Klimatická testovacia komora 5500 litrov (5,5 m³)

CTS CW-60/5,5 -60°C bis +100°C

Stav: veľmi dobrý (použitý), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climate test chamber enables functional or material property testing of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculating air volume ensures optimal transfer to the specimen. The air treatment unit is located at the rear of the interior. The refrigeration units are housed in a separate frame at the rear of the device and are easily accessible. The control system is installed in a dedicated control cabinet; the control panel is integrated into the cabinet door. The chamber is equipped with a self-regenerating compressed air dryer for dehumidification. Fresh air can be purged into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test item and radiant heat, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1% to ±3% RH over time Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, without test item, without radiant heat, and without additional equipment. Dimensions: Interior (Test/Usable Space): - Volume: approx. 5,500 litres (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External Dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic - Infinitely variable performance adjustment via electronic monitoring and control system - Environment-friendly refrigerants R 23 / R 404 A Godpex Eaxbefx Ab Ssbn Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier possible – cost and organization upon request - Scope of delivery: (see picture) - (Subject to changes and errors in technical data. All information is subject to change!) - For further questions, we are happy to assist you by phone.

Stav: použitý, Chladiaca/mraziaca komora Viessmann -Vonkajšie rozmery: 3300 x 2100 x 2450 mm -Vnútorné rozmery: 3100 x 1900 x 2250 mm -Hrúbka panelov: 100 mm -Svetlý priechod dverí: 800 mm -Podlaha z nehrdzavejúcej ocele -Nástenná chladiaca jednotka v cene Gjdpfx Aboxqpgrs Sebn -Stav skladu: 1 kus -Komora jednoducho montovateľná

Stav: veľmi dobrý (použitý), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test objects. Device Description The climate test cell allows testing of the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal transfer to the test specimen. The air treatment area is located at the rear of the interior chamber. Behind the unit, the aggregates are housed in a separate frame for easy access. The control panel is installed in a separate control cabinet, with the operator interface integrated into the cabinet door. The test chamber is equipped with a self-regenerating compressed air dryer for dehumidifying the test space. Fresh air can be introduced into the test chamber via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60°C to +100°C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured in supply air): Heating: 2 K/min from -40°C to +85°C Cooling: 2 K/min from +85°C to -40°C Climatic Tests: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data apply to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without additional equipment. Dimensions: Interior (test/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection possible by arrangement (46325 Borken) Gbodpfx Ajx D Abpsb Sen - Shipping by freight carrier available – costs & arrangements on request - Scope of delivery: (see image) (Subject to modifications and errors in technical data. All information without obligation!) Further questions can be answered by phone.

Stav: nový, číslo stroja/vozidla: 1900040028, dĺžka dopravného pásu: 1 700 mm, šírka dopravného pásu: 440 mm, rýchlosť dopravného pásu: 57 mm/s, výkon: 0,18 kW (0,24 k), vstupné napätie: 230 V, vstupná frekvencia: 50 Hz, Dopravník Voran 1.700 x 440 mm Godjtv E Diopfx Ab Sebn v souladu s FDA

Stav: ako nová (výstavný stroj), Rok výroby: 2025, lisovacia sila: 15 t, Hidralmac C-Frame Hydraulic Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic single-column combination press from Hidralmac with 15 t pressing force. This machine is configured as a manual special solution and is particularly suitable for flexible assembly, straightening, and pressing tasks in workshops and service environments. The work table can be swung out to the left. The lower base plate can be inserted in 3 different height positions. The ram can be manually lowered using the rotating cross handle. Special features of this press: The operator can build up very precise pressure from 0 to 1.5 t. This is especially important when pressing ball bearings, for example. We have supplied this press type multiple times to the aviation industry, where exact and careful operation is essential. After precise positioning, pressure up to 15 t can be built up using the hand pump. ##### Technical data & information: Assembly/Disassembly Press – 15 t – 270 × 600 mm ==== General Information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Pressing force: 0–15 t - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Table bore: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Weight: approx. 800 kg - Frame: welded steel construction - Table: swing-out - Sub-table: height adjustable (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via hand lever and hand pump - Fine metering: 0–1.5 t using rotary cross handle - Hand pump: 0.5 l - Pressure gauge: manometer ==== Controls - Operation: manual via hand lever and rotary cross handle - Pressure regulation: mechanically and finely adjustable ==== Safety - Anti-rotation device - Stable frame construction ##### Fields of Application: Press-in, press-out, assembly, disassembly, straightening, bearing technology, workshop operations, maintenance, precision assembly, service operations, small production batches hydraulic press, assembly press, disassembly press, workshop press, 15 t press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, press-in press, bearing press, industrial press Gjdpfxofhcc Ij Ab Sebn Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with every aspect of the Brazilian national safety guideline NR 12, upon which these are based. Our great strength lies in the construction of special purpose machines and press automation. We supply custom hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly use components from leading European manufacturers.

