Excentrický press - jeden stĺpec

AMBOLD PEEV 40.3

Rok výroby: 1965, stav: použitý, Pressure: 150 t Throat depth: 550 mm Stroke: 10 – 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 – 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight approx.: 12 t Space requirement approx.: 3 x 1.7 x 3 m Iiedpscubatsfx Ag Noc - with auxiliary brake - ram weight compensation - motorized ram adjustment - central lubrication (manual) - rupture plate - clamping plate for table - safe for manual loading and unloading - operating manual available

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 2021, prevádzkové hodiny: 98 h, nosnosť: 200 kg, zdvíhacia výška: 13 000 mm, stavebná výška: 2 100 mm, typ paliva: elektrický, typ pohonu: Elektro, Kĺbová teleskopická plošina Technický stav: veľmi dobrý Predné pneumatiky typ: plná guma Isdpsvky D Ssfx Ag Nsic Predné pneumatiky rozmer: 600x190 Zadné pneumatiky typ: plná guma Zadné pneumatiky rozmer: 600x190 Batéria Volt: 48V CE certifikát,

Stav: použitý, Rok výroby: 1970, číslo stroja/vozidla: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Iisdpfofx Hv Hex Ag Nsc Pass-through opening in clamping plate: 110 mm Ram mounting surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable construction via hydraulic adjustment system, tiltable in 4 steps, pass-through opening to the rear (325 x 500 mm) and downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, mode selector switch for setting continuous or single stroke, emergency stop switch, piece counter, various accessories.

Stav: použitý, Rok výroby: 1989, Pressure: 250 t Iisdpfx Ajvut Ncog Nsc Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between side frames: 1000 mm Shut height: 615 mm Table surface: 1400 x 880 mm Table through-hole: 450/500 mm Table height above floor: 800 mm Ram surface: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Space requirements approx. 2.0 x 2.6 x 4.1 m Approved for manual feed operations in accordance with German accident prevention regulations (UVV) Equipped with pole-changeable motor, pneumatically actuated clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, centralized motor-driven lubrication, two-hand operation system. The machine can be inspected under power at our warehouse.

Stav: použitý, najazdené kilometre: 227 566 km, výkon: 130 kW (176,75 k), prvá registrácia: 05/2012, typ paliva: nafta, pohotovostná hmotnosť: 6 390 kg, maximálna hmotnosť nákladu: 6 110 kg, celková hmotnosť: 12 500 kg, konfigurácia náprav: 4x4, rázvor náprav: 3 050 mm, palivo: nafta, kabína vodiča: iný, typ prevodu: iný, emisná trieda: Euro 5, zavesenie: iný, počet sedadiel: 2, celková dĺžka: 5 100 mm, dĺžka ložného priestoru: 2 650 mm, šírka ložného priestoru: 2 000 mm, výška ložného priestoru: 4 000 mm, Rok výroby: 2012, prevádzkové hodiny: 16 641 h, stavebná výška: 3 360 mm, Výbava: hydraulika, klimatizácia, palubný počítač, pohon všetkých kolies, prípojné zariadenie, Unimog U400 405/12 vyniká svojou všestrannosťou a robustnosťou a je ideálny na použitie v poľnohospodárstve, ako aj v stavebníctve. Poháňa ho výkonný 4 249 cm³ dieselový motor s výkonom 177 k (PS) a emisnou normou Euro 5, čím spĺňa moderné ekologické štandardy. S celkovým počtom najazdených kilometrov 227 566 km a 16 641 motohodinami je vo veľmi dobrom stave. Unimog je vybavený ťažným zariadením, klimatizáciou, predným vývodovým hriadeľom a komunálnou hydraulikou, čo umožňuje flexibilné pripojenie prídavných zariadení. Iisdpfxor Uzths Ag Njc Rok výroby vozidla je 2012 a predtým bol používaný len jedným majiteľom. Vďaka svojim kompaktným rozmerom – 3 360 mm na výšku, 2 360 mm na šírku a 5 100 mm na dĺžku – napriek tomu ponúka pôsobivú užitočnú hmotnosť pri maximálnej povolenej celkovej hmotnosti 12 500 kg. Unimog má zelenú enviromentálnu známku, čo umožňuje jeho využitie v mestských emisných zónach. Prevádzkové hodiny: 16 641 h Predaj len podnikateľským subjektom (poľnohospodárstvo, slobodné povolania, malé a veľké podniky) alebo na export. Vyhradzujeme si právo na zmeny a medzičasový predaj.

