Vyvrtávačka drážok Vyvrtávačka hmoždiniek

GANNOMAT mit Lieferung nach D und in EU

Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323

Very good condition, the machine is absolutely as-new. It comes from an educational institution that was closed approximately one year after the machine was purchased.
The machine has a maximum of 10 operating hours.
With this machine, slots (long holes) can be milled and dowel holes drilled on two levels without re-clamping.
380V, 1500W
2800 rpm
Year of manufacture: 2005
With this machine, you can mill slots for, for example, lock cases and similar applications, or create all types of frame dowel joints—at right angles, butt joints, and mitre.
Ideal for producing dowel joints in timber frame construction, furniture, doors, windows, and stair manufacturing, as well as similar applications.
Thanks to two-level drilling, positioning stops, and the overall setup, dowel joints can be produced in a very short time, making the machine highly efficient.
With two fold-out table extensions.
The machine requires a compressed air connection (6 bar); air consumption is very low.
Iodpfx Aexqy Dnsc Hoik
Right-hand rotation.
Mills and drills very well and cleanly.
Comes with two angle stops (one center stop and one side stop, usable on both sides).
Also includes an adjustable mitre stop.
At the front of the machine table, there is a 2000 mm long fence rail with two flip stops each; the fence rail can be shortened or extended as required.
Workpiece clamping is achieved with two pneumatic clamping cylinders.
Height adjustment between the two drilling levels is pneumatic as well, with a pneumatic switch located at the front of the machine, allowing quick adjustment of grids and drilling levels.
The height of each drilling level can be read on two mechanical counters; above these are adjustment screws for setting the drilling heights.
With a precision 12 mm grid rail, featuring a center index and 12 stops to the left and right.
Can be quickly converted to slot mortising; in this mode the machine can be used without grid indexing, with two adjustable stops left and right for a working stroke up to 420 mm wide.
Maximum drilling height: 100 mm
Maximum drilling depth: 150 mm (with stop and scale)
Maximum workpiece height: 160 mm
Everything works perfectly.
We offer nationwide delivery within Germany for €220.00 including demonstration, so you take no risk when buying. Delivery to Austria and the EU is possible on request.
The machine table is 870 mm wide, 140 mm deep at the sides, and 350 mm deep in the middle.
Professional quality equipment, not DIY-store junk.
Ready to use immediately.
Includes two 2-jaw drill chucks up to 20 mm.
Very robust and durable construction.
Precision guides with play-free ball bushing bearings are in good and smooth-running condition.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.