Stav: veľmi dobrý (použitý), Weiss Model: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control Cabinet Dimensions Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal Dimensions Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor Load: 30000 N/m² (surface load) Gbsdpovx Nfbofx Ab Sen Test Volume: approx. 27,000 litres Specimen Mass: 1000 kg Cooling / Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Consistency: ± 0.3 to 1.0 K (over time) Temperature Consistency: ± 0.1 to 0.5 K (over time) Climatic Operation: 10 to 90°C Humidity: 10...98% r.h. Temperature Consistency: ± 0.1 to 0.5 K (over time) Dew Point Range: +4°C to +84°C Power Supply: 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Fitted with additional floor plates to increase load capacity Important information for your safety as a buyer! The following actions are carried out in advance for our chambers offered: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors reserved!) We are happy to answer further questions by phone.

Stav: použitý, -Rozmery zvonka: 2600x2900x2110 mm -Rozmery vnútri: 2400x2700x1950 mm -Hrúbka stien: 80 mm -Teplota: -2 až +8 °C / -18 až -23 °C -Chladiaci plyn: R452A Gjdpfxox Eyhfs Ab Sobn -Klimatická trieda: 5 -Chladiaca jednotka predmontovaná na paneli -Automatické odparovanie kondenzovanej vody -Vnútorné osvetlenie -Panely s povrchovou úpravou z predlakovaného plechu špeciálne navrhnutého pre potravinárske využitie, farba svetlosivá -Modulárny systém panelov so šírkami 300, 600, 900 a 1200 mm -Panelový zámkový systém s dvojitým háčikom -Zaoblené dvere a vnútorné rohy zrezané v uhle 45° -Ergonomická kľučka so zámkom a núdzovým otváracím systémom -Tlaková vyrovnávacia klapka -Podlaha z nehrdzavejúcej ocele a protišmyková podlaha -Obojsmerné, samosvorné dvere v 90°, dostupné v 2 rozmeroch, so šírkou priechodu 600 a 700 mm -Pánty so sklonom -Polyuretánová izolácia bez CFC, vstrekovaná pod vysokým tlakom, hustota 41 kg/m³

