Stredový sústruh
EMCO EMCOMAT-17 D

Name: EMCO EMCOMAT-17 D
Brand: EMCO
Availability: InStock

Stav

Použitý

Umiestnenie

Aurach

Zobraziť mapu

Údaje o stroji

Popis stroja:: Stredový sústruh

Výrobca:: EMCO

Model:: EMCOMAT-17 D

Stav:: veľmi dobrý (použitý)

Cena a lokalita

Umiestnenie:: Steinauer Weg 2a, 91589 Aurach, Deutschland

Volať

Podrobnosti ponuky

ID záznamu:: A20576150

Naposledy aktualizované:: dňa 12.12.2025

Popis

EMCO Precision Lathe EMCOMAT 17 D

Incl. EMCO 3-axis digital readout

Year 2007 with CE certification
Fpsdpfjxx S R Aex Afmeb

2 units available!

Centre distance: 700 mm
Centre height: 170 mm
Swing diameter over bed: ø 340 mm
Swing diameter over cross slide: ø 190 mm
Bed width: 260 mm
Longitudinal slide travel: 600 mm
Cross slide travel: 220 mm
Top slide travel: 110 mm
Cross slide length: 410 mm
Cross slide width: 150 mm
Bed slide guide length: 380 mm
Tool shank cross section: 20 x 20 mm
Distance spindle centre to top slide: 34 mm
Top slide swivel range (compound): 60 / 120°

Main spindle:

Spindle mount: DIN 55029 (Camlock)
Spindle bore: ø 50 mm
Internal taper: DIN 7178 1:22
Spindle diameter in front bearing: ø 70 mm
Max. chuck diameter: ø 200 mm
Max. faceplate diameter: ø 200 mm
Spindle speed range: 40 - 3000 rpm
Infinitely variable speed control
4 mechanical speed ranges

Main drive:

Power at 40% duty cycle: 5.3 kW
Max. rated torque at main spindle: 640 Nm

Feed:

20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev
20 (28) cross feeds X: 0.023–0.406 mm/rev

Threads:

20 (28) metric threads (standard equipment): 0.4–7.0 mm

Tailstock:

Quill diameter: ø 50 mm
Quill taper: MT 3
Quill travel: 120 mm
Lateral adjustment: ±13 mm
Permissible workpiece weight (between centres): 50 kg, supported by tailstock: 150 kg

Weight: 755 kg
Dimensions: 1650 x 1060 x 1635 mm

The EMCOMAT 17 D is a precision lathe for all areas of mechanical engineering and for training purposes.

Equipment:

EMCO 3-axis digital readout with colour display
Potentiometer, EMERGENCY STOP button, speed digital display at the control panel next to the DRO
3-jaw chuck
MULTIFIX tool post size B
Electrically interlocked chuck guard
Rapid-action collet closer
MICROJET coolant spray system
Chip guard/rear wall
Machine lamp
Machine feet
Bed stop

Condition: Very good, from training operation

"Due to its quality and price, this machine is not suitable for private individuals."

Available from March 2026.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.

Poskytovateľ

Registrované od: 2021

17 Inzeráty online

Volať

Odoslať žiadosť

Telefón & Fax

+49 9804 ... inzercie

Tieto inzeráty by vás mohli tiež zaujímať.

Malý inzerát

Ubstadt-Weiher

811 km

Stredový sústruh
EmcoEMCOMAT-17 D

14 500 €

Počiatočná cena bez DPH

Volať

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Emcomat 17D lead and feed screw lathe with 3-axis digital readout by K&C, like new from training workshop, excellent condition!!! Technical Data: >> Year of manufacture approx. 2000, Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (L x D x H): approx. 1.6 x 0.9 x 1.3 m >> Weight: approx. 730 kg Accessories and equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty inc. user manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter mode, rapid zeroing, counting direction reversal >> 1 new 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolpost with 2 holders >> Chip guard/back panel >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in very good condition. This Emco is equipped with a brand new K&C 3-axis digital readout and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Fodpfxjwvuf Ts Afmopb

Zobraziť podrobnosti

Malý inzerát

Soerendonk

1 051 km

Dvojvretenová frézka
PTPVPU 1

1 600 €

pevná cena bez DPH

Volať

Stav: použitý, PTP VPU 1 Konvenčná frézka Rozmery stola: 260x1000 mm Kónus: 40 mm Os X: 500 mm Fpodpfxerzbkto Afmob Os Y: 300 mm Os Z: 400 mm Rozmery: 170x130x145 mm Variabilné otáčky Možnosť použitia vertikálne aj horizontálne Prívod napájania Hlava nastaviteľná v stupňoch S chladiacim čerpadlom Lokalita: Hamont-Achel, Belgicko Pre viac informácií volajte alebo napíšte email Pozrite si aj naše ďalšie inzeráty Po celý rok máme záujem o priemyselné stroje. Ak vlastníte prebytočné stroje, pošlite nám ich s fotografiami a informáciami e-mailom.

