Pracovná plošinová náves

KÄSSBOHRER Mega Tele HD Plattform Auflieger mit Radmulden

Stav: nový, maximálna hmotnosť nákladu: 37 581 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 15 850 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, Factory-new Kässbohrer Mega Tele HD Platform Semi-Trailer with Wheel Wells TECHNICAL INFORMATION: Ffjdpfx Aetn Hlmsgqew - Fifth wheel height: 950 mm - Total external length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension lock positions: 500 mm - Gooseneck height: 120 mm - Platform height (laden): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons - Total width: 2,550 mm - Gross technical weight (80 km/h): 48,000 kg - Gross technical weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed front axles, 1x rear trailing steering axle - Air suspension incl. load gauge - Wabco braking system - Tyres: 12x 245/70 R17.5 CHASSIS: - Chassis made from high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear support winders with 50 ton capacity - Mechanically folding rear supports with 45 ton capacity - Wheel wells dimensions: 420 mm deep, 800 mm wide, - suitable for max. tyre diameter 1,800 mm RAMP: - Ramp holders at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft., 1x40 ft. or 1x45 ft. + 4 twist locks - Steel front wall, 1,500 mm high, with Code-XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box for 18 stakes - 1x rotating beacon - Wheel well bridge for closing the wheel wells - Ramp box Chassis color: Nova grey For further information, feel free to contact us.

Stav: dobrý (použitý), Renault 270 DCI crane truck, 19 tonnes. Year: 2002. 470,000 km. Engine replaced with a remanufactured unit at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: OK. No remote control for the crane. Fedpfx Ajrhzy Hogqefw

Stav: dobrý (použitý), Rok výroby: 2011, - Fully automatic timber infeed with feed roller conveyor - Extension of infeed cross conveyor and feed roller conveyor for timber lengths up to 13 m - Infeed and loading cross conveyor - Under-table swivel cross-cut saw - Universal 4-axis milling unit (UF4) - Combination support for vertically operating tools - 2.2 kW drilling unit - Combination support for horizontally operating tools - 2.2 kW drilling unit - Longitudinal and transversal groove milling - Marking device at the rear (stop side) - Fully automatic beam turning station – hydraulic - Transport and positioning system "two-hand operation" - Electronic control with EKP software - Outfeed roller conveyor for timber incl. extension (without drive) - Workpiece ejector Fedpfx Aewuppwogqofw - 5-arm timber deposit rack - Safety devices and guarding

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: ZCFC635C805516960, najazdené kilometre: 80 000 km, výkon: 132,39 kW (180,00 k), prvá registrácia: 01/2023, typ paliva: nafta, maximálna hmotnosť nákladu: 750 kg, veľkosť pneumatiky: 195/75 R16C 110/108R, rázvor náprav: 4 100 mm, energetická účinnosť: D, farba: biely, emisná trieda: Euro 6, počet sedadiel: 3, dĺžka ložného priestoru: 4 100 mm, šírka ložného priestoru: 2 100 mm, výška ložného priestoru: 400 mm, Rok výroby: 2022, počet predchádzajúcich vlastníkov: 1, Výbava: ABS, airbag, celoročné pneumatiky, centrálne zamykanie, hmlové svetlá, klimatizácia, palubný počítač, posilňovač riadenia, sadzový filter, tempomat, žeriav, SERVISOVANÉ VÝHRADNE V AUTORIZOVANÝCH SERVISOCH IVECO. K DISPOZÍCII NA SKÚŠOBNÚ JAZDU. ZÁRUKA OD 12 DO 48 MESIACOV ZA VÝHODNÚ CENU. Euro 6D Automatická prevodovka HI-MATIC s 8 stupňami Ffsdpfx Agow Ducujqsw 3 miesta v kabíne Vodičov airbag Odpružené a vyhrievané vodičovo sedadlo Manuálna klimatizácia Hmlové svetlá Autorádio s Bluetooth, DAB a ovládaním na volante Adaptívny tempomat Asistent núdzového brzdenia Pevná valníková nadstavba Žeriav Copma 35.3 s 3 hydraulickými výsuvmi Predný držiak na stĺpy Zadný odnímateľný držiak na stĺpy Navijaky na upínanie lana Zosilnené perá podvozka

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg Fsdpforgzv Njx Agqefw * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: veľmi dobrý (použitý), najazdené kilometre: 117 563 km, typ paliva: nafta, farba: červená, zdvíhacia výška: 36 500 mm, prvá registrácia: 05/2015, typ stožiara: teleskopický, Rok výroby: 2015, = Ďalšie možnosti a výbava = - PTO (vývodový hriadeľ) = Ďalšie informácie = Fjdpfx Aeuxu Dysgqsfw Všeobecné informácie Účel použitia: Stavebníctvo Technické informácie Počet valcov: 6 Objem motora: 6 374 cm³ Pohon: kolesový Rozmery (d x š): 1103 x 255 cm Funkčné Dĺžka stožiara: 35,2 m Nosnosť: 40 000 kg Značka nadstavby: TADANO ATF 40G-2 Označenie CE: áno Stav Technický stav: veľmi dobrý Optický stav: veľmi dobrý TADANO ATF 40G-2 ŽERIAV SPODNÁ ČASŤ: 279 k POHON 4X4 117 563 km AUTOMATICKÁ PREVODOVKA KLIMATIZÁCIA CHLADNIČKA VEĽKOSŤ PNEUMATÍK 445/95/R25 MOTOR MERCEDES-BENZ OM 906 LA HORNÁ ČASŤ: KÚRENIE 3 RÁZOVÉ DREVOBLOKY 20T 1 RÁZOVÝ DREVOBLOK 10T MIN/MAX DĹŽKA VYSÚVACIEHO RAMENA: 10,5 m / 35,2 m MAX NOSNOSŤ: 40 000 kg MAXIMÁLNA VÝŠKA HÁKU: 36,5 m KOMPLETNÉ ZÁVAŽIE VŠETKY DOKLADY A PAPIERE K DISPOZÍCII CE CERTIFIKÁT SLEDUJTE NÁS NA INSTAGRAME: GEURTSTRUCKS HOVORÍME PO NEMECKY HOVORÍME PO ANGLICKY HOVORÍME PO ŠPANIELSKY

