Tbt kúpiť použité (16)

Stav: generálne opravený (použitý), Rok výroby: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Solid drilling capacity: 40 mm Spindle speed: 670 - 3,560 rpm Centre height over bed: 380 mm Centre height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Centre height over table: 250 – 600 mm Z-AXIS Tsdpjw Ekfuofx Agvsc Feed rate: 0-7,000 mm/min W-AXIS – 400 mm Feed rate: 0-7,000 mm/min X-AXIS – 800 mm Feed rate: 0-2,000 mm/min Y-AXIS – 350 mm Feed rate: 0-3,000 mm/min Rapid traverse: 3.5 m/min Nominal motor speed: 8,000 rpm Nominal motor power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Control: Siemens Sinumerik 840 Dsl Incl. coolant system 1,700 l 20 solid carbide single-lip drills from D=6mm–20mm / lengths from 1,200–1,750mm

Stav: takmer ako nový (použitý), Rok výroby: 2022, Funkcionalita: plne funkčný, číslo stroja/vozidla: 106882-11, celková dĺžka: 4 400 mm, celková šírka: 1 700 mm, celková výška: 2 700 mm, celková hmotnosť: 7 000 kg, The drilling method employed by the deep hole drilling machine is the single-lip (single-edge) deep drilling process. Drilling Unit Information: - Drilling depth: 200 mm - Minimum/maximum drilling diameter: 1-12 mm (based on ST 60) - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Continuously variable spindle speed: 1,000 - 20,000 rpm - Continuously variable feed rate: 10 - 25,000 mm/min - Rapid traverse: 25,000 mm/min - Nominal slide travel: 650 mm - Slide width: 460 mm - Slide travel, X-axis: 200 mm, rapid traverse: 25,000 mm/min - Slide travel, Y-axis: 200 mm, rapid traverse: 25,000 mm/min Coolant/Lubricant System: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drill oil feeds - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction unit - 1x scraper-type chip conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery capacity: 1 - 38 l/min Pump drive: 7.5 kW Spindle Unit: - Motor spindles with frequency-controlled, stepless speed regulation. - Spindle head with interface for tool holder. - 2 x tool holders for adapter sleeve as per VDI 3208 SE10x60; rigidly mounted to the motor spindle’s spindle head. Drill Bush Carrier: - The drill bush carrier is positioned via the NC axis. - Cast design, mounted on linear guideways. - W-axis driven by AC servomotor and ball screw with indirect absolute position measuring system. Workpiece Slide: - The workpiece slide is designed as a cross slide for both vertical and horizontal positioning of the workpiece; suitable for mounting fixture plates or special clamping devices. - Main body in cast design with linear roller guides. - X and Y axes driven by AC servomotors and ball screws. - Direct, absolute measuring systems. Table plate with clamping and alignment slot. Clamping Table with NC Rotary Table for Positioning: Tjdpfxswh Rp Es Agvsc - With rotary axis and tilting axis. - Hydraulic clamping for both rotary and tilting axes. Technical specifications: - Tilting range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Index accuracy: rotary axis ± 15" / tilting axis ± 30" Electrical Equipment: - 1x drilling process monitoring system - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine Accessories: - 2 x holders for spring-loaded drill bush holder, mounted on the drill bush carrier. - For max. drill diameter 18 mm.

