Ukážkový lis

Hidrobrasil Tuschierpresse

Pressure: 200 t
Table length: 2500 mm
Table width: 2000 mm
Maximum stroke: 2050 mm
Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm
Retraction force: 25 t
Machine weight approx. (without operating fluids): 50 t
Column diameter: 210 mm
Table swivel speed: 25 mm/sec
Table extendable: 2000 mm
Movable table speed: 30 mm/sec
Max. table load: 15 t
Drive power: 20 kW
Adjustable working speed: 1 - 10 mm/sec
Approach speed: 10 mm/sec
Return speed: 25 mm/sec
Rapid traverse speed: 10 mm/sec
Oil tank: 400 l
Oil cooling (electric): 1.5 kW (max)
Gijdpfx Ajfxyi Dsamep
Platform height: 650 mm
Table height: 800 mm
Ram height: 850 mm
Control system Siemens: S7 1200
Monitor: WEG 12"
Hydraulics and tank on top of press: 10,200 ?
Perimeter maintenance balcony: 5,000 ?
Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ?
Two controlled hydraulic inputs and outputs: 1,000 ?
Rotatable (up to 180°), electrically driven table: 18,000 ?
Protective fence around working area: 1,500 ?
Table plate tiltable by 75°: 12,000 ?
Upper tool foldable: 170°
Swivel table: 75°
Table tiltable: 75°
Ejector with 60T in ram center: 12,000 ?
Ram plate foldable by 180°: 14,000 ?

Functionality of the spotting press:

Control operation modes:
The control offers the modes "Manual" and "Semi-Automatic".

In manual mode (joystick operation), you can:

- hydraulically extend and retract the table at max. 30 mm/sec
- hydraulically tilt the table at max. 25 mm/sec to the set degree
- lower the ram plate hydraulically and fold it down by 90° up to 180°
- operate the machine in pressureless mode
- set the pressure via the monitor
- adjust the speed from 1 to 10 mm/sec
- actuate an additional hydraulic cylinder (core pull, etc.) located on the tool

In semi-automatic mode, you can:

- move the ram at up to 10 mm/sec in idle travel
- run a program previously entered on the monitor.
Example:
30 T pressure
Upper stop point 300 mm
Lower maximum stop point 900 mm
Speed changeover point 850 mm
Idle travel at 10 mm/sec
Pressing speed from 850 mm only 10 mm/sec
Pressure holding time after reaching set pressure or BDC 1 second
Return to upper stop point

Joystick function:
The lever can be pulled (downward movement) or pushed (upward movement). The stronger the pull or push, the faster the machine operates. 1 to 10 mm/sec in downward mode and 1 to 25 mm/sec in upward mode are possible.

Monitor view:

The large touchscreen monitor displays the ram position, set pressure, and current speed at any time.

In semi-automatic mode, all cycle values are visible. They can be saved or reloaded.

The control panel consists of the two-hand operation, the joystick, the emergency stop, and the selector switch between:

- Extend/retract table (two-hand operation is enabled)
- Tilt/lower table (two-hand operation is enabled)
- Raise/lower ram (joystick is enabled)
- Lower/raise ram plate (two-hand operation is enabled)

Inzerát bol automaticky preložený. Chyby v preklade sú možné.