CNC drevoobrábacie centrum

CMS Avant

Stav: dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, vstupné napätie: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Machine in gantry design, with rack-and-pinion drive. The machine was most recently used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control: BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cups) A-axis: 540° (rotational axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y-axis 45 m/min, Z-axis 15 m/min, A/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, infinitely variable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for fast positioning. - 2 control circuits for stops “raise / lower” - 2 control circuits for pneumatics “clamping / releasing” - 2 vacuum control circuits with push-button for clamping and automatic reset via CNC programming. - 2 stage separation devices, stroke approx. 320 mm. - Various clamping devices for posts and winders. - 1 chip conveyor integrated into the base frame for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump, including tank with 250-liter capacity for fast vacuum build-up. - approx. 20 vacuum supports with various suction pads. - 4 stops for raising/lowering to position workpieces. Kdedpsvmpx Refx Afdew Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / Repairs in 2018 / 2019: - Retrofit of rotary and swivel axes to new generation of digital drives. - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails replaced. - X-axis guide rail replaced. - Control retrofit to BWO Vektor 921, with V-CNC card, 256 MB NC memory. - New vacuum valves and hoses. - 2 x tool magazines + tool grippers overhauled. - Swiveling extraction system overhauled. Software: - It is possible to transfer a current version of the Compass stair design software. Compass is the leading provider for the planning and production of wooden staircases.

Stav: dobrý (použitý), Rok výroby: 1998, Funkcionalita: plne funkčný, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis machining, ideal for aluminum processing and mold making. • MAKA ECM 27 R in gantry design. • Equipped with automatic central lubrication and electrical cabinet with air conditioning unit. • CNC control BWO 900C, 1 MB memory, in integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: With tool length 130 mm and diameter 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Kdjdpfx Afst Dl U Eodow Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B-axis: 10,000°/min. 1 milling spindle, 11 kW, Infinitely variable speed from 2,000 – 17,000 rpm, With ceramic bearings, liquid cooling. Tool holder SK 40 with automatic tool changer. 1 chain-type tool magazine for 12 tools up to Ø 160 mm, thereof 2 stations for angle drilling heads (fixed location coded), SK40. 1 steel flat table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m³/h, with 250-liter tank. 1 vacuum clamping system. Occupational safety: With safety enclosure for the rear of the machine, side access door, the enclosure is open at the top. Lamella curtain on operator side and safety bumper on table front. Repairs / Renewals prior to delivery: - Maintenance. Electrical ratings: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW The use of an RCD safety device in the machine supply line is not possible. Operating temperature: 10 – 35°C Pneumatics: 6 bar, approx. 10 m³/h Scope of delivery does not include tool holders or machining tools. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with production-ready handover!

Stav: dobrý (použitý), Rok výroby: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for processing wood and plastics. Gantry-type machine with rack-and-pinion drive. Year of manufacture: 2005 Technical Data: CNC Control BWO 920 for 5-axis machining. 10.4" LCD display 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) A-axis 540° (rotary axis), B-axis 196° (tilting axis +/- 98°) Rapid traverse speed X/Y-axis 45 m/min, Z-axis 24 m/min, A/B-axis 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, power 7.5 kW (S1) / 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine with 20 positions for tools up to D = 90 mm, up to max. 160 mm for sorted storage (three positions required). Machine Table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops ('Raise / Lower') - 2 x control circuits for guide rail ('Raise / Lower') - 2 x control circuits for pneumatic ('Clamp / Release') - 2 x vacuum control circuits with push-button clamping and automatic reset via CNC programming. Kdedpfx Asvr A A Tefdsw - 1 chip conveyor integrated in the base frame for removal of chips and small waste up to approx. 100 x 100 x 100 mm. Vacuum Supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with tank. - Vacuum supports with various suction cups. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work Safety: - Moving protective cabin with safety bumpers on operator side. Repairs / Maintenance prior to delivery: - New maintenance performed. - New lamella curtain at the gantry - New sliding window - New energy chain on Y-axis - New energy chain on Z-axis - Various cables and air hoses replaced.

