Vŕtacie automaty kúpiť použité (27)

Stav: dobrý (použitý), Držiaky, pre flexibilnú hriadeľovú brúsku, jednotku pre obrábanie pinol, automat na vŕtanie, vŕtačku, stĺpovú vŕtačku, viacvretenovú vŕtačku, radovú vŕtačku, vŕtačku na čapy Hnsdjcgan Topfx Agtjg -Výrobca: Suhner -Číslo výkresu: bez; pohon -Upínanie: Ø 14 mm -Počet: 5 ks k dispozícii -Cena: za kus -Rozmery: 140/33/H33 mm -Hmotnosť: 6 kg/kus

Stav: veľmi dobrý (použitý), Stĺpová vŕtačka Alzmetall AC 25, rok výroby 1992. Veľmi dobrý stav, možnosť predvedenia pod prúdom. Hnsdpfxsx Sqv Hj Agtog

Stav: dobrý (použitý), 12-hlavová vŕtačka na predaj, Hjdpfjpy D Dwsx Agtjng Veľkosť stola: 400 x 360 mm

Stav: dobrý (použitý), Rok výroby: 2000, Vŕtacia jednotka SUHER Power master, rok výroby 2000. Hedpfexr Dlxox Agtsng

Stav: nový, Rok výroby: 2023, Rúrková vŕtačka, šikmá vŕtačka, automat na vŕtanie TDM100, manuálny, s jednou vŕtacou hlavou DOSTUPNÉ IHNEĎ ZO SKLADU + MOŽNOSŤ PRIORITNÉHO ODOSLANIA A PREVÁDZKY POD PRÚDOM - Minimálne dávkované mazanie - Manuálne upínanie materiálu - Manuálny posuv - Max. dĺžka rúrky 3 000 mm (voliteľne 6 000 mm) - Presnosť polohovania +/- 0,2 mm - 10 dorazov (možnosť rozšírenia) - Vkladanie a vyberanie materiálu manuálne - Vŕtacia hlava výkyvná +/- 50° - Manuálne otočné zariadenie s rozsahom 360° pre rúry - Výkon vŕtacej jednotky 1 x 2,2 kW - Otáčky motora 295 - 2 950 ot./min. - Zobrazenie otáčok na dotykovom paneli - Osvetlenie vŕtacej jednotky - Integrovaná skrinka na náradie - Kruhové rúrky do 114 mm Hnsdpfjlgvkisx Agtog - Štvorcové profily do 100 x 100 mm - Plochý materiál do 100 x 15 mm - T-profily do 100 x 100 x 12 mm - L-profily do 100 x 100 x 8 mm - Dvojité stĺpy do 100 x 15 mm - Trecie vŕtanie do M12 - Vŕtacie otvory do Ø 50 mm

Stav: použitý, Vysokovýkonná vŕtačka ALZMETALL typ Abomat 20 Výrobná vŕtačka Výrobné číslo: 452 Rok výroby: 1996 Vŕtacia kapacita v ocele ST 60: 25 mm Vŕtacia kapacita v liatine GG 20: 30 mm Upínanie vretena: SK 40 – M16 Vyloženie: 280 mm Zdvih vŕtacieho sania: 500 mm Vzdialenosť čela vretena od stola: 185 – 685 mm Rozmer stola: 490 x 400 mm Hnsdsikrtqopfx Agtog Otáčky vretena: 50 – 500 ot./min, plynule nastaviteľné Posuv vŕtacieho sania: 20 – 224 mm/min, plynule nastaviteľný Rýchloposuv vŕtacieho sania: 4,5 m/min Výkon motora posuvu: 0,18 kW Výkon motora rýchloposuvu: 0,75 kW Výkon motora vŕtacieho vretena: 1,1 kW (otáčky 1000 ot./min) Pripojenie na sieť: 400 V, 50 Hz - Otáčky vretena plynule nastaviteľné cez frekvenčný menič - Posuv vŕtacieho sania plynule nastaviteľný cez frekvenčný menič - 2 prevádzkové režimy: nastavovanie a automatická prevádzka - Centrálne mazanie - Riadiaca skriňa na zadnej strane stroja - Otočný ovládací pult - Montované na oceľovej doske (700 x 650 x 40 mm) s presným nastavením výšky Priestorové nároky D x Š x V: 1200 x 700 x 2530 mm Hmotnosť: cca 1000 kg Dobrý stav

