Automatická píla na hliník

Eisele VA-L-560/600

Stav: veľmi dobrý (použitý), Rok výroby: 2014, dĺžka sústruženia: 700 mm, pojazdová vzdialenosť osi X: 205 mm, zdvih osi Z: 700 mm, výkon motora vretena: 22 000 W, celková výška: 2 800 mm, celková dĺžka: 6 000 mm, celková šírka: 3 900 mm, celková hmotnosť: 9 800 kg, Complete machining with dual spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration unit with pressure tank Max. turning diameter: 400 mm Pjdpfxsyn Em Rs Alcorb X-axis travel: 205 mm Z-axis travel: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Sub-spindle speed: 6000 rpm Sub-spindle through bore: 62 mm Sub-spindle power: 15 kW Tool changer: 16 Driven tool speed: 6000 rpm Lower turret positions: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. While the information is provided in good faith, we cannot guarantee its accuracy. Accordingly, no representation or contractual terms are constituted. We recommend verifying all critical details.

Stav: generálne opravený (použitý), Rok výroby: 2014, Funkcionalita: plne funkčný, celková šírka: 2 500 mm, celková dĺžka: 4 500 mm, celková výška: 3 200 mm, For sale is a double-spindle pick-up lathe EMAG VSC 250 DUO. Two nearly identical machines of this type are available. Each machine is equipped with two independent work spindles and two EMAG turrets. The machine allows you to either produce two identical parts with the same machining operation or manufacture a single part in two successive machining steps. The VSC 250 DUO will be fully overhauled before delivery and upgraded to a Siemens Sinumerik ONE CNC control. Depending on your requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens Sinumerik ONE TECHNICAL DATA Max. workpiece diameter: 250 mm Max. workpiece height: 150 mm Chuck diameter: 250 / 315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disk turret, 12x VDI 50, without driven tools Work area 2: 1x EMAG disk turret, 12x VDI 50, with driven tools Podpfx Aor Nc Ufolcjrb Price, delivery time, and machine configuration upon request.

Stav: generálne opravený (použitý), Rok výroby: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Max. saw blade diameter: 500 mm Motor power: 4.0 kW Saw blade feed: 0-40 mm/s, infinitely adjustable Electronic saw height control Working area, square at 90° max.: 130 x 130 mm Working area, flat at 90° max.: 190 x 130 mm Working area, round at 90° max.: 170 mm The machine has been completely overhauled in our workshop and is in like-new condition. Among other things, the following work was performed: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Retrofit to pusher with servo control New electrical components New pneumatic lines New pneumatic components Pjdsuiy Ngjpfx Alcjrb Conversion to valve terminal Extraction performance optimized New minimal quantity lubrication system Replacement of general wear and tear parts Overhaul of the enclosure The machine is additionally equipped with: Minimal quantity lubrication Spacer extension (for high-quality cut surfaces without return marks) Preload magazine for careful handling of painted/anodized surfaces Scrap piece ejection integrated in the pusher Folding scrap piece tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of multiple workpieces Online support connection Delivery and installation at your facility Staff training

Stav: nový, Load capacity 500 kg Number of suction pads: 6 units Prsdpoxak Ddofx Alcsb Diameter of suction pads: 215 mm Suction capacity: 8.0 m³/h Crane eye diameter: 80.0 mm Voltage: 400 V Total power requirement: 0.18 kW Machine weight approx. 120 kg Required space approx. 2400 x 1100 x 584 mm Features: - For horizontal transport of smooth, dry, and airtight panels - Robust load-bearing structure made of steel - Painted in RAL 2000 with low dead weight - Galvanized main beam, length 2,400 mm - 3x galvanized cross beams, each 1,000 mm long - 6x spring-mounted, articulated, and adjustable suction cup holders - 6x suction cups, Ø 215 mm - Low-maintenance, high-quality dry-running rotary vane vacuum pump - With a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Telescopic operator handle extendable to 1,000 mm from the beam center - Stable sheet metal pocket for your crane controls - Operation “Suction / Release” via manual slide valve - Control and safety system for vacuum lifter * Robust control cabinet * Contactor circuit for vacuum pump * Safety warning unit with acoustic signal * Vacuum gauge with danger zone display * Large vacuum storage tank with safety check valve * Two-step operation for releasing the load - Fine dust filter to protect the vacuum pump - Documentation included * Special accessories included: - 6x ball valves for individually switching off each suction pad * For lifting smaller formats without needing to reposition suction pads or beams - Spiral connection cable, small coil * Extendable up to 3,500 mm, version as extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device

Rok výroby: 1962, stav: dobrý (použitý), číslo stroja/vozidla: 1083, Rovnací stroj - vertikální Výrobce: Rausch Typ: RS10/915 Výrobní číslo: 1083 Pedpfx Ajfc T Eujlcorb Rok výroby: 1962 Tažná síla: 10 tun Zdvih: 915 mm Systém DIN 1415 S plošinou pro nadpodlažní instalaci

Stav: použitý, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Pedsuz If Nspfx Alcsrb Tool bore diameter: 70 mm (nominal diameter) Clamping length/tool length: max. 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swivelling roll spindle for through-feed thread rolling - Four-stage roll spindle speed adjustment via gearbox - Hydraulic unit integrated in machine bed - Operating manual with electrical diagram Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, which have the same pitch as the workpiece, form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length is equal to the width of the thread dies. Through-feed rolling: Used when the thread length is greater than the thread die width. Through-feed dies have three sections – the entry, calibration, and exit zones. Knurling rolls have no pitch and are set at the helix angle of the profile to be rolled. Helical rolls differ from knurling rolls in that their profile includes a pitch. The sum of the pitch angle and the swivel angle results in the helix angle of the workpiece.