Stav: nový, Rok výroby: 2024, lisovacia sila: 175 t, pracovná šírka: 3 050 mm, For sale is a high-performance DURMA press brake, model AD-S 30175, which is perfectly equipped for demanding metalworking tasks thanks to its comprehensive standard features and selected options. Standard Features: - Capacity and Size: 3050mm x 175 tons - Installation Height: 530mm - Throat Depth: 450mm - Stroke: 265mm - Axis Control: Precise 4-axis control - Safety Systems: Manual F. AKAS FPSC safety system, CE F.AKAS BVLT light curtains and safety enclosures provide the highest level of protection - Backgauge: Servomotor-driven backgauge with linear guides and recirculating ball screw system for maximum precision - Tool Clamping System: European standard for fast and secure tool change - Front Supports: Adjustable, supports handling of various workpiece sizes Selected Options: - Control Unit Upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization - Crowning: Motorized adjustment for even more precise bending results - Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increasing flexibility and precision - Quick Clamping: Manual quick clamping for more efficient tool change This DURMA press brake is ready to support your production with advanced technology and reliable performance. It is the ideal choice for operations that value precision, efficiency, and safety. Iodpfx Aorx Rkusg Noic For further information or if you are interested, please contact us. Don’t miss the opportunity to expand your manufacturing capabilities with this high-quality machine.

Rok výroby: 2002, stav: použitý, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power required 65 kW Machine weight approx. 7,500 kg Space requirement approx. m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing sanding machine Type 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Workpiece height max. approx. 1 – 50 mm Feed speed stepless approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt, Belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive non-woven abrasive available in various qualities, specially designed for deburring and cleaning surfaces, and for rounding radii on workpieces. Also suitable for workpieces with differing heights. Drive approx. 7.5 kW, disc oscillates via motor (2.2 kW) across the full belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Belt speed approx. 11 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 5.) Wet configuration = complete coolant system, comprising band filter unit with integrated pump in machine base, rotary feedthrough at the top of the deburring disc spindle, water return via the vacuum table, as well as water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and Ijdpfet Hw Shsx Ag Neic table adjustment, 3 x ammeters, etc., as well as workpiece pressure rollers front and back, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: Good – can be inspected under power Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stav: takmer ako nový (použitý), Rok výroby: 2024, Cantilever racking, double-sided, used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided uprights, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard Ijdjh Ek Daopfx Ag Njic - Includes horizontal and diagonal bracing for 1,300 mm bay spacing - Incl. mounting material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and extension possible at any time) - (Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface protection: all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolted cantilever arms and 2 base sections of 1,200 mm depth per upright, standard = 4 storage levels per upright side - Includes horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with notified delivery. The material is optimally packed for easy unloading. When installing outdoors, the load capacities are reduced by wind and snow loads. The base must be concrete, flat, suitable for dowels, and capable of bearing the applied loads. The ground conditions, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights are to be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the uprights have at least a 500 mm projection above the top storage level.

Stav: pripravené na použitie (použité), Rok výroby: 1980, Lisovacia sila: 300 ton Veľkosť stola: 1 200 x 850 mm Vyloženie: 400 mm Šírka barana: 1 100 mm Otvory v stole: 400 x 250 mm Montážna výška: 500 mm Počet zdvihov: 32 1/min Zdvih: 30 - 140 mm Iisdpfx Ajd A Hbcog Noc Nastavenie barana: 105 mm Hmotnosť: cca 19 500 kg Iné: - Schválené pre ručné vkladanie obrobkov - Vybavené bezpečnostným ventilom Herion Xsz 20 - Motorické centrálne mazanie tukom - Pneumatický vyrovnávací valec závažia barana - Motorické nastavenie barana - T-drážky v barane - Samostatný ovládací panel - Opravené ojničné ložisko Kryty pre predlohové koleso sú samozrejme k dispozícii - viď druhá fotografia.

Stav: použitý, Pressure 55 t Outreach 250 mm Stroke 10-90 mm Table size 640 x 495 mm Stroke rate 120 strokes/min Ram adjustment 55 mm Ram surface 290 x 210 mm Ram bore 40 H7 mm Drop-through opening in table 220 x 190 mm T-slots 22 mm Clamping plate 620 x 485 x 65 mm Total power requirement 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination Iisdpscp Apyofx Ag Nsc - Vogel central lubrication - Balluff cam controller - Electrically adjustable table height - Mechanical overload protection in the ram (shear pin) - Control cabinet with touchscreen - Foot switch