Zobraziť podrobnosti

Aukcia

Bayern

676 km

Stredový sústruh
EMCOemcoMAT-17D

Podrobnosti

Stav: takmer ako nový (použitý), Rok výroby: 2019, prevádzkové hodiny: 720 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: D4D194801, sústružnícky priemer nad priečnym suportom: 190 mm, otvor vretena: 50 mm, sústružnícky priemer nad lôžkom suportu: 340 mm, výška stredu: 170 mm, maximálna rýchlosť vretena: 3 000 ot./min, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: 340 mm Fsdpsv Iqm Sefx Afmopb Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Toolholder cross section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 – 3,000 rpm Speed control: stepless Number of speed ranges: 4 Speed ranges: 40 – 130, 110 – 360, 310 – 1,070, 870 – 3,000 rpm Feed range Longitudinal feeds: 0.045 – 0.787 mm/rev Cross slide feeds: 0.023 – 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 – 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MK 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centres: 50 kg With tailstock support: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Centre height above floor: 1,103 mm Total weight: 755 kg Power supply: 400 – 440 V EQUIPMENT - 3-axis digital readout - Stepless speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change toolholders B25/120 - Tool set - Fixed centre MK 5 - Turning tool set with parting-off tool (3 x standard, 1 x parting-off)

Zobraziť podrobnosti

Aukcia

Bayern

676 km

Stredový sústruh
EMCOemcoMAT-17D

Podrobnosti

Stav: takmer ako nový (použitý), Rok výroby: 2021, prevádzkové hodiny: 470 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: D4D210301, sústružnícky priemer nad priečnym suportom: 190 mm, otvor vretena: 50 mm, sústružnícky priemer nad lôžkom suportu: 340 mm, výška stredu: 170 mm, maximálna rýchlosť vretena: 3 000 ot./min, The machine was used for training purposes and has only approx. 460 spindle hours. Fpodpfx Aov Iqlzjfmeb TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool shank cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill travel: 120 mm Lateral adjustment: ±13 mm Permissible Workpiece Weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool kit - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting tool)

Zobraziť podrobnosti

Malý inzerát

Doetinchem

1 021 km

Nástrojová brúska
JungnerUS 450

Volať

Malý inzerát

Pásovej píly - horizontálne BERG & SCHMID DGS 350/450 HA-I Easy 34

Nemecko

718 km

Pásovej píly - horizontálne
BERG & SCHMIDDGS 350/450 HA-I Easy 34

Volať

Stav: nový, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw band width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirement: approx. 1.4 x 2.0 x 2.2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Miter cuts left & right up to 60°, without converting the machine · 34 mm saw band width · Large material support rotary table, ball bearing mounted · Saw band guides adjustable via extra wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates Fodofgyicopfx Afmopb · Infeed and outfeed roller · Removable chip tray (for cleaning) · Stand-alone control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed rate control · Fully hydraulic vise · Super-fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation sequence: 1. Clamp material 2. Start saw 3. Rapid descent to material start, or for serial cuts begin cutting immediately 4. Saw band off 5. Raise frame to just above material 6. Open vise Optimal, material-independent cutting results via fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switches with pictograms, simple and clear to operate

Zobraziť podrobnosti

Malý inzerát

Isernhagen

817 km

Sústruh
KAMI/SHEMDKM 500SC X 1000 mm

Volať

Stav: nový, Rok výroby: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Fedpfx Asd I A Dhsfmjpb Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2500 x 1100 x 1380 mm

Zobraziť podrobnosti

Malý inzerát

Obrábacie centrum - vertikálne MORI SEIKI NV 4000 DCG

Nemecko

912 km

Obrábacie centrum - vertikálne
MORI SEIKINV 4000 DCG

Volať

Stav: použitý, Rok výroby: 2006, x-axis travel: 600 mm y-axis travel: 400 mm z-axis travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Maximum table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Maximum torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse x/y/z: 20,000 mm/min Feed rate: 1 - 20,000 mm/min Incremental feed rate: 15 steps / 0 - 1,260 mm/min Number of tool magazine positions: 40 Maximum tool width: 80 mm Maximum tool diameter with adjacent pockets empty: 125 mm Fpodpov Az Ucsfx Afmsb Maximum tool length: 250 mm Maximum tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space required approx.: 2.8 x 3.0 x 2.9 m Vertical Machining Center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Zobraziť podrobnosti

Malý inzerát

Stredový sústruh a vretenový sústruh PINACHO SC 200-42-1000

Nemecko

604 km

Stredový sústruh a vretenový sústruh
PINACHOSC 200-42-1000

Volať

Stav: použitý, Rok výroby: 2016, Technické detaily: Maximálny priemer sústruženia nad lôžkom: 402 mm Maximálny priemer sústruženia nad suportom: 245 mm Sústružnícka dĺžka: 1000 mm Vzdialenosť medzi hrotmi: 1000 mm Výška hrotu: 200 mm Fedpfx Aovav Sdsfmjpb Obežný priemer v výreze: 560 mm Šírka výrezu: 120 mm Otáčky vretena: 40 - 345 / 345 - 1015 / 1015 - 2800 ot./min Posuv: pozdĺžny: 0,05 - 0,752 mm/ot + priečny: 0,025 - 0,376 mm/ot Priemer vretena: Ø 42 mm Upínanie pinoly koníka ISO: MK4 Zdvih pinoly koníka: 180 mm Celkový príkon: 4,1 kW Hmotnosť stroja cca: 1,2 t Rozmery stroja (DxŠxV): cca 2,4 x 1,0 x 1,7 m Sústruh nemá rýchloposuv. Polohovanie v 2 osiach Zobrazovanie pomocou Pinacho Lathe Controller Rýchloupínací systém Multifix s nožom na sústruženie Chladiace zariadenie Nožný pedál Možnosť rezania závitov (metrický, Whitworth, modulový, inchový závit)

Zobraziť podrobnosti

Malý inzerát