Pásová píla - horizontálna

GERD WOLFF KSY 550 X 700

Stav: nový, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Iodpfxefg E Hpj Agteht Machine weight approx. 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top cutting technology and maximum performance when machining special steels. - The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and its speed is adjustable. - All movements of the machine (saw frame, vice, feed, blade guides) are carried out via modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction as well. - Another distinctive feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - With the height control of the band saw position, the operator can place the blade close to the top of the material. After the cut, the blade automatically returns to its previous position. Alternatively, you can select the option to remain in the lower position. During the cutting cycle, the software compares cutting load with preset values and can stop the sawing system in case of irregularities. - The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. - The hydraulic unit, including filter and manometer, ensures particularly smooth operation at consistent pressure. - Precision-ground carbide inserts securely clamp the blade, complete with side-hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw blade is tensioned by a hydraulic cylinder, which is controlled by the machine’s software. Tension is automatically released after a set time in idle or after a cycle is completed. - Automatic version with CNC control available in X-TECH 900 / 1200 models for high production rate series, featuring a feed length of 500 mm. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor for precise material positioning even under maximum load. - All guided movements are powered by four recirculating ball guides with high capacity for both static and dynamic loads, ensuring drastically reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stav: použitý, Rok výroby: 2007, šírka rezania (max.): 1 060 mm, rezacia výška (max.): 1 060 mm, Kasto HBA 10×12 Bandsaw, Year of Manufacture: 2007 Cutting Ranges: - Round cutting range: 1,060 mm - Square cutting range: 1,060 x 1,060 mm - Flat cutting range: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Minimum cuttable dimension approx. Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length (single cut): 20 mm Iedpswk D Efefx Agtjht Minimum remnant length (automatic operation): 100 mm Max. table load: 50 tons Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Continuously variable cutting speed at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Machine vice clamping force: 50,000 N Saw band dimension: 11,430 x 80 x 1.6 mm Cutting feed: infinitely adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: by easily replaceable, motor-driven brush This offer is exclusively for commercial customers as per §14 BGB. No sale to private individuals.

Stav: nový, Cutting range at 90 degrees: round 350 mm Cutting range at 90 degrees: square 330 mm Cutting range at 90 degrees: rectangular 500 x 310 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total connected load: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column double mitre band saw K-tech DG 50/33 HA-I • 2-Column mitre saw • Solid yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cuts, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) Isdpfx Aefg E Hlsgtsht • Energy-efficient and low-vibration due to angled cuts • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Oversized drive wheels (520 mm) each • Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid-feed lowering to material start or for batch cutting, direct cut 4. Saw blade off 5. Raise frame just above material 6. Open vise

Stav: nový, Rok výroby: 2023, Cutting diameter: 1100 mm Saw band length: 11000 x 67 mm Cutting width: 1.6 mm Cutting range at 90 degrees, square: 1100 x 1100 mm Cutting range at 90 degrees, flat: 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space requirement: approx. 2800 x 1700 x 5200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor screw. A chip trolley, approx. 60 x 50 x 40 cm, is included in the scope of delivery. The roller tables can be moved forward and backward via the control panel. A 1.40 x 1.00 meter roller table is located on the discharge side. A motorized roller table, 2 x 1.40 meters, is located on the feed side. Optional Specifications - Motorized system for roller table - Laser line - Extra double roller table - PLC screen - Anti-vibration system Ihedstq Dw Eopfx Agtot The images are for illustration purposes only and do not represent a true-to-scale depiction of the machine.

Stav: nový, Polautomatická pásová pila na řezání plných tyčí a profilů středních rozměrů, s vysokou produktivitou a vynikající přesností řezu. Robustní konstrukce zajišťuje stroji potřebnou tuhost a přesnost řezacího agregátu. Ihsdpfxefibd Te Agtst Pohon pásu s dvourychlostním motorem a speciální převodovkou s bronzovým ozubeným kolem a kaleným, broušeným šnekem. Správně dimenzovaná setrvačníková kola. Robustní vodítka pásu osazena utěsněnými ložisky a nastavitelnými plátky z karbidu wolframu (widia). Napínání pásu pomocí elektromechanického zařízení s mikrospínačem rotace pilového pásu. Ochranné bezpečnostní zařízení na krytu setrvačníkových kol a na pile. Šířka řezu: 1,5 mm Rozsah řezání: 60° vlevo, 60° vpravo Nastavitelný doraz pro opakované řezy stejné délky. Čistící zařízení pásu s kartáčem. Hydraulická pohonná jednotka motor: 0,37 kW Chladící elektročerpadlo pásu: 0,09 kW Výška čelistí svěráku: 200 mm Délka čelisti svěráku: 185 mm Výška pracovního stolu: 760 mm Hmotnost stroje: 820 kg

