čeľusťami: priemer 160 mm Počet otáčok: 47 - 1440 ot./min. Prechod vretienka: 42 mm Rýchloupínacia veža na nástroje v cene Šírka loža: 260 mm Upínanie koníka: Morse kužeľ č. 3 Lunety v cene Ijdpfx Agoif Rrzsujtn Štvordielne skľučovadlo v cene Koník v cene

Stav: použitý, Funkcionalita: plne funkčný, Sústruh EMCO Maximat V13 380 voltov Výrobné číslo: D1E8706022 Katalógové číslo: 99826 Stav: použitý Lokalita: 86928 Hofstetten Cena: 8 900 € bez DPH Iedpfx Agsv H Uklouotn

Stav: nový, Stredová vzdialenosť ----- 1000 mm Stredová výška ----- 180 mm Priemer sústruženia ----- 360 mm Iedpfx Aeq E Iyzsguetn Priechod hlavného vretena ----- 38 mm Šírka lože ----- 203 mm Otáčky vretena ----- 45-1800 ot/min Motor ----- 2.4 kW Hmotnosť ----- 880 kg ZAHRNUTÉ * 3-osý digitálny odpočet značky SINO * Rýchloupínací nožový držiak typu Multifix TOOE5 so 4 posuvnými držiakmi * 3-čeľusťové skľučovadlo 200 mm * 4-čeľusťové skľučovadlo 200 mm * Upínacia doska 250 mm * LED pracovná lampa a chladiaci systém * Pevná a pohyblivá luneta * Nožná brzda (CE) * Elektrická brzda (CE)

Stav: dobrý (použitý), WEILER Praktikant 800R Lead and Feed Screw Lathe - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40 - 2000 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial - Tailstock Morse taper 3 - Drive power: 3 kW - Multifix quick-change toolpost with tool holders - Collet quick-clamping system incl. collets - Chuck guard - Chip guard with work light - Emergency stop - Change gears - Live centre - Drill chuck - Tool cabinet - Documentation Iodpfx Aowl Rlbjgujtn Dimensions: LxWxH 1.8 x 0.8 x 1.6 m / Weight 750 kg Subject to errors and omissions

Stav: veľmi dobrý (použitý), Rok výroby: 1988, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Capable of metric, inch, module, and diametral-pitch threads >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck Iodpetlu Scjfx Agujtn >> Live center Safety Features: >> Lead and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered is a used Weiler Condor 81 lathe from 1988 in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with a guard for safety. This is a very robust and powerful machine. The Heidenhain 3-axis digital readout makes operation easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test the machine under power at our site.