Stav: použitý, Rok výroby: 2003, Funkcionalita: plne funkčný, číslo stroja/vozidla: 11441, V súčasnosti pracujeme s nasledujúcou verziou: 9.23.12.102733-12 Vybavenie K2 zahŕňa: 4-osá univerzálna frézka, 2 vŕtacie rámy, spodný prstový fréz, drážkovačka, hydraulická stanica na otáčanie nosníkov. Fjdpfxjwvih Ae Agqefw Stroj je plne funkčný, je možné si ho obzrieť po dohode. Dostupný od 30.11.2025. Demontáž a nakládka na nákladné auto v našej firme je zahrnutá v cene. Predaj ako použitý stroj bez akejkoľvek záruky.

Stav: veľmi dobrý (použitý), Rok výroby: 2005, Funkcionalita: plne funkčný, Hundegger Speed Cut SC1 CNC Rok výroby 2005, v dobrom technickom stave, hľadá nového majiteľa. Vynikajúci na výrobu strešných väzníkov s plechovými spojmi na klince. Videá zobrazujú stroj v prevádzke. Ffedpfexftaljx Agqow

Stav: použitý, najazdené kilometre: 206 000 km, výkon: 96 kW (130,52 k), typ paliva: nafta, typ prevodu: mechanický, celková hmotnosť: 3 000 kg, prvá registrácia: 04/2016, ďalšia kontrola (TÜV): 02/2027, emisná trieda: Euro 6, farba: biely, počet sedadiel: 9, Rok výroby: 2015, celková dĺžka: 4 963 mm, celková šírka: 2 050 mm, celková výška: 2 254 mm, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, nezávislé kúrenie, 2nd hand since 2018. German minibus. Only original 206,000 kilometres. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 was invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially renewed. - Rear tyres NEW (all-season tyres). - Front tyres as new (all-season tyres, DOT 17/2024). - Last service in November 2024. Auxiliary heater (fully functional). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and external mirrors. Unladen weight "2025-2293 kg" as per registration certificate. Permissible gross vehicle weight: 3,000 kg. Standard registration as a "vehicle for passenger transport up to 8 seats / multipurpose vehicle". Original COC document available. Euro 6. 6-speed manual transmission. The Citroen runs powerfully and very well. This offer is exclusively for businesses, self-employed professionals, farmers, foresters and similar legal entities. Sale to private individuals is generally excluded. Subject to prior sale and error. Net price: €10,500. For export, we reserve the right to retain a security deposit equal to the statutory 19% VAT until we receive the final export proof (export document or confirmation of arrival). Ffodpfx Aov I Idbjgqjw

Stav: použitý, Rok výroby: 2011, prevádzkové hodiny: 3 440 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 91, We are offering this very lightly used Krüsi Krüsimatik G1 with only 3,440 operating hours, year of manufacture 2011. The machine is available immediately. Manufacturer: Krüsi Maschinenbau AG OFFER – KRÜSIMATIC by Krüsi G1 5-Axis System Wood passage: 420 x 200 mm 5-axis saw unit 5-axis horizontal milling unit 5-axis vertical milling unit Drilling unit Chain mortising unit 8m outfeed roller table 8m outfeed roller table Control with cooling unit Compressed air tank Fjdoyfwbnepfx Agqofw Including complete tooling Operating manual 1 used Krüsi Kruesimatic G1 joinery system Year of manufacture: 2011 Can be operated with all joinery software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail cutter Processing direction: right to left 6-sided machining without the need to turn the timber! Weight: 5.5 t BTL controlled for office interface or manual input at the machine. To increase cutting performance, feed speed is frequency controlled and can be optimized for many cross cuts Platform height without floor pit: 920 mm Cut-offs fall into a mobile box, including chips The system only needs to be connected to the electrical cabinet via plugs Max. timber cross section: 200 mm x 420 mm System is set up and ready for demonstration Available IMMEDIATELY The entire system fits on a MEGA trailer Location: 8842 Unteriberg – ready for demonstration. Dismantling / Transport / Installation Auf der Maur GmbH Machine transport Sale ex location Waagtalstrasse 42, 8842 Unteriberg as inspected, without any warranty or guarantee. Payment in full directly upon receipt of invoice, without deduction. The system can only be collected after payment has been received in full. Sold ex location as inspected, without any claim to statutory warranty, guarantee, or liability for defects. "All warranties, insofar as may be legally permissible, are excluded; in particular, rescission and reduction are excluded."