Stav: nový, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 450 mm Cutting capacity at 90 degrees: rectangular 650x450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Required space approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-column double mitre bandsaw K-tech DG 62/45 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation due to angled cutting, feed regulator + cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (cleaning/disinfection) Ieded Iipmjpfx Agtjht - Energy-efficient and low vibration due to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15–100 m/min - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned drive wheels (520 mm) each - Easy-to-read mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material start, or cut directly for series cuts 4. Switch off saw blade 5. Raise frame just above material 6. Vice opens

Stav: použitý, Rok výroby: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9-6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19 - 890 (x) mm/min Spindle taper: SK 40 Column overhang: 200 - 680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive via a frequency inverter "made in Germany" and digital 3-axis position display DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity achievable by tapered roller bearings, less than 0.01 mm runout measured at the quill. Automatic quill feed. Forward/reverse for thread cutting. X and Y axes with adjustable dovetail guides. Coolant system. Y-axis with flat guideways. Large Y-axis travel of 400 mm. Motorised table elevation with rapid traverse (Z-axis). Features: - Frequency inverter quality Made in EU - Drilling-milling head, tiltable ± 45°, overhang 200 - 680 mm - Spindle speeds infinitely variable, exceptionally wide speed range - Adjustable drilling depth stop with millimetre scale, readable from the front - Adjustable, large protective screen - Cross table: robust, large dimensions, precisely surface-ground - Motorised Z-axis table height adjustment - Adjustable end stops - OPTI control panel: Integrated control panel; integrated digital position display DPA 21 including spindle speed display - X-axis: Motorised table feed, infinitely variable feed adjustment, rapid traverse, forward/reverse Technical Data: - Length (Product): 1,500 mm - Width/Depth (Product): 1,450 mm - Height (Product): 2,200 mm - Net weight: 1,150 kg - Total connected load: 4 kW - Electrical voltage: 400 V - Phases: 3-phase AC - Mains frequency: 50 Hz - Max. face mill diameter: 100 mm - Max. end mill diameter: 20 mm - Vertical spindle overhang: 200 - 680 mm - Vertical spindle mounting: ISO 40 DIN 2080 Iodpfxot U Rm Ie Agteht - Vertical spindle speed range: 8 steps, electronically adjustable - Horizontal milling table length: 1,370 mm - Horizontal milling table width: 254 mm - Distance vertical spindle – horizontal table min.: 40 mm - Distance vertical spindle – horizontal table max.: 446 mm - Horizontal table T-slot size: 16 mm - Horizontal table T-slots: 3 - Horizontal table T-slot spacing: 63 mm - Horizontal table max. load capacity: 275 kg - Vertical spindle drive motor: 3 kW - Coolant pump motor: 100 W - Manual X-axis travel: 930 mm - Manual Y-axis travel: 400 mm - Manual Z-axis travel: 406 mm - Automatic X-axis travel: 850 mm - Automatic Z-axis travel: 350 mm - Drilling capacity steel (S235JR): 32 mm - Continuous drilling capacity steel (S235JR): 28 mm - Milling head rotation range (Z to X plane): +/- 45 degrees - Quill stroke: 127 mm - Quill feed: 0.04/0.08/0.15 mm/rev

Rok výroby: 2021, Stav: veľmi dobrý (použitý), Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Ihsdpem Ew Stjfx Agtjt Speed from 0.01 to approx. 0.7 rpm.

Stav: dobrý (použitý), Rok výroby: 1990, šírka rezania (max.): 1 000 mm, rezacia výška (max.): 140 mm, dĺžka stola: 1 400 mm, výkon: 5,5 kW (7,48 k), Typy: F 45, číslo stroja: 90-8-86 Iedpfx Astxh Nijgteht

Stav: použitý, Liatinová pásová píla značky Primultini s volantom 100 cm, so sklopným stolom, maximálny užitočný priechod dosiek 90 cm. Výkon motora 10 Hp. Použitá. Isdpfxstq Dl Te Agteht