Hydraulický lis

Hidralmac 500T Säulenpresse

Stav: použitý, Rok výroby: 2016, číslo stroja/vozidla: 4303, Pressure: 500 t Clear passage width: 2,100 x 1,500 mm Stroke: 1,000 mm Total power requirement: 62 kW Giodpfx Aodyynveftjl Approx. machine weight: 39 t Dimensions L x W x H: 5,100 x 2,800 x 4,040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter (main cylinder): 360 mm Table size: 2,100 x 1,500 mm with T-slots Ram size: 2,100 x 1,500 mm Table height above floor (approx.): 850 mm Forward speed: 300 mm/sec Return speed: 300 mm/sec (with 20T ram weight) Pressure phase speed: 28 mm/sec at 200T Oil tank: approx. 1,000 l Auxiliary cylinders: 2 units Column diameter (auxiliary cylinder): 120 mm Overall table plate size: approx. 2,750 x 1,600 mm Overall ram plate size: approx. 2,750 x 1,600 mm Pressure phase speed: 20 mm/sec at 300T Pressure phase speed: 6 mm/sec at 500T Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance work table–ram plate): 1,500 mm Hydraulic block: REXROTH Pressure control: via PLC (minimum pressure 50T) Cylinders: 4 x ?90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector forward speed: 95 mm/sec Ejector return speed: 240 mm/sec Capacity: 4 x 15T at 250 bar Pressure adjustment: via monitor, 50–500T Pressure holding time: 0–900 sec Hydraulic tank: 2,000 l Control system: Siemens S7 300 Memory capacity: 200 programs Electronics from German manufacturers: SIEMENS / MÖLLER Control panel: on swing arm Light sensors Sick: 1,500 mm (front) Control functionality: The linear scale continually communicates the position of the ram and ejectors to the controller. Travel path, upper limit, and switching position where the press changes from idle stroke to working speed, as well as the target end position, can be set easily and quickly via the monitor control. The working speed can be regulated in 1 mm/s increments from 0 to 10 and in 10 mm/s increments from 10 to 300 mm. The machine includes a pressure monitoring system that either raises the ram when the set pressure is reached, or holds pressure constant for the set time (within 5% tolerance) before opening. The controller monitors secured areas, the entire hydraulics, the pumps, and temperature. Additionally, it synchronizes the main cylinders and compensates for uneven loads. The control is housed in a separate cabinet. Actual press operation occurs via a control panel mounted on a swing arm, reducing operator travel distances. Additional equipment: - 8 mm polycarbonate glazing inside rear door - 8 mm polycarbonate glazing in the side doors and working area - Liquid channel (25 mm radius) at front, rear, and sides of the table Special features of the press: - Including 10% reserve (maximum capacity 550 t) - Steel grade: stainless steel LCG ASTM A36, manufactured according to DIN 8651 - Motor and pump shut down once the tool is closed and automatically adjust for 5% pressure loss (major cost savings) Nitrogen compression unit: A nitrogen compression unit is included, generating a sudden pressure of 280 bar, with on/off capability.

Stav: dobrý (použitý), Rok výroby: 2003, Hlavné vreteno: Rozsah otáčok hlavného vretena: max. 6 000 ot./min Výkon pohonu hlavného vretena: 16 kW Maximálny krútiaci moment: 155 Nm C-os: 360° Revolverová hlava: Počet pozícií náradia: 12 pozícií Počet poháňaných staníc: 12 pozícií Rozsah otáčok poháňaných nástrojov: max. 5 000 ot./min Výkon pohonu poháňaných nástrojov: 10 kW Upnutie nástroja: (VDI 30) Driek nástroja: 20 x 20 mm Pohybové osy: X-os: 160 mm Z-os: 450 mm Posuvy: Rýchloposuv X: 60 m/min Rýchloposuv Z: 45 m/min Posuvová sila X: 2,5 kN Posuvová sila Z: 4 kN Rýchloposuv C: 200 ot./min Maximálny krútiaci moment C: 155 Nm Celkový príkon Hmotnosť stroja cca: 3,7 t Potrebný priestor cca: 4,5 x 2,5 x 2,5 m Gijdpfx Afjv Drigjtsl Ovládanie Heidenhain Dutý upínací valec C-os a pohon nástroja Dopravník triesok Odlučovač olejovej a emulznej hmly s elektrostatickým filtrom

Rok výroby: 2002, Stav: veľmi dobrý (použitý),

Stav: použitý, Rok výroby: 1988, Funkcionalita: neoverené, Berstorff valcová stolica 400 x 900 mm Gjdsr A Dfyopfx Afteil Viac informácií nájdete v priloženom popise!