Stav: dobrý (použitý), Viacvretenová hlava, viacvretenová vŕtacia hlava, vŕtacie prevodové ústrojenstvo, vŕtačka s automatickým posuvom - Výrobca: Desoutter, AFD – automatická vŕtačka a závitovačka s posuvom - Typ: AFDE-40 - Otáčky: 3800 ot./min - Viacvretenová hlava: Desoutter typ 174183, rozstup vretien 10 až 67 mm - Motor: ABB 0,33 kW - Osadené klieštiny: Ø 3 mm - Počet: 1 kus k dispozícii - Rozmery: 890/220/V150 mm - Hmotnosť: 12 kg Hnodjra Rntjpfx Agtsg

Stav: použitý, Rok výroby: 1993, Technical details: Workpiece thickness - max.: 80 mm Workpiece thickness - min.: 5 mm Plate size without repositioning: 2000x1000 mm Plate size - min.: 100x100 mm Longitudinal travel: 2800 mm Cross travel: 1000 mm Control unit: CNC Mubea Matic100 Hole diameter - min/max: 10/40 mm Tool holder: Taper/cone/cono DIN 6327 Drill spindle stroke - max.: 150 mm Positioning accuracy: +/- 0.5 mm Spindle speeds: 112-180-224-280-355-560 rpm Travel speed: 80 m/min Feed length - max.: 150 mm Rapid traverse: 8 m/min Work table: Length 2500 mm; Width 950 mm Workpiece weight: 750 kg Deburring unit - max.: d=40 mm Working height: 1050 mm Gripper device: 4 units Gripper jaw opening - min/max: Type I: 5/45 mm Gripper jaw opening - min/max: Type II: 45/85 mm Compressed air connection: 6 bar Total power requirement: 30 kW Machine weight (approx.): 5.5 t Required floor space (approx.): LxWxH: 5.0 x 5.5 x 2.7 m (depending on installation) 2-axis CNC-controlled plate drilling system for the automatic processing of sheet and flat material Comprises: machine frame, Y-axis traverse unit, X-axis traverse unit, positioning unit, deburring unit, drilling unit, material support tables, hydraulic unit, and control cabinet Additional technical information: - Plate size can be processed up to 1000x4000 mm by repositioning! - Material support tables feature supports and a guide rail for guiding and transporting the positioning carriage (approx. L:2500xW:950mm, loading capacity approx. 750kg) - Drill bit cooling via compressed air - Control for 2-axis positioning: X-axis 80 m/min, Y-axis 30 m/min - Control system memory capacity: approx. 10,000 programs Equipment includes: - 1 positioning carriage, 2 material support tables, continuous material feed, - Control cabinet, operator panel, rack, deburring unit, Hnjdpfsu Id Rusx Agtjg - CNC screen control Accessories: Roller conveyor 1800x1000 mm and roller tables 2x1000 mm The machine is available for sale, ready for transport from Leipzig.

Stav: nový, Rok výroby: 2024, UNIBOHRFIX 100 E Fully Automatic Drilling Machine, Measuring Length 6000mm (2-Axis NC Drilling Machine) Item no. 6019 Hodpfx Ajfu Irzjgteng With the fully automatic drilling machine UniBohrFix 100, your material is positioned at the desired location along the X-axis, clamped, and drilled. You simply need to press the start button. The horizontal gripper of the positioning system allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After entering the X and Y values or recalling a previously saved program, the machine operates completely autonomously. Advantages • A sequence of holes is automatically drilled at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower required. Fully automatic version Measuring length: 6,000 mm Overall length: 13,500 mm NC 2-axis control including LAN interface for data transfer Pneumatic vice (clamping range 200 mm); alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV; alternatively also available with Unimax 4 Basic (Technical data see data sheet) Anti-twist device Thread cutting unit Motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning possible using absolute or chain measurements Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel support profile protects against contamination Infeed and discharge material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / height-adjustable rollers / Mounting brackets / roller width 407 mm / insertion plates / cross braces Roller diameter 50 mm / steel rollers You are welcome to view the system at any time in our production/demo hall. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stav: dobrý (použitý), Rok výroby: 2000, Vŕtacia jednotka SUHNER Mono master Typ: BEM12 ST25 1040, r.v. 2000, so Siemens motorom. Hnodoxr Dk Uopfx Agtsg

