Mobilné dymové filtre na zváranie

Fischer EMK-1602

Rok výroby: 2025, Stav: nový, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. Further details can be discussed after testing with your material. Our granulators are used for shredding a wide range of materials such as plastics or wood. Shredders and granulators are ideal for a variety of size reduction applications. For example, injection moulding machines generate reject parts and sprues that need to be recycled. In blow moulding, in addition to reject parts, there are also flash waste or start-up purges. Suitable for processing blow-moulding plastics such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Ksdpfod N Dn Djx Afdjdw Material is fed from above into the grinding chamber via a hopper. The rotor inside is equipped with cutting knives. Material is reduced in size between the rotating knives and the stationary knives in the grinding chamber housing until it falls as defined regrind through a screen located beneath the rotor. *Option: The granulate is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the granulation system as shown in image 1. - Fan, cyclone, and filters are optional extras. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Granulation of PE 1000 plastic Initial material: approx. 40 mm chip length Secondary size reduction down to approx. 6 mm Throughput up to 50 kg/h using a 6 mm screen (Throughput up to 80 kg/h using an 8 mm screen) In G 30 wood chip secondary size reduction, significantly higher throughput rates can be achieved. Up to a maximum of 400 kg/h with a 10 mm screen. *with metered infeed, e.g. by conveyor or auger screw Details after test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm long 4 stator knives, each 225 mm long Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction nozzle: 100 mm Screens: 6, 8, and 15 mm – other sizes available on request Price per screen: €390 Replacement knife set: €679 Suitable for, for example: - Plastic waste of all kinds Various materials – HDPE, LDPE, PP, PS. PC, PA - Biomass - Wood - Herbs etc. Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Opening: 620 x 400 mm Special net price: from €24,995 net *Optionally available with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Opening: 620 x 500 mm Special net price: from €29,795 net *Optionally available with matching extraction/transport system --- For the correct configuration of the machine, the following information is important: - Length x width x height of the input material? - Screen size, to how many mm should the material be reduced? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos can also be helpful.

Stav: nový, Rok výroby: 2020, Typ: S 120 l Celonerezové prevedenie Objem zásobníka: 120 litrov Jeden pracovný hriadeľ Otočenie hriadeľa v oboch smeroch Kedpfx Ajf S A Ivsfdodw Ochranný kryt Elektrický príkon: 3 kW Napätie: 220 V / 50 Hz Inštalačné rozmery stroja v cm: Šírka: 91 Dĺžka: 65 Výška: 87 Dodacia lehota: po prijatí zálohovej platby, jeden pracovný deň

Rok výroby: 2022, Stav: nový, číslo stroja/vozidla: RPM500_OSZ2, Robotická leštička RPM500_OSZ2 s oscilačnou funkciou (50 mm) a posuvom (100 mm). Leštiace kotúče priemeru 1000 mm. Výkon pohonu 4 kW. Odsávacie príruby 100 mm. K dispozícii sú dva kusy. Kdsdsd Dt D Iopfx Afdew

Stav: nový, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate weight: 2,400 kg Total power requirement: 4 kW Pre-bending: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roller diameter: 170 mm Equipment • 3 rollers Kedpfsd Ab Haox Afdsdw • Asymmetrical roller configuration – with pre-bending • Top roller swings out to the front • Motorized left-right control • Cone rolling via inclined rear roller • Operation via foot pedal • Hardened rollers • Digital display Catalogue available at the following link:

Stav: ako nová (výstavný stroj), Rok výroby: 2025, SRF Master Illustration (left) 2 m Extraction Arm Application Area Kodedqzbrepfx Afdsdw - Low levels of smoke/dust - Intermittent use Benefits - Minimal repositioning of the extraction hood required - Increased flexibility thanks to additional hose connection at the rear Features - Safe operation thanks to filter monitoring - Extraction hood can rotate and swivel 360 degrees - Sliding handle and cable holder Process: - 3-stage Filter type: - Disposable filter Filter area: - Approx. 12m² Separation efficiency: - Over 99% Filter material: - Glass fiber fleece Welding fume separation class: - W3 Additional filters: - Two pre-filters Basic Data - Extraction capacity: max. 950 m³/h - Extraction arm diameter: Ø 150 mm - Extraction arm length: 2 m - Suction port diameter: Ø 150 mm - Power supply: 230 V / 50 Hz - Motor power: 1.1 kW - Sound pressure level: 72 dB(A) - Dimensions (W x D x H): 705 x 655 x 900 mm - Weight: approx. 71 kg

