Odstraňovač lakovacej hmly

BERKMANN 3102 WW

Stav: použitý, číslo stroja/vozidla: 008319, Pracovný rozsah os X: 6380 mm Pracovný rozsah os Y: 1380 mm Pracovná plocha: S vákuovými konzolovými podperami Výkon hlavného vretena: 11 kW Dodpfox A Tc Ijx Alyout Počet riadených osí: 5 osí Počet pozícií nástrojov: 32

Stav: dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, vstupné napätie: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Machine in gantry design, with rack-and-pinion drive. The machine was most recently used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control: BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cups) A-axis: 540° (rotational axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y-axis 45 m/min, Z-axis 15 m/min, A/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, infinitely variable speed up to 17,000 rpm, milling spindle water-cooled. Duodpfxevmpx Re Alyot - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for fast positioning. - 2 control circuits for stops “raise / lower” - 2 control circuits for pneumatics “clamping / releasing” - 2 vacuum control circuits with push-button for clamping and automatic reset via CNC programming. - 2 stage separation devices, stroke approx. 320 mm. - Various clamping devices for posts and winders. - 1 chip conveyor integrated into the base frame for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump, including tank with 250-liter capacity for fast vacuum build-up. - approx. 20 vacuum supports with various suction pads. - 4 stops for raising/lowering to position workpieces. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / Repairs in 2018 / 2019: - Retrofit of rotary and swivel axes to new generation of digital drives. - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails replaced. - X-axis guide rail replaced. - Control retrofit to BWO Vektor 921, with V-CNC card, 256 MB NC memory. - New vacuum valves and hoses. - 2 x tool magazines + tool grippers overhauled. - Swiveling extraction system overhauled. Software: - It is possible to transfer a current version of the Compass stair design software. Compass is the leading provider for the planning and production of wooden staircases.

Stav: použitý, Rok výroby: 1973, číslo stroja/vozidla: 959, Horizontálna pásová píla Jllig TS 100 V, rok výroby 1973, výrobné číslo 959 Pracovná šírka max. 590 mm Náhradný pílový pás Plynulé nastavenie výšky pílového pásu Plynulý pohon s nastaviteľnými otáčkami Možnosť online video prehliadky cez Skype Vaša návšteva nás poteší – viac strojov na sklade Ihneď k dispozícii – možnosť obhliadky Dodpfx Alormul Sjyout Na sklade v Emskirchen / Norimberg – možnosť odskúšania

Stav: dobrý (použitý), Rok výroby: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for processing wood and plastics. Gantry-type machine with rack-and-pinion drive. Year of manufacture: 2005 Technical Data: CNC Control BWO 920 for 5-axis machining. 10.4" LCD display 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Dsdovr A A Tepfx Alyout Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) A-axis 540° (rotary axis), B-axis 196° (tilting axis +/- 98°) Rapid traverse speed X/Y-axis 45 m/min, Z-axis 24 m/min, A/B-axis 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, power 7.5 kW (S1) / 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine with 20 positions for tools up to D = 90 mm, up to max. 160 mm for sorted storage (three positions required). Machine Table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops ('Raise / Lower') - 2 x control circuits for guide rail ('Raise / Lower') - 2 x control circuits for pneumatic ('Clamp / Release') - 2 x vacuum control circuits with push-button clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame for removal of chips and small waste up to approx. 100 x 100 x 100 mm. Vacuum Supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with tank. - Vacuum supports with various suction cups. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work Safety: - Moving protective cabin with safety bumpers on operator side. Repairs / Maintenance prior to delivery: - New maintenance performed. - New lamella curtain at the gantry - New sliding window - New energy chain on Y-axis - New energy chain on Z-axis - Various cables and air hoses replaced.