Rok výroby: 1993, Stav: pripravené na použitie (použité), Automatická vŕtačka Schüco 293784, rok výroby 1993, určená na vŕtanie dverných pántov, 8 vŕtacích hláv, Hsdpfx Aed R Sdyjgtjng

Stav: použitý, High-performance drilling machine ALZMETALL Type Abomat 20 Production drilling machine Serial no. 449 Year of manufacture: 1995 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat depth: 280 mm Quill stroke: 500 mm Spindle distance, max.: 685 mm Spindle distance, min.: 185 mm Table size: 490 x 400 mm Spindle speed: 2,000 rpm Automatic feed: 224 mm/min Rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Hjdpfxogd Ipke Agtong Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Production drilling machine with one spindle speed and one feed rate - Current spindle speed: 2,000 rpm - Current feed rate: 224 mm/min - Two modes of operation: manual and automatic - Electrically adjustable drilling head height - Central lubrication system - Control cabinet mounted at the rear of the machine - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Required space (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 900 kg Good condition

Stav: nový, Rok výroby: 2023, Pipe Drilling / Angle Drilling Machine Drill Automat TDM100 2D AT – automatic with two opposing drilling units - Minimum quantity lubrication - Manual material clamping - Automatic feed and automatic pipe rotation - Max. pipe length 3,000 mm - Positioning accuracy +/- 0.2 mm - Drilling unit power 2 x 2.2 kW Hnodpfjlgzytjx Agtjg - Material loading and unloading manually - Drill heads swiveling +/- 50° - Manual 360-degree swivel mechanism - Motor speed 295 – 2,950 rpm - Operation via touch panel - 100 programmable positions - Drilling unit lighting - Integrated tool cabinet - Round pipe up to 114 mm - Square tube up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double posts up to 100 x 15 mm - Flow drilling up to M12 - Drilling up to Ø 50 mm

Stav: dobrý (použitý), Rok výroby: 2017, Funkcionalita: plne funkčný, hĺbka hrdla: 300 mm, celková dĺžka: 5 000 mm, celková výška: 1 980 mm, celková hmotnosť: 450 kg, otáčky vretena (min.): 30 ot./min, maximálna rýchlosť vretena: 2 400 ot./min, pojazdová vzdialenosť osi X: 300 mm, zdvih osi Y: 4 000 mm, priemer stĺpa: 140 mm, hĺbka vŕtania: 175 mm, model regulátora: Siemens S7-1200 mit 7" Farb-Touchdisplay, typ pohonu: Servomotoren, merací rozsah os X: 4 000 mm, normálna vrtacia kapacita: 45 mm, rezacia kapacita závitov: M 36, The drill automation system allows for both manual and fully automatic operation. After each drilling process, the drill automatically moves in the X and Y axes to the next drilling position – fully automatic drilling procedure. UNIMAX 4 Column Drilling Machine Powerful, universally applicable column drilling machine with infinitely variable feeds and spindle speeds. Cycle programming is possible for complex workflows, chip breaking, swarf removal, LCD graphics with operator guidance, digital display of speed, drilling depth and feed, automatic spindle alignment for tool ejection, electronic drill guard. Technical Data: - Continuous drilling capacity: 40 mm* - Standard drilling capacity: 45 mm* - Thread cutting capacity: M36 - Spindle: MT 4 - Drilling depth: 175 mm - Throat: 300 mm - Spindle/Table distance: 70 to 825 mm - Table surface: 650 x 500 mm - T-slots to DIN 650: 14 mm - Column diameter: 140 mm Hedpfewfd Ayox Agtong - Overall height: 1980 mm - Weight: 475 kg - Feed speed: 30 to 1650 mm/min - Frequency-controlled three-phase motor: 7.5 kW - Stepless spindle speeds: 30 – 2400 rpm - Operating voltage: 400 V - Frequency: 50 Hz - Network protection: 16 A - Protective earth – plug and connecting cable included. Connection only to a VDE 0100 compliant network with functional protective conductor. - Residual current circuit breaker over 100 mA - Noise level at idle at maximum spindle speed Accessories: • Turret head • Drill guard for uni 4+BS 50 • Anti-rotation device • Motorised height adjustment • 25kg gas spring counterbalance • Flange spindle MT4 • Automatic turret head ARBO 20 with 6 mounting holes • Gear motor A20 • Driving pin MT4 • Collet for fastening the drilling head to the machine • Tapping spindle A20 for quick change adapters SWE 1, 1:1, M3-M16 with length compensation • Quick change chuck for taps SWE 1 • Working spindle 1:1 with quick change chuck • Bilz ASR 25 • Clamping range with standard collet ER25 up to D16mm • Toolholder for quick change chuck • Pneumatic machine vice, clamping width: 300mm FURTHER IMAGES ON REQUEST

