Obrábacie centrum

BIESSE ROVER A 1632

Stav: dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1000028154, Výbava: otáčky plynule nastaviteľné, Stroj bol uvedený do prevádzky v roku 2019, jediný majiteľ. Bol používaný veľmi málo. Popis Užitočná pracovná plocha, konfigurácia 5 osí: X=3280mm, Y=1600mm Nwjdpfx Afoxdl H Usksb Pohyby osí: X=3706 mm, Y=2294 mm, Z1=515 mm, Z2=371 mm Rýchlosť posuvu osí: X=80 m/min, Y=60 m/min, Z=30 m/min Elektrovreteno: HSD 5-osé 11 kW s nepretržitou rotáciou o 360° na osiach B a C, umožňuje veľmi presné opracovanie komplexných tvarov chladené kvapalinou Vŕtacia hlava: HSD 20 vertikálnych pinol 4 horizontálne drážkovacie kotúče na osi X drážkovacie kotúče na osi Y Pracovný stôl: 6 travers Isbjwhypnjni Itxtobb 4 prísavky na každej traverse príprava na uniclamp Zásobníky na náradie: revolverový zásobník so 16 pozíciami Vákuový systém: Vákuová pumpa s kapacitou 250 m³/h, zabezpečujúca pevné uchytenie obrobkov počas obrábania.

Stav: použitý, Rok výroby: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working range in X-axis: 3228 mm Working range in Y-axis: 1580 mm Working range in Z-axis: 200 mm with suction cups H74 mm Working range in Z-axis: 245 mm with suction cups H29 mm 8 adjustable ATS panel support bars Installation of pneumatic clamping, divided into two Y-zones 6 pneumatic Bakelite bars for panel lifting 3 adjustable suction cups for the bar Setup assistant for suction cups 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK taper connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage The independent Tesa boring spindles BH17 are arranged as follows: 5 independent spindles for vertical drilling in the X direction 5 independent spindles for vertical drilling in the Y direction 4 spindles for horizontal drilling in the X direction 2 spindles for horizontal drilling in the Y direction 1 saw blade integrated in the drilling head, diameter 120 mm (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressure system with double rubberized roller for spokes, Maximum inside diameter 30 mm and sensor for edge bonding – 500 ml glue pot mounted on the glue roller – edge pre-heating lamp – edge feed system – edge cutting system – manual edge feeding possible Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum workable inner radius with edge processing: 30 mm Maximum outer radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge * 30 mm with 3 mm edge Minimum dimension of edged panel: 300 x 300 mm Minimum inner diameter for edging: 350 mm with plastic edge thickness less than 1 mm and with panel maximum thickness 18 mm Edge magazine with 2 positions in safety enclosure for edges up to 65 mm maximum thickness Finished-component cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle 1 unit for rounding/chamfering edges 1 combined unit EF60A trimmer/scraper Perimeter safety fence Nwodpfsugpwnox Afkjb Chip extraction system with motorized conveyor belt Liquid cooling system Automatic lubrication system 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED