Olepička hrán Hebrock K36

HEBROCK K36

Stav: pripravené na použitie (použité), Rok výroby: 2024, výška obrobku (max.): 60 mm, posuv osi X: 10 m/min, maximálna rýchlosť vretena: 16 000 ot./min, typ ovládania: Riadené pomocou PLC, The machine has already been dismantled and stored by a professional. TECHNICAL DETAILS Cut-off saw station speed: approx. 16,000 rpm Milling station speed: approx. 16,000 rpm Maximum milling depth: 3 mm Suitable for edge thickness: 1 mm Hotmelt adhesive specification for edge material max.: 3 mm Feed speed: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free coated glue pot with quick-change pre-fitting Adhesive discharge device Pneumatic milling adjustment Combination version with replaceable carbide milling cutters Corner rounding unit Radius scraper blade Flat scraper blade with pneumatic lifting device Polishing station Robust chain drive Ball-bearing double roller top pressure Aggregate viewing window from both the rear and the operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change device for corner rounding unit Iodpfx Aezb Idfegveth Hebrock jointing up to 60 mm workpiece thickness Hebrock edge protection spray Hebrock nesting (milling + radius scraper blade) Hebrock Airtronic Note: Accessories without guarantee. Applies: “Object purchased as seen.” The prospective buyer is required to verify the completeness of the item on-site.

Stav: použitý, Rok výroby: 2017, Rozmery stola: 2700 x 900 mm. Upínanie HSK 63 F. 2x vretená pre upínanie HSK 63 F (30 + 40 mm). Sklon vretena: -45° až +45°. Využiteľná dĺžka vretena: 180 mm. Pravý/ľavý chod. 4-valcový podávač s motorickým nastavením výšky/šírky a pneumatickým upínaním. 7,5 kW brzdový motor s elektronickým meničom. CNC nastavenie pre: - sklopenie vretena - nastavenie výšky vretena - kompletný doraz - predná časť dorazu - pojazd stola pred vretenom - elektronická plynulá regulácia otáčok 1.000 - 10.000 ot/min - Aigner frézovací doraz s hliníkovými čeľusťami - dotykový displej s grafickými funkciami - operačný systém Windows - kamera na import obrázkov nástrojov a profilov - doraz úplne výklopný - automatický rozbeh do hviezdy/trojuholníka - centrálne mazanie. Hmotnosť cca 1360 kg. Skladové miesto: Nattheim. Itsdpfx Aeyudidegvjh

Stav: nový, Rok výroby: 2025, Hebrock K 36 – Top Specification with Motorized Adjustment - Showroom Model - New Machine - - Available immediately - This Hebrock bestseller offers unprecedented possibilities. Developed to meet the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. Thanks to the ability to equip the machine with a profile milling cutter and a multi-radius scraper blade, Hebrock sets new standards for perfect edge processing across a variety of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Technical Data: - Max. edge thickness: 3 mm - Min/Max. workpiece thickness: 8 – 60 mm - Min. workpiece length: approx. 140 mm - Feed speed: approx. 15 m/min - Ready for operation: approx. 6 min - Max. power input: Ø approx. 7.4 kW - Electrical connection: 400 V – 3 Ph – 50 Hz - Working table height: approx. 900 mm - Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) - Weight: 1750 kg Equipment: - Hebrock K 36 - 15 m/min - Edge banding machine K36 - With PLC control (incl. 15'' touchscreen), hot-melt glue application to the workpiece for edging material up to 3 mm; jointing cutter (incl. Dia tool) for up to 3 mm cutting depth, maintenance-free coated glue pot with cartridge quick-change system incl. glue discharge system, high-frequency twin-motor end-trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic cutter adjustment and indexable insert tool (combination version), corner rounding unit, radius scraper, flat scraper (incl. pneumatic retraction), cleaning station, robust chain feed, ball bearing mounted double roller upper pressure, viewing windows for aggregates from both the operator and rear sides, signal lamp for workpiece processing sequence, extendable workpiece support, feed approx. 15 m/min, edge banding up to 60 mm workpiece thickness Options included: - 36/08/1: Quick-change device for corner rounding unit - 36/08/2/1: Additional interchangeable motor for corner rounding unit R=1 - 36/09/1: Multi-radius scraper blade - 36/24/1: Separating agent spraying device - 36/24/2: Cleaning agent spraying device - 36/25: Edge protection spraying unit - 36/27: Nesting (1x milling station + 1x radius scraper) - 36/30: Pneumatic 3-point adjustment - 36/30/1: Multitool for high-frequency milling station (R2/R1/chamfer) - 36/45: Axis package for motorized adjustment of panel, edge thickness and jointing depth Itjdpsi Am Ukjfx Agvsh Location: ex stock 54634 Bitburg - Available immediately -