Stav: dobrý (použitý), Funkcionalita: plne funkčný, hĺbka vŕtania: 1 000 mm, MYYDÄÄN: TBT T 30 – 1000 KT syvärei’ityskone Saksalainen laadukas kone tarkkaan poraukseen Yleiskuvaus: Myytävänä on vahva ja luotettava syvärei’ityskone tunnetulta saksalaiselta valmistajalta TBT Tiefbohrtechnikilta. TBT on syvärei’itysteknologian globaali markkinajohtaja ja tarjoaa koneita, joilla saavutetaan ainutlaatuinen tarkkuus pitkissä porausoperaatioissa. Tekniset tiedot: Malli: T 30 – 1000 KT Valmistusvuosi: 1977 Maksimi poraussyvyys: 1000 mm Porausläpimitta: n. 4 – 30 mm Tsdpfx Ajy Rvc Aogvoc Nimellisteho: n. 20 kW Käyttöjännite: 380 V / 50 Hz Konetyyppi: Polvipöytämalli (KT) joustavaan kiinnitykseen. Keskeiset edut: Vankka rakenne: Saksalainen raskasrakenne takaa ylivoimaisen vakauden ja täsmällisyyden. Korkea suorituskyky: 20 kW moottorilla riittävästi tehoa eri metalliseoksille. Monikäyttöisyys: Ihanteellinen akseleiden, muottien ja muiden pitkien kappaleiden poraukseen.

Stav: veľmi dobrý (použitý), Vŕtačka TBT, séria T30, stolový typ Model T30-1000KTN Výrobné číslo 410.364.016 Rok výroby, približne 1980 Počet vretien 1 Rozsah vŕtania v oceli 4 – 30 mm (plný materiál) Zvyšovacie vŕtanie 40 mm Nominálna hĺbka vŕtania 1000 mm Rozmery stolovej dosky s drážkami: dĺžka 850 mm x šírka 750 mm Celkové rozmery stolovej dosky: dĺžka 1100 mm x šírka 1000 mm Priečny pohyb stolovej dosky 800 mm (približne) Vertikálny pohyb stolovej dosky 400 mm (približne) Pozdĺžny pohyb vŕtacieho suportu 1450 mm Šírka vodorovnej vodiacej koľajnice 250 mm Otáčky vretena až do približne 9000 otáčok za minútu Motor vretena 25 kW Celkový príkon 41 kW Todpfx Agszuxp Rjvjc Dodáva sa s: 2 kusy vodiacich líšt. Posuv s guľovým skrutkovým mechanizmom. 2-osový digitálny odčítavací systém pre priečny a vertikálny pohyb stolovej dosky a pre pohyb vŕtacieho suportu. Nádrž na chladiacu kvapalinu TS25-1000. Vŕtacie púzdra. Na predaj u spoločnosti Jet Machinery Ltd Číslo položky Jet Machinery: #27033 Výrobné číslo stroja: 410 364 016 Cena: 17 500,00 GBP + DPH Napriek tomu, že bolo vynaložené maximálne úsilie na zabezpečenie presnosti uvedených informácií, ich presnosť nie je zaručená. Odporúčame potenciálnym kupujúcim, aby si overili všetky dôležité údaje. Zákon o ochrane zdravia a bezpečnosti pri práci z roku 1974: Nie je reálne možné, aby sme ako dodávatelia zaručili, že dané zariadenie bude spĺňať požiadavky zákona, najmä pokiaľ ide o bezpečnostné prvky, pre vaše konkrétne použitie. Potenciálni kupujúci by mali zabezpečiť, aby odborník na bezpečnostné prvky skontroloval zariadenie pred jeho použitím.

Rok výroby: 1985, stav: použitý, Vŕtací postup: jednohlavové vŕtanie, spôsob práce: rotujúci nástroj, počet vŕtacích vretien: 1, menovitá hĺbka vŕtania: približne 750 mm, rozsah vŕtania pri plnom vŕtaní do ocele: približne 30 mm, rozsah vŕtania pri rozšíreovaní otvorov v oceli: približne 40 mm, pohon vretena: 11 kW, max. rýchlosť vretena v rozsahu I: 1800 otáčok/min., max. rýchlosť vretena v rozsahu II: 5700 otáčok/min., max. posuv v rozsahu I: 320 mm/min., max. posuv v rozsahu II: 160 mm/min., rýchly posuv: 3,5 m/min., upínací stôl X/Y: 420 mm/1280 mm, priečny posuvný stôl ovládaný manuálne, max. priečny posuv: 400 mm, plocha upínania stola X/Y: 600 mm/600 mm, chladiaci systém vysokým tlakom pre hlboké vŕtanie s olejom a nádržou chladiacej kvapaliny o objeme 1000 l, prietok: približne 2–94 l/min., max. tlak pri max. prietoku: 45 bar, výkon čerpadla: 11 kW, samostatná ovládacia skriňa. Stroj bol v roku 2018 rozsiahlo čiastočne repasovaný, pri čom bol stroj rozobraný a vyčistený, všetky vodiace prvky a opieracie plochy boli prebrúsené a čiastočne oškrabané, motory boli skontrolované a novo uložené, vŕtacie vreteno bolo novo uložené, guľôčkové vreteno vrátane matice bolo vymenené, čerpadlový motor bol repasovaný, stieračová sada bola vymenená, stroj bol nanovo nalakovaný a všetky funkcie boli skontrolované a vylepšené. Vrátane rozsiahleho príslušenstva. Dokumentácia je k dispozícii. Prehliadka je možná po dohode. Tjdpfx Aszu Szysgvoc

Stav: veľmi dobrý (použitý), Rok výroby: 1985, Nominálna hĺbka vŕtania 750 mm Plné vŕtanie do ocele cca 30 mm Maximálne otáčky vretena 5700 min-1 Upínací stôl 1280 x 420 mm Priečny posuvný stôl Tedpfxszwhkvs Agvoc Nádrž na chladiacu kvapalinu Rôzne príslušenstvo (vrtáky, puzdrá)

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: 106341-11, Rok výroby: 2005, celková hmotnosť: 8 000 kg, celková výška: 2 700 mm, celková dĺžka: 5 660 mm, celková šírka: 3 956 mm, The deep drilling machine utilizes single-lip deep hole drilling as its process. Drilling Unit Information: Tedpsw E H E Rsfx Agvsc - Number of spindles: 1 - Continuously variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 – 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 ccm/min Traverse Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtering capacity: 120 l/min for machining in: steel / non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and geared spindle drive. Precision angular contact ball bearings and lifetime grease lubrication for spindle support. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool interface Drill Bushing Holder: - Design as 2-position turret with electromotive swivel mechanism - Positioning via Hirth coupling - Turret head with mounts for: Deep drilling tool guides Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc-type magazine with 20 positions including traverse stroke Automatic Tool Changer for Deep Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK interfaces Clamping Table with W-Axis and NC Rotary Table: - Length/Width: 800 x 600 mm - Positioning accuracy: B-axis ±30 - Payload (centrically): 1,500 daN Workpiece Clamping Devices: - 1x tailstock with manual clamping movement - 1x NC indexing device (a-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x Sinumerik 840D CNC control (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400 V ±10% – frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stav: takmer ako nový (použitý), Stroj je kompletne generálne opravený a preto je ako nový! Technické údaje Todpsfgwlbefx Agvec Vŕtacia metóda: jednostranné vŕtanie Počet vreten: 1 Vrtací rozsah v oceli: priemer 1–6 mm Hĺbka vŕtania: 400 mm Maximálna dĺžka obrobku: 400 mm Výrobca: TBT / SFT Nová elektroinštalácia a nové CNC riadenie Siemens! Sme vaším spoľahlivým partnerom v oblasti hlbokého vŕtania. Radi prijmeme aj dopyty na zákazkové hlboké vŕtanie.

Stav: dobrý (použitý), Rok výroby: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Tjdpfovca Rcjx Agvjc Sealing housing with follow rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No guarantee is given for the accuracy, completeness, or currency of the information.

Stav: dobrý (použitý), hĺbka vŕtania: 1 500 mm, dĺžka posuvu os X: 2 000 mm, dĺžka posuvu osi Y: 1 300 mm, dĺžka posuvu osi Z: 1 500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping for heat exchanger base plates and headers Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 liters Chip conveyor: 2,000 x 1,200 mm, discharge height Milling tool changer tower with 20 positions ELB Drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates all axes: 15,000 mm/min (X, Y, W, Z) Operating (cutting) hours: approx. 15,000 Comprehensive tooling package Todpfev A Uw Dex Agvjc Specifications Metric Max. drilling diameter in steel: 40 mm Drilling depth: 1,500 mm X-axis: 2,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm W-axis: 750 mm Table load: 15,000 kg Table size (L x W): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Approximate dimensions Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute any representation or contractual terms. We recommend verifying all critical details.

Stav: použitý, Rok výroby: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight: approx. 12.5 t Space requirements: approx. m T B T CNC-controlled horizontal "deep boring machine" Type: BWP 250 Todot Hw Ayspfx Agvsc Year of manufacture: 1996, but mechanically and electrically overhauled in 2006 _____ Working area: • X-axis (drill slide column): approx. 2,000 mm • Z-axis (drill slide travel): approx. 1,200 mm • Drilling depth with 2 steadies: approx. 1,000 mm • Y-axis (drill slide vertical): approx. 1,100 mm Table clamping surface: 1,200 x 2,000 mm Drilling capacity - solid material: approx. Ø 4 - 25 mm Tool holder: HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feeds/rapid traverse for Z/X/Y axes: • Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive output: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive: approx. 30 kW - 400 V - 50 Hz Weight: approx. 10,000 kg Accessories / Special equipment: • Ideal machine for complete machining of large workpieces, mold tools, and plates, etc., using deep hole drilling Ø 25 x 1,000 depth, milling up to Ø 65, slot milling up to Ø 30, spiral drilling / boring up to Ø 30, countersinking and thread cutting up to M24 x 3. • SIEMENS 840 D 4-axis CNC control system with process monitoring, etc. • GAMFIOR high-frequency drilling spindle with stepless spindle speeds. • Pneumatically applied (200 mm) drill bushing holder, 2-way swiveling. • Fixed 12-position tool changer by MIKSCH Type CTM 40 with 800 mm travel stroke for holding twist drills, milling cutters, and taps. The changeover from ELB deep hole drill bits to standard tools is manual. • The table is fixed, designed for heavy workpiece loads and precise drilling. • Mounted on the table: FIBRO CNC rotary table Type RTN 400 = 420x420 mm as B-axis. • For mounting on the table, there is a hydraulic FIBRO rotary table Ø 1,000 mm for divisions of 3 - 144 or angle increments 2.5 – 120° • Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters. • 2 steadies for supporting deep hole drill shafts. • Complete work area enclosure with lateral and front access. Condition: Very good – truly a rare opportunity, will soon be available for demonstration under power. Delivery: Ex stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Stav: dielensky repasované (použité), - Priemer vŕtania 5~25 mm - Hĺbka vŕtania 1500 mm - Koník - Nádrž - Čerpadlo Tsdehuil Rjpfx Agvec - Filter

Stav: pripravené na použitie (použité), -Priemer vŕtania 5~25 mm -Hĺbka vŕtania 1000 mm -Koník -Nádrž -Čerpadlo Tedsdgpltspfx Agvoc -Filter

Stav: neskontrolované (použité), Rok výroby: 1970, - Priemer vŕtania 5-30 mm - Hĺbka vŕtania 750 mm - Filter - Čerpadlo Tjdpfxexzz He Agvec

Stav: dobrý (použitý), - Priemer vŕtania: 5–30 mm - Hĺbka vŕtania: 750–900 mm - Úprava podľa požiadaviek zákazníka Tjdpfx Agj Dcz Devsc

Stav: dobrý (použitý), Rok výroby: 1979, TBT T30-4-750/1000 - Drilling diameter approx. 30 mm Todpod Ri H Ejfx Agvjc - Drilling depth 750 mm / extension approx. 1000 mm - Tank - Pumps - Loading device - Tailstock