Ohýbací stroj

JUTEC 6000D

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND INSTALLATION The compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm both stationary and directly on site. A powerful three-phase motor and a precision gearbox ensure a strong drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle setting is quick and easy via a user-friendly, menu-guided touchscreen interface, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each supporting a series of up to eight bends per geometry. The multifunctional control system allows variable adjustment of the bending speed for forward and return motion, and offers a parameterizable overbend function to compensate for material spring-back. With the help of four material curves, the material is automatically overbent to the required bending angle, achieving precise bending results. The principle of “stationary tube and rotating tool” ensures the machine requires minimal floor space during operation. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation, for example in stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. The KBV small bending device attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating engineering TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400V • Min/max bending radius: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunction machine control, bending angle setting (0.1°) • Maximum bending angle 240° • 40 mm hexagonal shaft for fast tool changes • Safety foot switch with emergency stop Hjdpfxeng Ax So Aamofd • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, and round bars up to max. 20 mm • Roller bender RB43 – attaches to the hex shaft on the bending axis. By switching to continuous bending, the bending system acts as a drive unit. • Small bending device KBV • Special tools on request OUR ON-SITE SERVICE FOR YOU: • Test production welcome at our on-site demo room • Consultation and information session at your location • Advice and handling for leasing/finance purchase • Trade-in of your current machine • Service contracts, on-site maintenance

Stav: nový, Rok výroby: 2025, NADSTAVEC NA OHÝBANIE PROFILOV PB20 Ideálnym doplnkom pre ohýbanie rúr na modeloch 3000 a 6000 je nadstavec na ohýbanie profilov PB20. Zariadenie je možné jednoducho a rýchlo nasadiť na hriadeľ ohýbačky bez potreby použitia náradia. Obrábaný kus je upnutý na otočný tanier so zvernými čeľusťami a ťahaný okolo ohýbacieho nástroja. S týmto systémom je možné presne zmerať a opakovateľne ohýbať dĺžky ramien s využitím dorazu. TECHNICKÉ ÚDAJE: • Ohývacia kapacita oceľ 37: 100 x 10 mm, Ø 20 mm • Dostupné mnohé štandardné nástroje • Možnosť špeciálnych nástrojov • Nástroje na ostré hrany s ohýbacím rádiusom R2 alebo 5 mm • Okrúhle nástroje R 10 až 25 mm pre ohyby max. 260°, voliteľné Hfodpsnh R Eksfx Aamsd NAŠE SLUŽBY: • Možnosť testovacej výroby v našich priestoroch v demo miestnosti • Konzultačné a informačné stretnutie priamo u vás • Konzultácia a realizácia financovania/leasingu cez spoločnosť JUTEC • Možnosť odkúpenia vašej aktuálnej stroja protihodnotou • Servisné zmluvy, údržba priamo u vás

Stav: použitý, Funkcionalita: plne funkčný, celková hmotnosť: 310 kg, Hmotnosť: 310 kg Rozmery: 900x700x1550(v) mm Výkon motora: 3 kW Plný štvorcový profil: 20x20 mm Plný okrúhly profil: priemer 20 mm Madlo: 60x12 mm Hjdpfx Aox I Rdijamsfd

Stav: ako nová (výstavný stroj), Predvádzacia dvojitá pokosová studená okružná píla na kov s 350 mm kotúčom. Rozsah rezu: Okrúhle/Obdĺžnikové 90°: 120/140x100 mm Okrúhle/Obdĺžnikové 45° vpravo a vľavo: 100/100x100 mm Otáčky: 18/36 m/min Ďalšie technické údaje nájdete v PDF dokumente. Technické údaje a rozmery s výhradou chýb. Hfjdpfx Aopgmngjamed

Stav: nový, Rok výroby: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a vise. The drive is operated via a screw-in handle. A lockable setting ring ensures repeatable bends. The plug-in tools can be changed with exceptional ease. The "stationary tube and rotating tool" principle allows for bending in the smallest of spaces. For thin-walled tubes, sliding shoes are used for crease-free bending, producing bends with minimal deformation in materials such as stainless steel and copper tubes. The optional version with hexagonal fitting allows use not only in a vise, but also with the drive systems of the 3000 and 6000 bending machines. To do so, the KBV is simply mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototyping • Sanitary and heating installations TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter Hfjdpong Amkefx Aamod • Maximum bending result 180º OPTIONAL ACCESSORIES: • KBV with hexagonal fitting for use on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Test production in our in-house demonstration room • Consultation and information session at your premises • Leasing/financing purchase advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stav: použitý, Engine power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you, subject to prior sale and errors excepted, from stock and without obligation: DECKEL Universal Milling Machine with FAGOR 3-Axis Digital Readout Type FP 3 Year of construction Serial No. Table travels: longitudinal motor/manual 490 / 500 mm vertical motor/manual 370 / 380 mm transverse motor/manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Distance under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feeds 10 – 500 mm/min Rapid traverse 1,500 mm/min Hfjdpfx Aasv Nq Skemjd Spindle drive 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special Equipment • FAGOR 3-Axis Digital Readout V 300 (glass scales) with extended functions such as bolt-hole circle, absolute measurement, mm/inch switch, etc. • Movable DECKEL universal vertical milling head, swivel range +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various distance rings, driver, clamping devices, operating tools, etc. • DECKEL large fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect division, various index plates • Attach-able manual DECKEL universal rotary table Ø 380 mm with direct and indirect division, various index plates • Coolant system, chip tray, central lubrication, separate control cabinet, operating manuals Condition : Very well maintained! Ideal machine for training workshops or small batch production!! Please click here for a video of the machine: FP3/4 Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please ask us!

Stav: pripravené na použitie (použité), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, maximum total tool height: 78mm, bending force: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy for bending, rotating, and feeding: +/-0.05mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16kg, maximum reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Included are a suspended magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station, and worktable. Documentation available. On-site inspection possible. Hfjdpfxjwwlkio Aamsd

Stav: pripravené na použitie (použité), Priemer pílového kotúča: 300 mm Rezací rozsah pri 90° okrúhle: 100 mm Rezací rozsah pri 90° obdĺžnik: 90 x 90 mm Rezací rozsah pri pokose 45° obdĺžnik: cca 40 x 120 mm Otáčky pílového kotúča: 33/66 ot./min Hodpel Ra Uiefx Aamjfd Pohon motor: 380 V, cca 1,3 kW Potrebný priestor: 850 x 600 x 1600 mm

Stav: nový, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Hsdpfed Ab H Nex Aamofd Width: 850 mm Height: 1200 mm Weight approx.: 1000 kg Technical data: - Welded frame made of steel construction - 3 rolls are driven - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital displays (2 pieces) Options: - Standard digital display - NC unit 7 Screen EURO 9,000,-- HPK 50 file Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.91 1/2”x2.77 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* *Special washer (spacer) may be required / Only with special beam bending device • Capacities apply for 260 N/mm² plate yield strength

Stav: nový, Rok výroby: 2026, Mandrelless Tube Bending Machine RB 54 – NC-controlled, with Large Program Memory Item Number: 4300054 NC control for setting the bending angle Up to 50 programs storable High-quality, robust construction Fast tool change Fully motorized drive Automatic return to the starting position TECHNICAL DATA General Information Max. bending radius: 162 mm Max. bending angle: 210° Bending speed(s): 2 rpm Torque: 2341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Weight (net, approx.): 107 kg Bending Capacities Bending capacity for tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity for tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity for tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor power: 1.1 kW Supply voltage: 400 V Mains frequency: 50 Hz Hfjdpfx Aajvk Scgjmed Location: ex-stock - immediately available -