Stav: použitý, Rok výroby: 2020, Two machines from year of manufacture 2020 (G5 i) and one machine from 2022 (G5) available. Includes hydraulic unit, oil cooler, and air dryer Initial commissioning of the 2020 machines took place in March/May 2022; the 2022 machine was commissioned in March 2023. The machining center can be used for grinding, milling, and drilling of metallic workpieces. It is equipped with an integrated dressing unit as standard. The machining center is used for hard grinding and boring of bores in discs and flanges for precision planetary gears. Machine Description Makino Model G5 i Grinder Universal Machining Center With creep feed grinding function Makino Professional 5 control system Machine Specifications (as per manufacturer) Travels Column X-axis: 520 mm Spindle Y-axis: 560 mm Table Z-axis: 600 mm Gsdpfx Aoywgh Nob Sobn Spindle center to pallet surface: 80 – 640 mm Spindle nose to pallet center: 70 – 670 mm Feed Rates Minimum increment: 0.001 mm Jog mode: 1 – 8,000 mm/min Machining feed: 1 – 48,000 mm/min Rapid traverse: 48 m/min Spindle Spindle taper: ISO 40 Spindle motor (high torque): 18.5 / 22 kW AC Speed range (2 steps): 50 – 12,000 rpm Automatic tool changer Machine weight 8,450 kg Controlled axes 5 axes simultaneous Special equipment for VIPER grinding Dressing unit Rotating dressing unit (quick-change) – electric, incl. holder (52 mm) Electrical interface for dresser Workpiece clamping Erowa ER-029392 Power Chuck Clamping/releasing control incl. pressure indicator Coolant preparation and supply Water-based coolant filtration system Transfer tank High-pressure pump Self-tilting chip container Coolant supply bridge Extraction system incl. pipework Makino interface for coolant system Makino interface for extraction system Coolant monitoring (pressure, flow, temperature) Programmable coolant nozzle (PCN) – through spindle, nozzle, base, and shower PCN nozzle assembly Miscellaneous Automatic workpiece measuring system (RMP600) Point Master unit (manual touch probe unit) Bench Master Air dryer Special I/O interface Machine anchoring kit FANUC warranty (2 years) C&F costs UK/Euro transformer High-speed rotary workpiece spindle (100 rpm) Time-delayed splash guard Oil lubrication system for ballscrew and linear guides Programmable coolant nozzle for grinding wheels (PCN) Reinforced splash guard door Automatic front door (AWC) with light curtain Signal lights (3-color) Halogen work light (1 piece) Safety lock package Optional Equipment Easy-Grind Max NC incl. HMI and Machine Manager Scale system for X, Y, Z axes (0.05 µm) Switch of display language from English to German Free rotation of rotary axes during operation Project management by NCMT and Melior Motion Easy-Grind Max+ (single station solution, customer-specific adaptation)

Stav: použitý, Rok výroby: 2017, pojazdová vzdialenosť osi X: 435 mm, zdvih osi Y: 465 mm, zdvih osi Z: 560 mm, hmotnosť obrobku (max.): 80 kg, celková výška: 2 755 mm, celková dĺžka: 3 360 mm, celková šírka: 3 870 mm, celková hmotnosť: 8 500 kg, nos vretienka: MAS BBT 40, Matsuura MX-330 - PC10 Vertikálne 5-osé obrábacie centrum CNC riadenie Matsuura G-Tech 31 i Veľkosť stola: ø 130 mm Zaťažiteľnosť stola: 80 kg Počet paliet: 10 Gedpfx Abey Ny Ake Sjbn Max. priemer obrobku x výška: 330 x 300 mm Posuv v osi X: 435 mm Posuv v osi Y: 465 mm Posuv v osi Z: 560 mm Osa C (otáčanie stola): 360° Osa A (naklonenie stola): -125/+10° Otáčky vretena: 50 – 15 000 ot/min Upínanie vretena: MAS BBT 40 Výkon motora vretena: 7,5/5,5 kW Kapacita zásobníka: 90 V prípade otázok ohľadom stroja nás neváhajte kontaktovať telefonicky alebo e-mailom. Pozrite si aj ďalšie naše inzeráty pre kompletný prehľad nášho skladového sortimentu.

Stav: veľmi dobrý (použitý), 298 POUŽITÝCH chladiacich a mraziacich boxov: LIEBHERR, GRAM a ďalšie. Gbjdpfx Abjyg Nm Sj Sjn Máme k dispozícii mnoho chladiacich boxov pre cukrárne, pekárne a obchody značiek: LIBHERR, GRAM a iné. Uvedená cena je bez DPH. HOVORÍME ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY, UKRAJINSKY. V našich skladoch máme veľký počet pekárskych pecí: etážové, rotačné, plynové, olejové, elektrické, rôznych značiek. Ponúkame aj stroje, pekárske zariadenia, linky na žemle, linky na chlieb. Ak chcete vidieť našu kompletnú a aktuálnu ponuku, navštívte náš profil Bakeres.