Rok výroby: 2025, stav: nový, New machine Year of manufacture: 2025 Equipment and technical data: Supplied in standard configuration with: Robust, torsion-resistant steel frame in welded and bolted construction Lamellar pressing beam TOP with 6 elements, lamellar pressing beam SIDE with 5 elements Lamellar pressing beam with proven tolerance compensation (Ganner system) for tightly bonded carcass connections Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and running accuracy) and high-performance running nuts with grease reservoir Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) The pressing force of the pressing beams is infinitely electronically adjustable by 2 potentiometers and controlled by frequency inverters, making the pressing force control absolutely wear-free Pressing force for horizontal pressing beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and positioning speed of the pressing beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressing beams, e.g. for low pressing forces, drawers, and 45° carcasses Very simple operation using 6 separate push buttons, 8 movement sequences selectable via control unit Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams Dsdpew Nafkjfx Alyout Post-pressing function to increase or reduce pressing force during the pressing process Working/feeding height: 300 mm Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, sensors can be switched off for pressing of special components Including set of machine feet for working height of 500 mm Location: Flörsheim Availability: Short notice

Stav: použitý, Kompaktná suchá odsávacia stena Spänex TAW 215 Stena na odsávanie farebnej hmly so suchým odlučovačom Kompletné zariadenie pre prívod vzduchu Vykurovací register na teplú vodu Ovládanie striekacej miestnosti s dotykovou obrazovkou 2 x 2,0 kW výkon pohonu 6000 m³/h objemový prietok Rok výroby 2011 Z ukončenia prevádzky stolárskej dielne / odchod do dôchodku VO VEĽMI DOBROM STAVE Dusdpewlf E Aofx Alyot priamo zo stolárstva

Stav: veľmi dobrý (použitý), Predám zatĺkaciu dlabaciu stroj značky Ganner vo veľmi dobrom stave. Dsdoyyahnspfx Alyjut

Stav: takmer ako nový (použitý), Rok výroby: 2021, prevádzkové hodiny: 20 h, Funkcionalita: plne funkčný, Ganomat Selekta a korpusová lisovačka Ponúkame na predaj stroj Ganomat Selekta a korpusovú lisovačku. Obe stroje boli používané len niekoľko dní, takže sú vo veľmi dobrom, takmer novom stave. Lokalita: Bosna a Hercegovina V prípade záujmu o viac informácií alebo fotografií nás neváhajte kontaktovať. Dedow U Nxwspfx Alyeut

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse movement speed / adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints when pressing carcases and for drawer manufacturing. Brief overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless press force adjustment • Minimum pressing force: 300/500 daN (kg) for Concept Eco; minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco; maximum pressing force: 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable preselection of pressing time with automatic opening • Concept Eco: Extremely easy operation using 6 separate push buttons for 8 motion sequences • Concept Primus: Intuitive operation via LCD display Universal application: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with protruding tops • Drawers • Simultaneous pressing of multiple carcases or drawers Advantages: • Field-proven tolerance compensation (GANNOMAT System) • Electromechanical carcase press with frequency-controlled gear motors • Independently operating vertical and horizontal pressing beams • Long service life thanks to proven, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional Dedpjvxgrrefx Alyout • Easy operation thanks to user-friendly, practical control panel • Fast due to beam positioning speeds up to 50 mm/sec (option) • Efficient through precise pressing of various carcase sizes • Flexible due to adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a modern cabinet press

Stav: použitý, prevádzkové hodiny: 1 069 h, nosnosť: 4 000 kg, typ stožiara: duplex, typ prevodu: automatický, farba: oranžová, najazdené kilometre: 1 069 km, zavesenie: iný, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ochrana hlavy, Kontaktná osoba predaja: Frank Rau / Ruština / Angličtina / Nemčina - Bachar Ibrahim / Arabčina / Angličtina / Nemčina - Registrácia vozidla, technická/spojovacia/UVV kontrola, prevoz do prístavu Automatická prevodovka, zemný plyn, základná farba: oranžová Extra výbava Ochranná strecha, ochranná strecha, posilňovač riadenia Typ nástavby: BF 03-40, 4t plynový vysokozdvižný vozík, stav dobrý. Dedsn H Eq Sepfx Alysut Chyby vyhradené.