Stav: nový, Rok výroby: 2024, UNIBOHRFIX 100 H Plnoautomatický vŕtací automat, meracia dĺžka 6000 mm Obj. č. 6020 Hnsdjfu Itbspfx Agteg Pri plnoautomatickom vŕtacom automate UniBohrFix 100 je váš materiál na osi X polohovaný na požadovanú pozíciu, upnutý a vyvŕtaný. Stačí len stlačiť tlačidlo štart. Do horizontálneho upínača polohovacieho systému možno jednoducho pneumaticky upnúť okrúhle rúry, obdĺžnikové rúry, uhlové profily, ako aj ploché a plné materiály. Po jednoduchom zadaní hodnôt na osi X alebo načítaní už vytvoreného programu pracuje automat úplne samostatne. Osi Y môže používateľ nastavovať pomocou ručného kolieska s digitálnym zobrazením. Výhody • Séria otvorov je vykonávaná automaticky s precíznymi rozstupmi. • Možné chyby obsluhy sú výrazne znížené. • Programovanie trvá len niekoľko minút. • Veľmi dobrý pomer ceny a výkonu. • Výrazné zníženie potreby pracovnej sily. Plnoautomatické prevedenie Meracia dĺžka: 6 000 mm Celková dĺžka: 13 500 mm NC 1-osové riadenie Pneumatický upínač (rozpätie 200 mm) Zariadenie na minimálne dávkovanie chladiva s držiakom a tryskou Vŕtačka: Unimax 3T AV (technické údaje viď technický list) Zabezpečenie proti pretočeniu Motorické nastavenie výšky Zariadenie na rezanie závitov NC polohovací systém PD 200p Vysúvacia sila 200 kg Možnosť polohovania podľa absolútnych alebo reťazových rozmerov Pojazd s jednosmerným servomotorom a enkóderom Pojazd 12-násobne uložený na guľôčkových ložiskách Pneumatické upínanie dorazu s vysokou držnou silou Oceľová vodiaca lišta s presným ozubením Oceľový nosný profil ako ochrana proti znečisteniu Vstupný a výstupný valčekový dopravník RD-200/4 Dĺžka: 6 000 mm / 7 000 mm / nosnosť 200 kg/m / výškovo nastaviteľné valčeky / montážne konzoly / šírka valčekov 407 mm / priehradky / výstuhy / priemer valčekov 50 mm / oceľové valčeky Plantec Maschinen GmbH

Stav: použitý, Rok výroby: 2001, Drilling capacity in steel (diameter): 32 mm Throat depth: 322 mm Hjdpfeu Rt Iuex Agtong Quill stroke: 180 mm Table size: 500 x 370 mm Spindle taper: MK 4 Spindle speed range: 55 - 5000 rpm Control software: Special Total power requirement: 3 kW Machine weight: approx. 0.52 t Space requirement: approx. 1 x 1 x 2.35 m Column drilling machine with ARBO 20 turret head attachment. Spare parts are included with the machine.

