Valčekové dopravníky / zastavovacie systémy

BECK Exakt C Standard 3.000

Stav: použitý, Rok výroby: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two vertically aligned glazing beads. The right sawing unit is fixed, while the left unit is adjustable; the set cutting length can be read from a digital measurement display. Both units feature supports allowing for the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed right unit • Digital measurement display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cut height without support: 80 mm • Max. cut width at 90 degrees: 55 mm • Max. cut width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optionally 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Required space (standard configuration): 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support 1 pc Adjustments for rebated profiles 1 pc Adjustments for rebated profiles according to drawing: - Attachment for clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central support In the sketch below (in green) a beveled pressure pad is shown, which follows the inclined profile and thereby presses it against the (red-marked) shim on the stop. Location: Garbsen Ijdpfxjxnlgcj Afzsib

Stav: použitý, Cross-cut saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Milling Machine FZS-2 Electronic with infinitely variable slotting spindles and automatic roller table ----- Cross-cut saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Stepless saw positioning with Siko display * Safety and extraction hood with 100 mm suction port Isdpfjwgwlkjx Afzeib 2 Groove Spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Working length: 300 mm * Both groove spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm suction port * Automatic brake with speed monitoring Mitre Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block always in cutting plane for any angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Suction port diameter: 2 x 180 mm for groove spindles 1 x 100 mm for cross-cut saw ----- Price for the above-mentioned machine upon request! ----- Pictures show an identical model. Original images not yet available. (Technical specifications according to manufacturer's information – without guarantee!) All prices are net, plus statutory VAT.

Stav: nový, ALTENDORF F 25 ponúka všetko, čo musí vedieť formátovacia kotúčová píla, a to na malom priestore. Či už vo vašej prvej vlastnej dielni, pri každodenných prácach, v priemyselnej výrobe alebo ako výkonný druhý stroj – F 25 je kompaktný univerzál, ktorý vás urobí produktívnejšími. Materiály ako drevené dosky, masívne drevo, materiály podobné drevu alebo profilové tyče je možné vďaka prvotriednej presnosti, jednoduchej obsluhe a vynikajúcej kvalite rezu ľahko spracovávať. Jednostranne nakloniteľná pílová jednotka umožňuje aj šikmé rezy. Ľahko posuvný dvojitý pojazdný vozík podľa systému Altendorf, rovnako ako digitálne zobrazenie výšky a naklonenia, patria k štandardnej výbave. Stroj vhodný pre začiatočníkov i profesionálov. Dvojitý pojazdný vozík, nakloniteľný, manuálne nastavenie výšky a naklonenia, pravítko s manuálnym mikronastavením, uhlový a pokosový doraz, pripravené na dodatočnú montáž predrezového agregátu ----- Technické údaje ----- Rozsah naklonenia: 0 - 46° Dĺžka vozíka: 3 200 mm Šírka rezu: 1 000 mm Výška rezu: 100 mm Max. priemer kotúča: 315 mm Max. presah kotúča: 104 mm Verzia bez CE: max. priemer kotúča: 350 mm, max. presah kotúča: 121,5 mm Pozdĺžny doraz vysúvateľný do: 3 450 mm Otáčky: 4 200 min⁻¹ Výkon motora: 4,4 kW, 5,5 HP Výška pracovného stola: 880 mm - Veľký odsávací kryt voliteľný - - nový výstavný stroj - Iedeu R S Hcopfx Afzjib

Stav: nový, Glass Bead Nailer "2 P Jumbo Automatic E.C." - new - Your benefits: - Corner joints are closed - No open glass bead joints - No color variations when painting - Glass bead frames are easy to assign Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glass bead frames. Option for automatic or manual operation; With angle stop, clamping device from above and front Pressure adjustable separately. Insertion of parallel and superimposed staples possible via electronic programming control. Stapler can be mounted on a suitable worktable, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping ----- Images show the 2P Staple Corner Joining Machine with the option of mobile worktable (see details under surcharges) Surcharges: ----- Mobile worktable height adjustable from 700 to 1000 mm, 2 plug-in support rails Ijdpfxovnh T No Afzoib each 1000 mm long, 2 swivel and sliding support rails 1000 mm, support rails covered with felt, 4 castors, 2 with locking mechanism. ----- Surcharge: 1,311.00 Euro net Staples: Packages 15 mm staples (pack of 2,000 pcs): Price 22.00 Euro 12 mm staples (pack of 3,000 pcs): Price 32.00 Euro 10 mm staples (pack of 3,000 pcs): Price 32.00 Euro Dimensions and weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Worktable: 32 kg All prices net, plus statutory VAT. Ex works plus packaging and shipping (technical data according to manufacturer - without guarantee!)

