Univerzálna skúšobná / ťahová skúšobná stroj

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5kN

Mechanical construction:

2 backlash-free ball screw drives, powered by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
1 test space up to nominal load:
Test space width: 420 mm
Maximum test stroke without test tools, adapters, and KMZ: 1025 mm

Travel speeds:

Test speed: 0.0015 - 1000 mm/min at full load
Return speed: 1000 mm/min

Force measurement:

Measuring range: 0.8 - 100% of nominal load, accuracy class 1 (optionally class 0.5)
(+/- 1% of the displayed value in accordance with DIN EN ISO 7500-1)
Force measurement resolution: +/-180,000 digits at 20 ms integration time

The machine is delivered with a factory test certificate. If the customer requires a factory or DKD calibration at the installation site, this will incur an additional charge.

Crosshead position measurement:

Incremental square-wave input with encoder monitoring, storage of crosshead position
Resolution of crosshead travel measurement: 1 µm

Dimensions (W x D x H) / Weights:

Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller on the load frame

Standard functions:

Force, displacement, and strain control
Overload protection, automatic force calibration,
specimen break detector, return function,
manual operation via control panel with display (force, displacement)

Data processing:

USB 2.0 interface or LAN,

Data transmission rate to PC: 50 Hz (standard), optionally higher data acquisition rate via special software add-on module
Internal data processing rate: 2 ms
Optional: maximum of 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) available for additional sensors
Iaodpeyyu I Njfx Afzst

115/230 VAC, 0.5 kVA, 50/60 Hz, 5-40°C, 20-80% humidity
Required options for operation: Load cell, grips, PC (current standard, operating system 8-10-11, test software)

Load Cell 5000N
Measuring range: 5-5000N tension and compression, with nominal 2mV/V output signal, overload protection: +/-100%, linearity: +/-0.05%, hysteresis: +/-0.03%, repeatability: +/-0.02%, incl. 1.5m connection cable and calibration certificate.

With Extensometer MFX 200

The MFX 200-B extensometer, with its robust design and high measuring accuracy, is suitable for almost all specimens starting from an initial gauge length of 10 mm. All strains, from the modulus of elasticity to specimen break, can be measured. The device is suitable for use in both the upper and lower test space without restrictions. In conjunction with the MFQ-A, r- and n-values can be determined for thin sheets. Two measuring systems are available, with differences in signal output and specific technical data (see technical documentation).

Inzerát bol automaticky preložený. Chyby v preklade sú možné.