Stredový sústruh

EMCO emcoMAT-17D

Stav: veľmi dobrý (použitý), EMCO Precision Lathe EMCOMAT 17 D Including EMCO 3-axis digital readout Year of manufacture: 2007 with CE marking 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: ø 340 mm Swing diameter over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Saddle guideway length: 380 mm Tool shank cross section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound rest) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper according to DIN 7178 1 : 22 Front bearing spindle diameter: ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard) 0.4 - 7.0 mm Tailstock: Prodpfx Asxx S R Asfpjd Quill diameter: ø 50 mm Quill internal taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights: 50 kg (between centres), 150 kg (with tailstock support) Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all fields of mechanical engineering and for training purposes. Equipment: EMCO 3-axis digital readout with colour display Potentiometer, EMERGENCY STOP button, digital speed display on the control panel next to the DRO 3-jaw chuck MULTIFIX quick-change toolpost size B Electrically interlocked chuck guard Quick-change collet clamping device MICROJET coolant spray system Chip guard at rear Machine light Machine mounts Bed stop Condition: Very good, from training facility Available from March 2026

Stav: nový, Machine according to DIN 8605: Lathe with increased precision. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Tool shank size: 20x20 mm Distance from spindle center to top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper as per DIN 7178: 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40–3000 rpm Speed control: Stepless Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Thread cutting: 20 (28) metric threads (standard equipment): 0.4 – 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 – 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 – 3.5 32 DP threads (with optional gear set D3Z200): 112 – 8 Tailstock: Quill diameter: Ø 50 mm Quill taper: Morse Taper 3 (MT3) Quill stroke: 120 mm Pjdpfxjdctnbs Afpord Lateral adjustment: ± 13 mm Permissible workpiece weights Between centers: 50 kg Supported by tailstock: 150 kg Additional standard equipment: Including machine base and integrated 3-axis digital readout, German language, with color display 1 longitudinal stop 1 dead center, taper 1:22, DIN 7178 1 dead center MT3 1 tommy bar 1 drive plate segment 1 grease gun 3 hexagon bolts M16x60 – DIN 933 3 hexagon nuts M16-8 DIN 934 1 single tool holder 1 wrench A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electrical cabinet key 1 operating manual incl. spare parts list 1 electrical documentation 1 test certificate Packaging (for truck transport with pallet and plastic cover) Machine according to CE Attention: Images may depict special equipment/accessories!

Stav: pripravené na použitie (použité), Rok výroby: 2007, sústružnícky priemer nad priečnym suportom: 190 mm, dĺžka sústruženia: 700 mm, sústružnícky priemer: 340 mm, otvor vretena: 50 mm, Emco EMCOMAT-17D Psdpfexc H Dfox Afperd Vzdialenosť medzi hrotmi: 700 mm Priemer sústruženia nad ložom: 340 mm Priemer sústruženia nad suportom: 190 mm Ijbabexc H Dfjynxdsbb Priechod vretena: 50 mm Otáčky: 35–3000 ot/min Plynulo nastaviteľné otáčky medzi rozsahmi. Vybavený pozdĺžnym a priečnym posuvom. Dvojosý digitálny odpočet na osiach X a Z. Rýchloupínací držiak nástrojov Multifix.

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, otvor vretena: 50 mm, Sústruh EMCO EMCOMAT 17D, ex školské použitie, vo veľmi dobrom stave. Špecifikácie: - Rok výroby: 2006 - Priemer sústruženia nad lôžkom: 340 mm - Priemer sústruženia nad priečnym suportom: 190 mm - Vzdialenosť medzi hrotmi: 700 mm - Otáčky: 40-3000 ot./min, variabilné v 4 stupňoch - Priemer vŕtania hlavného vretena: 50 mm Príslušenstvo: - 3-čeľusťové skľučovadlo s vnútornými a vonkajšími čeľusťami - 3-osé digitálne odmeriavanie Psdpfx Afju N Dpmspsrd - Elektrická schéma - Multifix držiak nožov s 3 držiakmi - Chladiace zariadenie - Strojové osvetlenie - Otočný hrot - Pozdĺžny doraz lôžka - Strojové nohy

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Emcomat 17D lead and feed screw lathe with 3-axis digital readout by K&C, like new from training workshop, excellent condition!!! Technical Data: >> Year of manufacture approx. 2000, Machine No. D3F H1 010 Predpfx Ajwvuf Tjfped >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (L x D x H): approx. 1.6 x 0.9 x 1.3 m >> Weight: approx. 730 kg Accessories and equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty inc. user manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter mode, rapid zeroing, counting direction reversal >> 1 new 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolpost with 2 holders >> Chip guard/back panel >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in very good condition. This Emco is equipped with a brand new K&C 3-axis digital readout and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: takmer ako nový (použitý), Rok výroby: 2021, prevádzkové hodiny: 470 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: D4D210301, sústružnícky priemer nad priečnym suportom: 190 mm, otvor vretena: 50 mm, sústružnícky priemer nad lôžkom suportu: 340 mm, výška stredu: 170 mm, maximálna rýchlosť vretena: 3 000 ot./min, The machine was used for training purposes and has only approx. 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool shank cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill travel: 120 mm Lateral adjustment: ±13 mm Permissible Workpiece Weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool kit Prsdpfx Aov Iqlzjfpsd - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting tool)

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, otvor vretena: 50 mm, výška stredu: 170 mm, celková dĺžka: 1 650 mm, celková šírka: 1 060 mm, celková výška: 1 635 mm, maximálna rýchlosť vretena: 3 000 ot./min, otáčky vretena (min.): 40 ot./min, otáčky (max.): 3 000 ot./min, otáčky (min.): 40 ot./min, celková hmotnosť: 755 kg, priemer trojčeľustového skľučovadla: 200 mm, Výbava: otáčky plynule nastaviteľné, Nový stroj ihned k dispozici z našeho skladu ve Stuttgartu. (Mezitimní prodej vyhrazen) Ať už se jedná o stavbu prototypů, údržbu nebo především o školení – konvenční a cyklem řízené stroje EMCO zde vytvářejí most a nabízejí nejvyšší přesnost na malém prostoru a flexibilitu v každém detailu. Od volitelného příslušenství až po organizaci instalace – rádi Vám poradíme. Přehled hlavních předností EMCOMAT 17D: - Hlavní vřeteno dle DIN55029 - Koník (možnost excentrického nastavení) - Držák na jeden nástroj (s upínacím drápem) - Řemenový pohon pro posuvovou převodovku - Kryt sklíčidla s elektrickým koncovým spínačem - Volitelná výbava jako zařízení na chlazení, posuvné dveře proti třískám atd. Pracovní rozsah: - Pojezd v ose X/Y/Z: 220 / - / 710 mm Podjdq Rb Aepfx Afpsrd - Vzdálenost mezi hroty: 700 mm - Výška hrotu: 170 mm Hlavní vřeteno: - Maximální otáčky: 3000 ot./min - Připojení vřetena: Velikost 5 (DIN 55029) - Maximální výkon pohonu: 5,3 kW Koník: - Vnitřní kužel: MK3 - Výsuv pinoly: 120 mm - Vnitřní kužel pinoly: 50 mm Stroj je možné si prohlédnout ve Stuttgartu.