Stav: dobrý (použitý), Paralelný sústruh Tovaglieri Použitý, pochádza zo školského prostredia. Vo výbornom stave. Výška hrotov: 180 mm. Vzdialenosť medzi hrotmi: 700 mm. Priemer priechodu tyče: 45 mm. Itedpfx Agokt U E Isujn Dodávané príslušenstvo. K dispozícii 4 kusy, pokiaľ neboli predané.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Shaft Lathe with 3-axis K&C Digital Readout, COMPLETELY OVERHAULED with Inspection Protocol according to New Machine Tolerances Technical Data: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric Pitch Range: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle Brake Switchable Iedovrckqopfx Agujtn >> Drive Power: 2.0 / 4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Features: >> 3-axis K&C digital readout, new, 12 months manufacturer's warranty with user manual. Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 3-jaw wedge bar chuck in almost new condition, 200 mm, 1 set of jaws >> Multifix size B with 2 tool holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle safety guard >> Spindle brake >> 2 emergency stops On request: Lead and feed shaft covers About the Machine: Offered is a Weiler Commodor lead and feed shaft lathe in geometrically overhauled condition. The guides have been reground or hand-scraped as new. Acceptance according to test protocol. Resprayed in 2K high-gloss white. Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle safety guard, and two emergency stops — an absolutely as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and surfaces with a ground finish can be produced. You are welcome to inspect the machine under power at our premises to verify its exceptional condition.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: Itsdpfx Agowb Supoujn >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Supported thread types: metric, inch, module and diametral pitch threads >> Metric thread pitches: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake, switchable >> Motor power: 2.0/4.0 kW Itjdpfsvrcqdex Aguen >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction switching >> 200 mm three-jaw wedge bar chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Optional: Covers for lead and feed screw About the Machine: Offered here is a Weiler Commodor lead and feed screw lathe in a geometrically overhauled condition. The guides are newly ground or scraped. Acceptance according to test protocol. 2K white gloss paintwork. The Multifix tool post and chuck are new. Safety: The lathe features a brake motor, electronic spindle protection, and two emergency stops—an absolutely as-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. Iedpfx Agswrmuxjujtn >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-axis Digital Readout K&C NEW Excellent Condition!! Technical Data: >> Year of manufacture: 1991 Machine No. 91-160-2804 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch possible >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> NEW K&C 3-axis digital readout, 12 months manufacturer's warranty, with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zero setting, count direction switching >> Quick-clamping device, collets from 1 to 29 mm in 1 mm increments >> NEW 160 mm three-jaw chuck with jaws >> Multifix size A with 2 tool holders >> Electrical chuck guard >> Bed stop >> Rear panel >> Machine feet >> Coolant unit About the Machine: Itodpfx Aswv S Ufsguen Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, built to toolmaker precision and in very good condition. The machine is, of course, fully functional. The Weiler was completely disassembled and repainted in light grey. All carriage movements are smooth and even. The Weiler also runs smoothly at high speeds. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view and test the machine under power onsite and see the condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Praktikant 160B Precision Centre Lathe, 3-Axis K&C Digital Readout NEW. Refurbished with certification protocol for new-machine tolerances. Technical Data: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake engageable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories & Equipment: >> 3-axis digital readout system from K&C, new, with 12-month manufacturer warranty and user manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> New collet chuck, NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> New LED machine lamp >> New machine feet >> Splash guard >> Operating manual, spare parts diagram (PDF) About the machine: Offered for sale is a Weiler Praktikant 160 B engine and leadscrew lathe in toolroom precision, fully overhauled geometrically. Refurbished with acceptance protocol for new-machine tolerances. For safety: Electronic work spindle protection, covers for leadscrew and feed shaft, 2 emergency stop buttons, and a braked motor. This newer generation of Weiler lathes is very user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power at our premises and see the condition for yourself. Iodpevrdlcsfx Agujtn