Stav: použitý, Veľkosť stola: 900 x 460 mm Os X/Y/Z: 600/400/420 mm Otáčky vretena: 20-4000 ot./min Kužeľ vretena: ISO 40 Hydraulický pohon nástrojov Zásobník nástrojov s 32 stanicami Vŕtací posuv vo vertikálnej hlave: 75 mm Naklápateľná vertikálna hlava: +/- 90° Ovládanie: Gedpfxol Dvx Eo Afteil Heidenhain TNC 407 Vybavenie: Stolová svorka 19 držiakov nástrojov Chladiaci systém

Stav: pripravené na použitie (použité), Rok výroby: 2005, prevádzkové hodiny: 52 455 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 2501-0154, dĺžka sústruženia: 600 mm, sústružnícky priemer nad priečnym suportom: 140 mm, sústružnícky priemer: 300 mm, výkon motora vretena: 25 000 W, otáčky vretena (min.): 5 000 ot./min, maximálna rýchlosť vretena: 5 000 ot./min, zdvih osi Z: 900 mm, rýchloposuv os X: 3 m/min, rýchly posuv osi Y: 3 m/min, rýchloposuv osi Z: 3 m/min, otáčky (max.): 4 000 ot./min, otáčky (min.): 4 000 ot./min, krútiaci moment: 239 Nm, prechod tyče: 80 mm, posuv osi X: 165 m/min, posuvová rýchlosť osi Y: 165 m/min, posuvová rýchlosť osi Z: 220 m/min, celková hmotnosť: 10 500 kg, Výbava: dokumentácia / manuál, Stroj je stále v provozu a lze jej vidět v chodu u společnosti VOVU Machining v Udenu. Celkem je zde k dispozici 6 identických strojů. Ovládání Fanuc 310is. Gsdpeur Hfzjfx Aftjil

Stav: použitý, Rok výroby: 1965, Cylinder diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total connected load: 6 kW Machine weight approx.: 2.6 t Max. honing diameter: 10–100 mm Max. honing depth approx.: 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85 – 300 rpm and 170 – 600 rpm Stroke speeds, steplessly hydraulic: 0 – 23 m/min Spindle drive: 2 kW Total drive approx.: 6 kW – 380 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • Mounted 2-station swing table for holding 2 workpieces with mechanical clamping via hand lever. • Hydraulic tool feed • Shut-off via timer control, presumably with air measuring device. • Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Godpfst Hwupjx Aftjil We look forward to receiving your order. Further honing machines are constantly in stock, please enquire.

Stav: nový, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Simply let us know your needs, and we will prepare an attractive offer including installation and service. In recent years, ISGEC has supplied equipment to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and more than 200 presses to 40 Japanese customers. We are proud to have been the official distributor since 2020 and look forward to hearing from you. Gsdpfx Afjf Rt Iretjil

Rok výroby: 1999, Stav: použitý, Tractive force - max. 6.0 t Ram stroke - max. 1250 mm Gijdpod Il A Nsfx Aftsl Space requirement approx. 1.20 x 1.20 x 3.25 m

Rok výroby: 2006, Stav: generálne opravený (použitý), HYDRAULICKÝ LIS MECAMAQ TLAK: 350 t ZDVÍH: 350 mm STŮL VLEVO-VPRAVO: 600 mm STŮL VPŘED-ZAD: 750 mm VÝKON: 15 kW Rozměry: Giodpfxefmqqlo Aftsl Výška: 2,9 m Šířka: 1,9 m Délka: 1,3 m Hmotnost: 5 700 kg