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, celková dĺžka: 30 000 mm, celková výška: 4 300 mm, celková šírka: 6 500 mm, hmotnosť obrobku (max.): 100 kg, teplota: 220 °C, vykurovací výkon: 80 kW (108,77 k), výška obrobku (max.): 1 200 mm, dĺžka obrobku (max.): 2 500 mm, izolačný materiál: Mineralwolle 75 kg/m³, hrúbka izolácie: 150 mm, šírka obrobku (max.): 800 mm, Výbava: osvetlenie, Plne automatizovaná linka na práškové lakovanie (systém s taktovacím dopravníkom, predúprava, lakovanie Wagner, pece) Na predaj je profesionálna, plne automatizovaná linka na práškové lakovanie ako kontinuálna linka (taktovací systém) od obchodného zástupcu Klaus Benecke. Linka je ideálna na efektívne lakovanie hliníkových dielov, ako aj ďalších kovových súčiastok. Individuálne prispôsobenie linky je možné na základe požiadavky! Hlavné výhody a kľúčové komponenty: - Chemická predúprava: 2-stupňová striekacia komora (D = 3 600 mm, Š = 1 500 mm, V = 2 250 mm) vrátane odmasťovania/fosfatovania a oplachovacej zóny so striekacím ramenom. - Sušiaca pec: Kontinuálna pec do 120 °C so 40 kW plynovým horákom na LPG (Riello). (možné aj iné zdroje energie) Predjum Uflopfx Alcsb - Lakovacia kabína PVC 3 600: Antistatická plastová kabína s monocyklónom (odsávacia kapacita 12 000 m³/h) a dodatočným filtrom. - Wagner Premium – aplikačná technológia: 2 zdvíhacie zariadenia, 6 automatických striekacích pištolí PEA-C4, 2 ručné striekacie pištole a riadiaca jednotka, navrhnutá pre až 10 pištolí. - Pece na vypaľovanie: Kontinuálna pec do 220 °C so 80 kW plynovým horákom na LPG (Riello). (možné aj iné zdroje energie) - Dopravná technológia: Reťazový dopravník Cardin C-100 v taktovacom režime (50 m dopravná dráha, 54 m reťaz). - Riadenie: Moderná PLC riadiaca jednotka so 7-palcovým farebným displejom (Easy View), meničom a modemom pre diaľkovú údržbu. Technické údaje: - Typ linky: Linka na práškové lakovanie (kontinuálna / taktovací systém) - Max. rozmery obrobku: (D x Š x V) 2 500 x 800 x 1 200 [mm] - Max. zaťaženie na nosič: 100 kg/nosník - Odhadovaná prietoková kapacita: približne 50 m²/h (obojstranne) - Materiál: hliník / kovové diely - Dopravný pás: Reťaz Cardin C-100 (50 m) - Výkon horáka: Sušiareň / pec 40 kW / 80 kW (LPG plyn alebo iný zdroj energie na požiadanie) - Riadenie: PLC so 7-palcovou dotykovou obrazovkou - Stav: Nová linka / projekt Komponenty v rozsahu dodávky: - Chemická predúprava (2-stupňová striekacia komora) - Sušiaca pec - Systém práškového lakovania (PCB 3 600) - Aplikačná technológia Wagner - Pec na vypaľovanie práškových lakov - Dopravná technológia - Elektrické riadenie - Služby a príslušenstvo

Stav: použitý, Rok výroby: 1996, Pressure 80 t Outreach 320 mm Stroke 6 - 118 mm Strokes per minute 30 - 80 Ram adjustment 70 mm Table surface 830 x 610 mm Ram surface 650 x 400 mm Frame gap (to the rear) 630 mm Total power requirement kW Machine weight approx. 8.1 t Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for through-hole - stepless speed control via frequency inverter Pjdotycdkopfx Alcsrb - The machine is technically inspected and overhauled in our workshop and will be equipped with a new control cabinet featuring safety controls and touchscreen - Current UVV inspection with brake time measurement

Stav: použitý, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle speed: 18,000 [rpm] - Spindle motor power: 25 [kW] LINEAR AXES - Travel X/Y/Z axes: 760 / 510 / 520 [mm] - Rapid traverse speed (X/Y/Z): 45 / 45 / 40 [m/min] SWIVEL AXIS A - Travel: -110 / +30 [degrees] SWIVEL AXIS C - Travel: 360 [degrees] - Rapid traverse speed: 25 [rpm] TOOL CHANGER - Tool changer type: Bras loader - Number of tools in magazine: 40 TABLE - Table size: Ø248 [mm] - Max. table load: 200 [kg] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 48 [kVA] WEIGHT AND DIMENSIONS - Required space: 3,940 x 4,060 [mm] - Machine height: 2,865 [mm] - Machine weight: 6,000 [kg] ACCESSORIES - Control unit: Hurco WinMax / MAX5 - Teach-in programming - Electronic handwheel - Coolant tank * with high-pressure pump - Through spindle coolant supply (IKZ) - Chip conveyor Pjdpfx Alsy Tzctscorb - Spindle cooling

Stav: použitý, Pressure 55 t Outreach 250 mm Stroke 10-90 mm Table size 640 x 495 mm Stroke rate 120 strokes/min Ram adjustment 55 mm Ram surface 290 x 210 mm Ram bore 40 H7 mm Drop-through opening in table 220 x 190 mm T-slots 22 mm Clamping plate 620 x 485 x 65 mm Total power requirement 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m Prodpfx Aecp Apyslcjb - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Electrically adjustable table height - Mechanical overload protection in the ram (shear pin) - Control cabinet with touchscreen - Foot switch