Granulátor, granulátor na plasty

mütek MVZ 7,5 kW

Granulator MVZ 7.5 kW
Demonstration unit available at special price

Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. Further details can be discussed after testing with your material.

Our granulators are used for shredding a wide range of materials such as plastics or wood. Shredders and granulators are ideal for a variety of size reduction applications.

For example, injection moulding machines generate reject parts and sprues that need to be recycled. In blow moulding, in addition to reject parts, there are also flash waste or start-up purges. Suitable for processing blow-moulding plastics such as PET bottles, PE/PP bottles, canisters or buckets, and pipes.

Material is fed from above into the grinding chamber via a hopper. The rotor inside is equipped with cutting knives. Material is reduced in size between the rotating knives and the stationary knives in the grinding chamber housing until it falls as defined regrind through a screen located beneath the rotor. *Option: The granulate is usually pneumatically conveyed to big bags, silos, or other containers.

The price applies only to the granulation system as shown in image 1.
- Fan, cyclone, and filters are optional extras.

---
Technical Data:

Godpfx Aed N Dn Djguebu
Granulator MVZ 7.5 kW
Motor: 7.5 kW
*Larger units available on request (4 to 75 kW)

Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material

Application example: Granulation of PE 1000 plastic
Initial material: approx. 40 mm chip length
Secondary size reduction down to approx. 6 mm
Throughput up to 50 kg/h using a 6 mm screen
(Throughput up to 80 kg/h using an 8 mm screen)

In G 30 wood chip secondary size reduction, significantly higher throughput rates can be achieved.
Up to a maximum of 400 kg/h with a 10 mm screen. *with metered infeed, e.g. by conveyor or auger screw
Details after test run with approx. 30 kg.

Rotor diameter: 180 mm
6 rotor knives, each 225 mm long
4 stator knives, each 225 mm long
Dimensions: 930 x 730 x 1420 mm
Weight: 450 kg
Extraction nozzle: 100 mm
Screens: 6, 8, and 15 mm – other sizes available on request

Price per screen: €390
Replacement knife set: €679

Suitable for, for example:
- Plastic waste of all kinds
Various materials – HDPE, LDPE, PP, PS. PC, PA
- Biomass
- Wood
- Herbs
etc.

Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc.

---
Larger systems are also available as options:

Granulator MVZ / 18.5 kW
Throughput up to 350 kg/h *depending on screen and material
Opening: 620 x 400 mm
Special net price: from €24,995 net
*Optionally available with matching extraction/transport system

Granulator MVZ / 30 kW
Throughput up to 400 kg/h *depending on screen and material
Opening: 620 x 500 mm
Special net price: from €29,795 net
*Optionally available with matching extraction/transport system
---

For the correct configuration of the machine, the following information is important:
- Length x width x height of the input material?
- Screen size, to how many mm should the material be reduced?
- Required hourly throughput in kg?
- Wall thickness in mm?
- Material description
Photos can also be helpful.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.