Širokopásové brúsky

Bütfering AWS Combi 1350

Stav: použitý, Rok výroby: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, incl. new feed belt Features and technical data: - Incl. combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Workpiece-controlled air cushion pressure pad - 4-way adjustable grit compensation - Pneumatic belt tensioning device - Rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and control of lateral belt tracking for even belt wear - Feed-in roller table - Digital display unit for the electrically driven workpiece thickness adjustment - Additional veneer sanding beam - 2x spare sanding shoes included - Sanding width: 1350 mm Guodewka T Sspfx Aglea - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Photos show the machine in non-refurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Rok výroby: 1997, stav: dobrý (použitý), • Pracovná šírka (mm): 1300 • CSD systém • Pričné brúsiace agregát • Pozdĺžne brúsiace agregát - topánka • Kefový agregát Gsdpfoidi Ivsx Aglsua • Ionizácia

Stav: veľmi dobrý (použitý), Rok výroby: 2011, used horizontal panel saw Gjdpfsymx S Dex Agleua Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs (first 3 pcs: double-finger) Air cushion tables, width 650 mm, 4 pcs x 2160 mm length Central blower: 1 unit with increased blower capacity – 3 inclined lifting clamps (double-finger) – 1 inclined lifting clamp (single-finger) – First air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1 – 150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressing device, min. pressing width 0 mm, max. pressing width full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17" flat display Labelling with part graphics / labelling program / label printer PICA 104

Stav: použitý, Rok výroby: 1989, Použitý stroj Rok výroby: 1989 Stav: Funkčne otestovaný Výbava a technické údaje: Max. hrúbka olepovacieho pásu mm: 20 Max. výška olepovacieho pásu mm: 51 Max. hrúbka materiálu v rolke mm: 3 Min. dĺžka obrobku mm: 140 Min. šírka obrobku mm: 60 Lepidlom systém: 1906 patrona Tlakové zariadenie Guedpfx Asw I U E Aegloa Frézovacie agregát 1920 na zarovnávanie do 20 mm a skosenie Potrebný priestor D x Š x V mm: 3150x1800x1375 Hmotnosť cca kg: 800 Miesto: Flörsheim Dostupnosť: Krátkodobo

Rok výroby: 1979, stav: dobrý (použitý), Podrezávacia kotúčová píla pod úrovňou, priečna píla, ťahová píla, kapovacia píla, formátovacia kotúčová píla, stolová kotúčová píla, hliníková kotúčová píla, panelová píla - Výrobca: Martin, formátovacia kotúčová píla, typ T 70 s automatickým posuvom - Výkon motora: 11 kW - Otáčky: 1445 ot./min. - Pílový kotúč: Ø 410 x 5 mm - Max. výška rezu: pri 90° 140 mm / pri 45° 110 mm - Rezy pod uhlom: do 45° - Posuvný stôl: 355 x 1500 mm - Celkové rozmery: 2275/2010/H1400 mm Guodpfxjhfufgo Aglja - Hmotnosť: 1058 kg

Stav: nový, Typ SK-1000-P6 Pracovná šírka: 1000 mm Minimálna pracovná dĺžka: 500 mm Pracovná hrúbka: 2–150 mm Rýchlosť leštiaceho valca: frekvenčne riadená Rýchlosť posuvu: 3–12,5 m/min Celkový výkon motora: 13,87 kW Motor kotúča: 1,5 kW × 1 Guedpjdmi Nisfx Aglja Motor priečny: 1,5 kW × 1 Motor špirálového valca: 2,2 kW × 2 Výkon posuvu: 2,2 kW Motor zdvíhania: 0,37 kW × 4 Výkyvný motor: 0,37 kW × 2 Zdvíhanie pracovného stola: 0,55 kW Prepravné rozmery: 3650 × 1850 × 2100 mm Hmotnosť: 4200 kg

Stav: použitý, Rok výroby: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two vertically aligned glazing beads. The right sawing unit is fixed, while the left unit is adjustable; the set cutting length can be read from a digital measurement display. Both units feature supports allowing for the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed right unit • Digital measurement display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cut height without support: 80 mm • Max. cut width at 90 degrees: 55 mm • Max. cut width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optionally 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Required space (standard configuration): 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support 1 pc Adjustments for rebated profiles 1 pc Adjustments for rebated profiles according to drawing: - Attachment for clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central support In the sketch below (in green) a beveled pressure pad is shown, which follows the inclined profile and thereby presses it against the (red-marked) shim on the stop. Location: Garbsen Godoxnlgcspfx Aglsua

Rok výroby: 2002, stav: použitý, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power required 65 kW Machine weight approx. 7,500 kg Space requirement approx. m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing sanding machine Type 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Workpiece height max. approx. 1 – 50 mm Feed speed stepless approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt, Belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive non-woven abrasive available in various qualities, specially designed for deburring and cleaning surfaces, and for rounding radii on workpieces. Also suitable for workpieces with differing heights. Drive approx. 7.5 kW, disc oscillates via motor (2.2 kW) across the full belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Gjdpfxjt Hw Sho Agloua Belt speed approx. 11 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 5.) Wet configuration = complete coolant system, comprising band filter unit with integrated pump in machine base, rotary feedthrough at the top of the deburring disc spindle, water return via the vacuum table, as well as water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc., as well as workpiece pressure rollers front and back, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: Good – can be inspected under power Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Rok výroby: 2022, stav: nový, Políc: 17 Čistá vzdialenosť medzi rúrkami: 60 mm Dĺžka nosnej rúrky: 650 mm Dĺžka: 200 – 2 000 mm Otočné kolieska: 4 kusy, polyamid Hĺbka: 870 – 1 180 mm Výška: 198 mm Gjdpfed Ry I Nex Agloua Nosnosť: 400 kg

Stav: nový, Rok výroby: 2025, Pracovná šírka: 510 mm Výška hobľovania: 250 mm Hobľovací valec: Tersa Gujdpfx Aegqwx Heglea Počet nožov: 4 Nastavenie výšky: elektrické Zobrazovanie hrúbky hobľovania: digitálny displej Podávacia rýchlosť: 8 / 16 m/min Podávací valec: oceľový Pritlačný nosník: segmentovaný Vypúšťací valec: oceľový Stolové valce: nie Výkon motora: 7 kW Priemer odsávacieho hrdla: 120 mm Dĺžka stroja: 800 mm Šírka stroja: 900 mm Hmotnosť: 650 kg