Stav: veľmi dobrý (použitý), Edgebander HEBROCK K36 Airtronic – used – PC control with monitor Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Motorized adjustable infeed fence Diamond jointers for both conventional and counter-rotation Quick-heating glue pot Interchangeable glue pot system Suitability for PUR adhesives Cut-off saw with HF motor Flush trimming unit Flush/radius/bevel trimming unit Pneumatic switching for trimming unit Multi-profile milling tool Itodpfx Agjymyp Rsvoh Multi-radius scraper Chip collector box for radius scraper Air jet at radius scraper Flat scraper Air jet at flat scraper Exchangeable copying motor for corner rounding Spray unit for separator Spray unit for cleaner Spray unit for antistatic coolant Spray unit for slip agent LED machine enclosure lighting Interchangeable glue pots Zero-joint Airtronic system ----- Technical data ----- Edge thickness, coil material: 0.5 – 3 mm Max. edge thickness, corner rounding: 3 mm Workpiece thickness: 8 – 60 mm Workpiece thickness, corner rounding: 45 mm Min. workpiece length: 200 mm Feed speed: 7–10 m/min Edge material disc diameter: 850 mm Cut-off knife for coiled material up to: 3 mm Jointer motor power: 2x 2.2 kW Cut-off saw power: 0.37 kW Trimming unit power: 2x 0.37 kW Corner rounding power: 0.37 kW Buffing unit power: 2x 0.18 kW Extraction port diameter, jointer unit: 60 mm Compressed air connection: 7 bar Total length: 5,540 mm Dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm Weight: 1,700 kg Quality information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Stav: nový, Rok výroby: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving. It also features the equipment you need to process perfect edges from the very beginning: diamond-tipped jointing cutters ensure excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, a trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Itodelht Hzepfx Agvjh F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and application of hot-melt adhesive to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change basin setup including glue discharge device, high-frequency trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination design), robust chain feed, ball-bearing double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stav: použitý, Rok výroby: 1996, Hrúbka hrany: 0,4 - 12 mm Rolovaná hrana: 3 x 45 mm resp. 0,8 - 60 mm Minimálna šírka obrobku: 65 mm Minimálna dĺžka obrobku: 160 mm Hrúbka obrobku: 10 - 55 mm Posuv: 13 m/min Predfrézovanie (spájanie) Lepiaci zásobník Quickmelt Lepiaca jednotka Orezávanie Zarovnávanie frézovaním Skosené frézovanie Rádiusové frézovanie Kopírovanie rohov Plochá škrabka Leštiace agregát Rozmery stroja: 7450 x 1220 x 2400 mm Hmotnosť: 3000 kg Miesto skladovania: Nattheim Isdpfx Agsvvkd Toveth

Stav: veľmi dobrý (použitý), Štvorstranná hobľovačka Weinig max. šírka hobľovania: 230 mm max. výška hobľovania: 120 mm 5 hláv: spodná - 5,5 kW; ľavá a pravá - 11 kW; horná - 11 kW; spodná - 5,5 kW posuv - 4 kW hlavy plne nastaviteľné Itedpfxerigxye Agvsh Elektrické nastavenie výšky a šírky hobľovania vretená 40 mm posuv na kardanových hriadeľoch, s plynulou reguláciou Robustná hobľovačka značky WEINIG Dĺžka stroja: 415 cm Stroj otestovaný v originálnom stave