Stav: nový, Nosnosť: 30 000 kg Vlastná hmotnosť: 429 kg Rozmery: 2450 mm Výška: 535 mm Šírka: 265 mm Kdsded R Hvyjpfx Afdsw Maximálna dĺžka: 4250 mm Predĺžiteľné na (+ 800 JP): 6200 mm Predĺžiteľné na (+ 2 x 800 JP): 8500 mm Záruka: 12 mesiacov Šakle: 4 + 4 ks Predĺženia (po 1 sade, 4 ks): 800 JP Upevňovacia priečka na opasky: 800 LKP Prídavné zdvíhacie oko: 800 LK Zdvíhacie oko pre široké popruhy: 800 NKL Vyrovnávacia doska: 800 TL Odvíjač: 800 AR 7 Skladovací rám: 800 ST 2 XLift zdvíhacia traverza – číslo 1 pre všetky oblasti Rôzne odbory a priemyselné odvetvia čelia rôznym nárokom na manipuláciu s nákladom. Preto sa univerzálne traverzy pochopiteľne ponúkajú v rôznych nosnostiach. Naša ponuka siaha od zdvíhacích traverz s nosnosťou 3 tony až po zariadenia s nosnosťou do 50 ton. Traverzy majú čo najnižšiu vlastnú hmotnosť, aby sa neohrozila stabilita ani bezpečnosť pri používaní. Každý model je ľahko ovládateľný a vďaka malým rozostupom dier pokrýva široký rozsah dĺžky závesu. Univerzálne traverzy sú mimoriadne vhodné na širokú škálu zdvíhacích úloh, pretože ich možno použiť ako nosníkové traverzy, rozperné traverzy aj ako 4-bodové traverzy. Krížová konštrukcia nosníkov, ktorá dala traverzám meno, zároveň zabezpečuje, že vertikálne plochy záťaže sú stlačené len minimálne. Nastavenie jednotlivých rozostupov dier je jednoduché aj pre laikov, čo je dôvodom vynikajúcej užívateľskej prívetivosti. Pri použití ako X-traverza sa pod vplyvom záťaže vytvára väčšia vzdialenosť medzi závesným bremenom a reťazami alebo slučkami. Okrem toho si môžete voliteľne zakúpiť aj príslušenstvo ako zdvíhacie prostriedky, perfektne zladené s našou sériou XLift.

Rok výroby: 1991, Stav: pripravené na použitie (použité), číslo stroja/vozidla: 004744, Výkon odsávania: 1200 m³/h Pohon ventilátora: 0,75 kW Ksdpfx Afjfm Ekxsdedw Priestorové nároky: 700 x 660 x 1030 mm

Rok výroby: 1973, Stav: použitý, 2-die 2-krokový hlavičkovací stroj 10x100 Max. rýchlosť: 170 ks/min Kjdpfxsirt Ths Afdodw

Stav: dobrý (použitý), Rok výroby: 2012, pojazdová vzdialenosť osi X: 1 035 mm, zdvih osi Y: 560 mm, zdvih osi Z: 510 mm, maximálna rýchlosť vretena: 14 000 ot./min, Manufacturer: KOIKE Model: HD 100 VF Year of manufacture: 2012 Double driven and double geared Remote control with inverter and variable speeds Tilting 0 - 135° Specifications Metric | US Standard Table length: 1220 mm Kodpfsrg A N Nsx Afdjdw Table width: 1220 mm Table load capacity at 50 mm: 5000 kg Table load capacity at 200 mm: 4545 kg Table load capacity at 400 mm: 3500 kg Table load capacity at 600 mm: 2900 kg Table load capacity at 1,000 mm: 1850 kg Table rotation: 360° Dimensions (approximate) Length: 2000 mm Width: 1600 mm Height: 1700 mm Weight: 2400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Stav: použitý, Rok výroby: 1976, číslo stroja/vozidla: 761907, General / Technical Data: Heavy-duty mechanical folding machine made of sturdy welded construction, in very good condition Working width: 2000 mm Material thickness for steel ST 50 max.: 20 mm Upper beam (clamping beam) opening: max. 475 mm Adjustment of the folding beam: 200 mm motorized height adjustment Bending angle: 130° adjustable via electronic rotary angle input Upper beam speed: 6 mm/sec Folding beam rotation speed: 1.25 rpm (approx. 90 sec for 90° bend) Back gauge: motorized adjustment from 50-999 mm, with digital length display Machine dimensions (H x W x D): 3600 x 4350 x 4400 mm (without pit / with folding beam platform) Control cabinet dimensions (H x W x D): 1800 x 1200 x 400 mm Drive power (bending drive): 30 kW Drive power (upper beam / clamping beam): 22 kW Power supply: 500 Volt, 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / Special Equipment: • 5 sets of bending tools, each consisting of clamping and bending rails R 8, R 12, R 15, R 20, R 40 • Folding back gauge • Central lubrication • Machine documentation Note: Kodpecvtbyefx Afdjdw • The machine comes from a maintenance workshop • A pit 900 mm deep (foundation) is required for this machine; the underframe of the swivel drive shown in the pictures is for test operation and demonstration purposes only.