Stav: použitý, Pinolová obráběcí jednotka, vrtací automat, vrtačka, stojanová vrtačka, vícevřetenová vrtačka, řadová vrtačka, kolíkovací vrtačka -max. posuv zdvihu: 150 mm -pohon: 1,1 kW 2750 ot./min Hnjdpfx Ajcgqdfegtog -upínání závit: M8 -počet: 3x vrtací hlavy k dispozici -cena: za kus -rozměry: 700/180/V180 mm -hmotnost: 26 kg/kus

Stav: použitý, TECHNICKÉ ÚDAJE Viz fotografie Hsdpouhabgofx Agteng

Stav: nový, Rok výroby: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” The UniBohrFix 50 drilling system allows for machining of all profiles, either against a stop or using a gripper. Drilling is performed manually via a lever, while materials are automatically moved on the X-axis to the next drilling position. You can efficiently run entire programs or use a stop plate for quick single drilling operations. The system is suitable for weights up to 100 kg. It also includes a minimum quantity spray unit with holder and spray can. Technical specifications for the standard version can be found in the table below. All components can be customized to your requirements if necessary. You can choose between different drilling machines, roller conveyors, positioning systems, and vices. Plantec will configure the system to perfectly suit your needs! ADVANTAGES - A sequence of holes is executed automatically at precise intervals. - Operator errors are drastically reduced. - Programming takes only a few minutes. - Excellent price-performance ratio. - Significant reduction in labor requirements. Standard Measuring Lengths: - 3,000 mm - 6,000 mm Drilling Machine: Unimax 2 T Spindle: MK2 Continuous Drilling Capacity: 18 mm Spindle Speed Ranges: 100-2000 rpm, 200-4000 rpm Throat Depth: 225 mm Hjdpfx Asgwt Slegtsng Spindle/Table Distance: 60-400 mm Adjustable vice with linear measurement display Positioning Stop: PD-100e Controller for automatic positioning Positioning: Absolute or incremental Easy-to-read LED display Carriage with DC servo motor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring damping Stop plate with slot Memory controller with 3,000 storage positions Roller Conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Feed plates Cross bracing for stabilization Control cabinet Available options: - Minimum quantity spray system with spray head and holder - Gripper for clamping material on the stop plate

Stav: použitý, Rok výroby: 1984, Drilling capacity in steel (diameter): 30/35 mm Throat depth: 300 mm Drilling stroke: 140 mm Table size: 700 x 500 mm Hedpfsu Rt Hqex Agtong Spindle taper: MT 3 Spindle speed range: 65 - 1750 rpm Total power requirement: 1.7 kW Machine weight approx.: 0.7 t Required space approx.: 1 x 1 x 2 m Pillar drilling machine

Stav: použitý, Jednotka pre obrábanie hrotu vretena, automatická vŕtačka, stojanová vŕtačka, viervretenová vŕtačka, radová vŕtačka, vŕtačka na kolíky -max. posuv: zdvih 150 mm -pohon: 1,5 kW 2750 ot./min -upínanie: závit Hnedpfx Agsci Ahtoteg -množstvo: 1x vŕtacie hlavy k dispozícii -cena: za kus -rozmery: 700/200/V180 mm -hmotnosť: 18,3 kg/kus