Rok výroby: 2026, stav: nový, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table lineup. It is certified according to GS-HO-11 and bears the ‘Wood Dust Tested according to BGI 739-1’ seal. This makes it suitable for manual sanding operations as well as machining workpieces with handheld power tools. The grinding table is constructed from galvanized sheet steel. The extraction tray is aerodynamically optimized. Its funnel-shaped design with an integrated air duct directs the airflow precisely to the suction port. Connection to the on-site extraction system can be made via a choice of Ø 140 mm or Ø 160 mm suction ports, depending on the required extraction performance. The folded edge along both long sides of the work surface allows for face-side processing of workpieces. The extraction grids are aerodynamically aligned with the suction connection, ensuring optimal extraction results. For cleaning inside the grinding table, the slatted beech top can be removed, and the air duct can be detached by unscrewing just a few screws. The grinding table is supplied pre-assembled; only the legs need to be mounted and adjusted to the required working height. Iiodpfefyadbsx Afzsb Your advantages: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scaling • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grate • Funnel-shaped airflow to suction port Technical data: • Suction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Rok výroby: 2012, stav: veľmi dobrý (použitý), Linka na výrobu okien WEINIG zahŕňa: spracovacie centrum Unirex 3000 Univar 15 Unitex 15 Isdeh H Iyxspfx Afzoib

Rok výroby: 2024, stav: nový, Vozík na prepravu a skladovanie profilov vo vertikálnej polohe COMALL CARR 300 Q, nový Technické údaje: - 10 priehradiek s pracovnou šírkou 128 mm - Kontaktné plochy potiahnuté proti poškriabaniu a nárazuvzdorným plastom Isdpsf Nk H Hefx Afzjib - 4 kolieska Ø 125 mm, z toho 2 s brzdou - Ramená nastaviteľné v 5 rôznych polohách - Podporný stôl s gumovým poťahom - Nosnosť: 650 kg

Stav: použitý, Rok výroby: 1996, Funkcionalita: plne funkčný, Píla Graule ZS 170, rok 1996, 2 000 EUR Fréza Graule 6/250 - 160, rok 2008, 2 700 EUR Otočný zásobník na krídla a rámy, 500 EUR Valčeková dráha 7,5 m ako zásobník pre okná pred zasklievacou stanicou, 600 EUR Isdpewp Stzjfx Afzoib

Stav: nový, Saw blade diameter: 350 x Ø 30/40 mm Cutting diameter: 135 mm Cutting length: 430 mm Saw blade dimensions: 350x3.0/2.4x40 mm Speed: 3,800 rpm Extraction nozzle diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 100 kg Space requirement: approx. 1300 x 800 x 1600 mm Iodpfx Ajxabqzefzoib - Crosscut and mitre circular saws for cross-cut operations - Double-sided mitre adjustment (60° / 45°) with fixed stops - Mitre cuts on one side up to 45° with fixed stop - Rigid grey cast iron construction - Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade infinitely height adjustable - Connection for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x carbide circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastics - Hydraulic feed brake, steplessly adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable by hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stav: nový, Working length: 2,451 mm Working width: 2,170 mm Working height: 800-1,000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base frame - Steel tubular frame, 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1,000mm) - Conveyor system for wood lengths from 300mm to 4,200mm - Conveyor system for wood widths up to 240mm Roller conveyor – infeed - Infinitely variable speed roller conveyor, approx. 5 - 25 m/min - Drive via 0.37 kW gear motor, king shaft and PU round belts - Roller diameter: 50mm, roller length: 240mm with PVC coating - Transfer to cross conveyor by lifting/lowering of the roller conveyor - Roller covers according to HBG Cross conveyor - Cross conveyor with 6 cross beams - Conveyor belts PVC-coated (green), 50mm wide, guided in plastic channels - Infinitely variable speed cross conveyor, approx. 5 – 20 m/min - Drive via 0.37 kW gear motor - Approx. 1,750 mm from stop to stop Roller conveyor – outfeed - Infinitely variable speed roller conveyor, approx. 5 - 25 m/min - Drive via 0.37 kW gear motor, king shaft and PU round belts - Roller diameter: 50mm, roller length: 240mm with PVC coating - Transfer to cross conveyor by lifting/lowering of the roller conveyor - Roller covers according to HBG Isdpfx Aei Hmpiefzoib ----- Transport belt approx. 320mm x 3,500mm Base frame - Steel tubular frame, 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1,000mm) - Transport belt for wood lengths from 300mm to 4,200mm - Transport belt for wood widths up to 240mm - Transport belt with castors and brake Belt - Infinitely variable drive approx. 5 - 25 m/min - Drive via 0.37 kW gear motor - Belt PVC-coated, 260mm wide - Stops on both sides, approx. 15mm ----- Control system: - Plug-and-play with integrated control and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Fully installed with 16A Euronorm plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatics: 6-8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) as well as 2004/108/EC EMC Directive ----- Price of the above configuration ex works: on request! Plus packaging and transport costs ----- (Technical data as per manufacturer, subject to change!)