Stav: nový, HLAVNÉ VLASTNOSTI STROJA: - Jednovretenová vŕtačka na vŕtanie v rozsahu 0 - 90 ° - Uhol sklonu hlavy nastaviteľný pneumaticky - Liatinové dorazy - Vretená prispôsobené pre rýchloupínacie systémy - Patentované pneumatické prítlaky materiálu - Pracovný stôl z liatiny - Rýchle a presné nastavenie - Presné vŕtanie ŠTANDARDNÁ VÝBAVA STROJA: - 2 hliníkové pravítka s dĺžkou 1,5 m (pravé a ľavé) s dvoma zarážkami - 5 rýchloupínacích držiakov Technické údaje: Počet vreten: 21 Itedpfxsp Ecdgs Agveh Vzdialenosť medzi prvým a posledným vrtákom: 640 mm Počet pneumatických prítlakov: 2 Vzdialenosť medzi stredmi jednotlivých vreten: 32 mm Max. hĺbka vŕtania: 65 mm Spotreba vzduchu: 10 l/cyklus Max. veľkosť obrábaného dielu: 915 x 3000 mm Max. hrúbka dielu: 70 mm Prevádzkový tlak: 6 - 7 bar Otáčky: 2800 ot./min. Výkon motora: 1,5 kW Hladina hluku: 76,1 dB Celkové rozmery: Dĺžka: 1030 mm Šírka: 1030 mm Výška: 1285 mm

Stav: ako nová (výstavný stroj), Rok výroby: 2025, CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision components and high own weight Standard with forward/reverse rotation and electronic interlock for direction change 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Isdpodqzcxofx Agvjth Large cast iron worktable for lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminium fence jaws included as standard Powerful industrial motors Equipment details: - Milling fence - Milling fence with handwheel adjustment accessible from the front - With digital readout - Interchangeable spindle - MK 4 interchangeable spindle system standard on all CASADEI F 23 and F 25 models - Optional sliding table - Optional sliding table for small tenoning work and slotting Scope of delivery: - Manually tiltable spindle from +45° to -45° - Speed display via LED on front - Aluminium fence jaws - Curved milling guard - Forward/reverse spindle rotation - MK 4 interchangeable spindle - Milling fence with handwheel adjustment accessible from the front with digital readout - Table extensions left and right (2500 mm length) - Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length at Ø 30-35 mm: 140 mm Usable spindle length at Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. cutter diameter for profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaping cutter Ø: 160 mm Max. retractable tool Ø: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø, fence: 1 x 120 mm Extraction port Ø, under the table: 2 x 80 mm Location: In stock 54634 Bitburg - Immediately available -

Stav: použitý, Rok výroby: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm; combi milling station radius R 2.5 mm. Technical description: - Hotmelt adhesive application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trim saw station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combi version) and fine adjustment of cutter from operator side - Free slots for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trim saw - Signal lamp for workpiece tracking - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate viewing windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: depending on equipment approx. 1,550 kg - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic incl. cooling and anti-static spray unit, year 2014: - 1 pc hot air module for producing the optical zero joint using special edge materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray unit - Including 2 extra quick-change edge channels - Including special version corner rounding milling unit - Max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edge banders - Retrofit also possible - surcharge on request Itedpfxex S Hmze Agvsh - Technical data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation in approx. 2 min - Upgrade to 8 mm edge thickness, 1 pc, max. 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc 3-point pneumatic cutter adjustment - 1 pc switching radius – chamfer – flush for combi milling stations - Eliminates manual adjustment at the combi milling station for the third reference point - PLC control mandatory - Buffing station (polisher), 1 pc - Corner rounding unit, 1 pc, incl. combi tool and pneumatic chamfer/radius adjustment - Max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm - Radius scraper, 1 pc, incl. pneumatic lift-off device, radius R 2.0 mm - Flat scraper, 1 pc, with pneumatic infeed control - Complete chassis, 1 pc - Gluepot quick-change system incl. glue discharge mechanism downward, preparation for 1 pc (without second gluepot) – including possibility for processing PU glue with the machine - Grooving saw unit, vertical into the panel, 1 pc, incl. pneumatic lift-off, vertical groove - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from workpiece edge: 14.0 mm - Special version grooving saw motor, increased power, 1 pc - Extraction for jointing unit internal, 1 pc, at dust collection unit of the machine - Ball bearing for corner rounding mill, 24.1 mm, 1 pc - Ball bearing for corner rounding mill, 24.2 mm, 1 pc - Protective agent spraying device, 1 pc, for edge surface for sensitive edge materials - Panel spray device, combined, 1 pc (separating and cleaning agent spray device) Storage location: Supplier