Kotúčové bránenie

Amazone Catros 5000-2

Stav: nový, Screw compressor with refrigerated dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic controller. Efficient compressor stage. Perfect solution for industrial and craft businesses. Outstanding compressed air quality. Detailed specifications: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerated dryer: Integrated, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Motor rated power; IP55: 7.5 kW Oil volume: 3.2 l Pressure dew point of refrigerated dryer (20°C, 100% RH): approx. +3°C Installation data: Ambient temperature min. / max.: 1 / 46°C Δ T above cooling medium temperature: 2°C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / phase / frequency: 400 / 3 / 50 V / Ph / Hz Ppjdowm Ih Aepfx Aa Usr Refrigerated dryer power (230V/50Hz): 0.27 kW Dimensions and weight: Length x width x height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" internal thread Compressed air receiver capacity: 270 l INCLUDED OPTION: Aftercooler C43 MINI (to minimize condensate formation)

Stav: takmer ako nový (použitý), Rok výroby: 2023, Mandrel Bending Machine S4501 ----- For producing tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (Steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (Stainless steel 0.2 260 N/mm2) → Total connected load 3 kW → Tube feed length approx. 1.5 m Robust, durable steel construction. Maintenance-free servo drive for the bending, feed, and rotating axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed in place by the chuck on the carriage, ensuring precise positioning and thus the production of dimensionally accurate geometries. As standard, the machine also includes a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not give clearance, preventing operator error. Optional additional features provide more convenience, higher output, and therefore increased operational efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing tube geometries can be imported with the software. Standard equipment: → Servo drive for bending axis 1.5 kW → Adjustable speed → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Ppodpfx Aotr U Hlea Usr PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the control calculates the feed values and bending angles automatically. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Stav: dobrý (použitý), Priemer sústruženia nad lôžkom: 280 mm Psdpfx Aasyz Dg Rs Uopr Priemer sústruženia nad suportom: 170 mm Dĺžka sústruženia: 600 mm Hmotnosť stroja cca: 400 kg Vrtanie vretena: 26 mm Rozsah otáčok: 55-2000 ot./min. Celkový príkon: 1,4 kW Potrebný priestor cca: 1,5 x 0,8 x 1,3 m Vrátane brúsneho suportu EMCO SOD Vrátane štvorčeľusťového skľučovadla EMCO Vrátane strojových nôh Vrátane výmenných kolies

Stav: použitý, Rok výroby: 2017, Priemer rúry (max.): 80 mm, dĺžka tŕňa: 4 500 mm, Dornbiegemaschine S8004 ----- For producing dimensionally accurate tube geometries with bending radii up to 1.5xD → Maximum bending capacity for tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity for tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity for tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube feed length: 4.5 m Robust and durable steel construction with a rigid, force-locked joint—no susceptibility to torsion due to split designs such as separate bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The controller's touch display enables simple and intuitive programming and operation of the machine. After the tube is inserted, it is fixed by the chuck in the carriage, ensuring precise positioning of the tube and thereby allowing the creation of dimensionally accurate tube geometries. Standard features also include a geometry check prior to the bending process: if the bending sequence is started in an incorrect position, the machine will not allow the operation, preventing misoperation. Optional features add convenience and increase productivity and thus the system's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is via USB stick or FTP access from the computer to the machine control. USB or LAN (RJ45) interfaces are provided as standard. Existing tube geometries can be simply and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive for bending axis, 4 kW → Rotation speed: 2.9 rpm (=17°/s) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic twist measurement ±0.1° → Manual stop system (length stops) → Manual indexing system (15° in twist) → Three-jaw chuck for tube clamping in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB Pedpfx Aettah Roa Uopr → Footswitch operation → Data transfer via (W)LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. The controller calculates feed values and bending angles directly after input of length and angle. Hydraulics: → Hydraulics power: 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (available as optional extras): → Variable bending speed via frequency inverter or servomotors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length and rotation) → Mobile version (rollers) → Radius extension Images show a new machine

Stav: dobrý (použitý), koník Veľkosť pinoly: MK 2 Zdvih pinoly: 30 mm Výškovo nastaviteľný Výška hrotu: 250 – 285 mm Pedpfx Asdlp Txsa Ujpr Natočiteľný od -5° do +15° Základňa: 230 x 155 mm Hmotnosť: 27 kg

Stav: použitý, Rok výroby: 2022, prevádzkové hodiny: 372 h, typ paliva: nafta, výrobca motorov: 4045HP551-SV, Purpose of use: Construction Unladen weight: 2,960 kg Generator output: 110 kVA Water tank capacity: 1,100 l Transport dimensions (L x W x H): 3,640 x 1,200 x 2,295 mm Please contact our Sales Department for further information. Over 85 years of sales experience in the Netherlands. An expert team dedicated to finding tailored solutions for your needs. 1,000 operating hours or 1-year warranty: maximum security. Ppedswgvq Espfx Aa Uor Available around the clock, seven days a week. Fast service. Large stock, immediately available.

Stav: nový, Počet kolies (ks): 4 Priemer kolies: 120 mm Šírka kolies: 60 mm Ppsdpfx Aasdmk Eko Uor Rýchlosť posuvu: 3,5 / 5 / 7 / 10 / 12,5 / 16 / 25 / 32 m/min Výkon motora: 750 W / 550 W Rám stroja: liaty hliník Smer posuvu: dopredu / dozadu

Stav: použitý, Rok výroby: 2022, Kotúčová sekcia 510 mm zubatá, hydraulické nastavenie pracovnej hĺbky kotúčovej sekcie, hydraulické nastavenie pracovnej hĺbky vyrovnávacej jednotky, radličky C-Mix-Ultra pre Ceus 50, hydraulické nastavenie pracovnej hĺbky radličkového poľa s hydraulickým ojom, HD radlička 80 mm / (14/K1) Podpotz Tplefx Aa Ujpr

Stav: dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, nosnosť: 170 kg, dosah ramena: 2 700 mm, Model: KR 200 L170-2 comp Stav: POUŽITÝ Rok: 2007 Riadiaca skriňa: KRC2 ed05 Ppedpfx Aeq A Uq Uja Uor Súčasťou dodávky: Manipulátor + riadiaca skriňa KRC2 ed05 + všetky sady káblov + učiteľský ovládač (teach pendant) Kontaktujte nás pre cenovú ponuku a možnosti repasovania. Ako PLC Merkezi EOOD máme na sklade viac ako 300 robotov značiek KUKA, ABB, FANUC a Motoman.

Stav: použitý, Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-position angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm Ppedpfx Asq Nipyea Uor 2x Ø 30 mm Equipped with: - 4 mandrels - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine dimensions (LxWxH): 400 x 100 x 120 cm Machine weight: 1500 kg