Stav: dobrý (použitý), Rok výroby: 2001, Funkcionalita: plne funkčný, Used Machine MAKA PM 270 R 5-axis CNC machining center for processing wood, plastics, and aluminum. Machine with gantry design, featuring rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC Control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile operator panel stand. Working area in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-Axis: 5,600 mm X-Axis: 1,350 mm Z-Axis: 420 mm / with 180 mm fixture height (vacuum cups) Working area in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-Axis: 6,000 mm X-Axis: 1,350 mm Z-Axis: 420 mm / with 180 mm fixture height (vacuum cups) A-Axis 540° (rotary axis) B-Axis 200° (swivel axis +/- 100°) Rapid traverse speed X-/Y-Axis 45 m/min. Z-Axis 24 m/min. A-/B-Axis 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. power 12.5 kW, infinitely variable spindle speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - ISO 40 tool interface for automatic tool changer system. - 1 chain tool magazine with 32 tool positions for tools up to D = 90 mm, with organized slots up to max. 160 mm. (three slots required for this feature). Machine Table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for sliding rail "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with switch for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame, for removal of chips and small offcuts up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! On request, the system can be supplied including various tool holders. We will be happy to provide you with a separate offer. Vacuum Supply: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250-liter tank for rapid vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Stops raise / lower for component positioning. Miscellaneous: - Automatic central lubrication. - Control cabinet with air-conditioning unit. Kjdpjvmywqsfx Afdodw - Projection laser Occupational Safety: - Traveling safety cabin with safety bumpers on the operator side.

Stav: dobrý (použitý), Rok výroby: 2000, Maka MM 7 T / 5 osí, Rok výroby: 2000, Řídicí systém: Siemens 840 D, Pojízdná dráha X/Y/Z: 2x1500/2000/600 mm, Portálová frézka pro lehké obrábění, Frézovací vřeteno: 7,5 kW, NC frézovací hlava, A osa: 540°, B osa: +/- 100°, Kdedpfxswuy Ahe Afdjw Výměník nástrojů: 10 pozic, Upínání: HSK F 63, Pilový kotouč Ø max. 170 mm, Otáčky vřetena až 24 000 ot./min., Osy X/Y s pastorkem a hřebenem, Osa Z kuličkový šroub, Vakuový stůl, Hliníkový plochý stůl,

Rok výroby: 1999, Stav: pripravené na použitie (použité), Hlavný pohon Počet osí: 5 Doplnkové vybavenie Energetické reťaze: rôzne modely Toto 5-osé CNC obrábacie centrum na drevo MAKA FPM 470 bolo vyrobené v roku 1999. Je ideálne na náročné drevárske projekty a ponúka presnosť a flexibilitu. Ak hľadáte vysoko kvalitné možnosti frézovania, zvážte stroj MAKA FPM 470, ktorý máme na predaj. Pre viac informácií o tomto stroji nás kontaktujte. Kodpfxswpyc Rj Afdedw Oblasti použitia CNC obrábanie dreva

Rok výroby: 2013, Stav: pripravené na použitie (použité), Pojazd osí X/Y/Z: 2000 mm/1000 mm/650 mm, osi: 5, výkon vretena: 10 kW, otáčky: 27 000 ot./min, riadenie: Siemens Sinumerik 840 DSL, hmotnosť: cca 7000 kg. Obhliadka na mieste je možná. Kdodpfxeugmxio Afdsw

Stav: použitý, Rok výroby: 2005, 5-OSÉ OBRÁBACIE CENTRUM BALESTRINI MOD. IDEA GRANDE – V SÚLADE S CE – POUŽITÉ - Pojezdy osí: X: 1600 mm Y: 3000 mm Z: 700 mm A: neobmedzené C: 400° - Maximálne obrábateľné rozmery na dvoch stolech súčasne: 2800 x 1100 x 700 mm - Maximálne obrábateľné rozmery na jednom stole v striedavom cykle: 1300 x 1100 x 700 mm - Hlava LS 44 so 4 x 7,5 kW vzduchom chladenými elektromotormi Colombo - 18 000 ot./min. - 2 vákuové pumpy Becker 100 m³/h - CNC riadenie NUM - Dongle (USB kľúč) Alphacam - Kabína Kjdpfxjwrb S Eo Afdjdw - Rok výroby: 2005