Stav: použitý, TECHNICKÉ ÚDAJE Hjdpfx Aeuhabaogtong Viz fotografie

Stav: nový, Rok výroby: 2024, Kudu drilling machine with NC control and manual tool change (3 axes) Drilling automation system with a movable processing unit— the table remains stationary, and the drilling head traverses. The system can be operated both manually and fully automatically. After each drilling operation, the processing unit moves automatically in the X and Y axes to the next drilling position. The operation is designed to be user-friendly. Programming is performed directly via the machine control unit. The system is very robust and consists of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Sturdy machine base • Drilling head speed: up to 2,800 rpm • Tool holder: HSK 50 • X, Y, and Z axis driven by servomotors • Rapid traverse (X axis): 18 m/min • Rapid traverse (Y axis): 5 m/min • Distance from table top to lower edge of tool holder: 245 mm Hnodpofu Iwmjfx Agtjg • Table width: 450 mm • Working height: 1,005 mm • Drilling diameter: 3 to 15 mm in steel, 50 mm (tool dependent) • Y-axis machining path: 230 mm • Tolerance in X axis: ±0.1 mm/m • Tolerance in Y axis: ±0.05 mm • Tolerance in Z axis: ±0.05 mm • System weight: 2,000 kg • System dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • System safeguarded at the front by light barrier • Rear access protection with machine guard fence • Simple programming at the machine • Cooling by minimum quantity lubrication system • Without material clamps • Digital handwheel Your Advantages: • Gentle handling of workpiece surfaces • Clear graphical user interface • Machining directly at the workpiece end is straightforward • Saves 50% floor space compared to traversing machining units • Chips are collected in a chip tray • Easiest programming and operation You are welcome to view the required system at any time at our production/demonstration facility. Feel free to contact us. Plantec Maschinen GmbH

Stav: použitý, TECHNICKÉ ÚDAJE - Otáčky vretena: 400 - 4 500 [ot./min.] - Vŕtacia kapacita v oceli / liatine: 10 / 13 [mm] - Hĺbka vŕtania: 60 [mm] - Vzdialenosť vretena od stĺpa: 185 [mm] - Využiteľná plocha stola: 220 x 300 [mm] - Výkon motora: 0,5 [kW] - Napájanie: 220 [V] - Výber otáčok prostredníctvom indikácie priemeru vrtáka a materiálu - Elektronická regulácia otáčok vretena - Plynulá regulácia otáčok vretena v rozsahu 400 až 4 500 ot./min. - Konštantné otáčky počas zaťaženia - Nastaviteľná výška vŕtacej hlavy pomocou pneumatického vyrovnávacieho zariadenia - Jemné nastavenie hĺbky vŕtania pomocou milimetrového nonia Hjdpsuhabtsfx Agtjng - Elektronická ochrana motora - Základová doska kompletne opracovaná (220 x 300 mm)

Stav: nový, Rok výroby: 2024, The drilling unit can be operated both manually and fully automatically. In the standard configuration, after each drilling cycle the system automatically moves to the next drilling position along the X and Y axes. ADVANTAGES Significantly reduces potential operator errors. Programming takes just a few minutes. Substantial reduction in required manpower. Product Details Standard measuring lengths: 3,000 mm 6,000 mm Drilling machine: Unimax 3 T AV (alternatively available with Unimax 4 Basic) Continuous drilling capacity in E 335: 25 mm Standard drilling capacity: 30 mm Tapping capacity: M 20 Spindle: MK 3 Automatic feed (3T AV): 30 – 400 mm/rev Drilling depth: 125 mm Column diameter: 110 mm Weight: 250 kg Pole-change motor: 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Infinitely variable spindle speeds: Range A: 80 – 1,400 rpm Range B: 180 – 3,200 rpm Motorized height adjustment, anti-rotation lock Optional: Thread cutting unit Fully automatic version: Automatic X-axis positioning Automatic Y-axis positioning Automatic drilling cycle Total length: 7,500 mm Manual drilling possible Coordinate table with motorized Y-axis drive, controlled via PLC Y-axis travel: 200 mm Movable clamping table with motorized X-axis drive, controlled via PLC X-axis travel: 3,000 mm Clamping table with T-slot for pneumatic clamps and material support blocks 2-axis control with memory for up to 3,000 programs Minimum-quantity lubrication system with spray head and holder You are welcome to visit our manufacturing/demo facility to view the system at any time. Feel free to contact us for more information. Plantec Maschinen GmbH Hnedpfx Agofu Swxstjg