Stav: veľmi dobrý (použitý), Rok výroby: 1995, Funkcionalita: plne funkčný, Emcomat Emco EM20D lead and feed screw lathe, year of manufacture 1995, excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirement / dimensions approx.: Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Itsdpfx Agewag Stouon Accessories and features: >> 3-axis position indicator >> 1 pcs. 3-jaw chuck with 1 set of jaws >> Tool holder with 3 pcs. tool pockets >> Chip guard >> Coolant system >> Bed stop About the machine: For sale is an Emcomat 20D lead and feed screw lathe, year 1995, in barely used condition. The machine is, of course, fully functional. All carriage movements are exceptionally smooth and even. The bedways are in excellent condition. Take the opportunity to inspect this machine under power at our facility and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1986, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Leit- und Zugspindeldrehmaschine mit 3-Achs Digitalanzeige K&C NEU Technické údaje: >> Rok výroby: 1986, výrobné číslo: 86-160-348 >> Výška hrotu: 160 mm >> Vzdialenosť medzi hrotmi: 650 mm >> Počet rýchlostí vretena: 8, v rozmedzí od 96 do 2500 ot./min >> Priechod vretena: 40 mm >> Krátkokužeľová hlava vretena podľa DIN 55027, veľkosť 5 s bajonetovým uzáverom >> Koník: MK 3 >> Posuvy: od 0,02 do 0,63 mm/ot >> Možné závity: metrické, palcové, modulárne a diametral-pitch >> Metrické stúpanie závitov: 0,25 až 8 mm >> Hmotnosť cca 680 kg >> Vretenová brzda pripojiteľná >> Rozmery: dĺžka 1,6 m, výška 1,25 m, hĺbka 0,7 m Príslušenstvo a výbava: >> 3-osá digitálna indikácia K&C Nová, 12-mesačná záruka výrobcu s návodom na obsluhu Funkcie: prepínanie mm/palec, voľba súradníc ABS/INC, delenie zobrazenej hodnoty na polovicu, referenčná značka, programovanie nástrojov (200 pozícií), výpočet kužeľa, polomer/priemer, rýchle vynulovanie, prepínanie smeru počítania, >> Upínacie klieštiny, takmer nové, od 1 do 29 mm v krokoch po 1 mm >> Nové 3-čeľusťové skľučovadlo 160 mm s dvoma sadami čeľustí >> Mulifix veľkosť A s 3 držiakmi nástrojov >> Elektrický kryt skľučovadla >> Pozdĺžny doraz lôžka >> Zadná stena >> Nôžky stroja >> Chladiace zariadenie O stroji: Iedpfjwthbiex Aguetn Na predaj je sústruh s vedenou a ťahanou skrutkou Weiler Praktikant 160 B v presnosti vhodnej pre nástrojárov, vo veľmi dobrom stave. Stroj je plne funkčný. Stroja bol kompletne demontovaný a nanovo nalakovaný v svetlosivej farbe. Sanie sa pohybujú veľmi ľahko a rovnomerne. Aj pri vysokých otáčkach beží sústruh Weiler ticho. Táto novšia generácia sústruhov Weiler je veľmi užívateľsky prívetivá a umožňuje dosiahnuť povrchy s kvalitou brúsenia. Využite možnosť vidieť tento stroj na mieste pod napätím a presvedčiť sa o jeho stave osobne.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler centre lathe model Condor 81, leadscrew and feedscrew lathe with 3-axis digital readout from K&C, NEW. Geometrically overhauled with inspection certificate for new machine tolerances. Technical data: >> Machine no. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch possible >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake can be engaged >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and features: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching Isdewrm Dtopfx Agustn >> Collet chuck system NEW, collets NEW from 3 to 26 mm, 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, NEW >> Multifix size B, NEW, with 3 toolholders >> Bed stop >> Electrical chuck guard, NEW >> Rear splash guard >> Operators manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor 81 leadscrew and feedscrew lathe in very good geometrically overhauled condition. The guideways have been newly ground or hand scraped. Supplied with acceptance inspection according to test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. The Weiler runs very smoothly, even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to ground finishes. You are welcome to view and test the machine under power at our premises to convince yourself of its condition.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-axis Digital Readout by K&C, NEW Geometrically overhauled, with acceptance protocol for tolerances according to new machine standards!! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: Itedpfx Agjvambceusn >> 3-axis digital readout by K&C, new, 12-month manufacturer’s warranty with manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool programming (200 item memory), taper calculation, radius/diameter switch, quick zero, count direction selection >> Collet chuck system, brand new collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> New Multifix size A with 2 tool holders, NEW >> Bed stop >> Electric chuck guard, NEW >> LED machine lamp, NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. The slideways have been newly ground or hand-scraped. Acceptance according to inspection protocol. A very fine machine with electronic spindle protection. Accessories such as collets, chuck, and Multifix quick-change toolpost are all new. Spindle, spindle nuts, bearings, belts, and wipers have been replaced. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Emcomat 17D lead and feed screw lathe with 3-axis digital readout by K&C, like new from training workshop, excellent condition!!! Technical Data: >> Year of manufacture approx. 2000, Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (L x D x H): approx. 1.6 x 0.9 x 1.3 m >> Weight: approx. 730 kg Accessories and equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty inc. user manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter mode, rapid zeroing, counting direction reversal >> 1 new 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolpost with 2 holders >> Chip guard/back panel >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in very good condition. This Emco is equipped with a brand new K&C 3-axis digital readout and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Itsdowvuf Tjpfx Aguen