Stroje na ozubenie Karl Klink RW 10 1963

Karl Klink

Stav: dobrý (použitý), Preťahovacia / brokovacia stroj KARL KLINK RSI 2,5 EH Gjdpfjymz N Ejx Agljua -Rok výroby: 1965 -Ťahová sila: 2500 kg / (25 kN) -Rýchlosť brokovania: 1 mm/min až 9 mm/min (plynulo nastaviteľná) -Max. zdvih: 800 mm -Max. priemer obrobku: cca 250 mm -Motor: cca 3 kW -Chladiace zariadenie -Ukazovateľ ťahovej sily -Obmedzovač ťahovej sily -Rôzne vodiace puzdrá (viď fotografie) -Stroje nohy Rozmery: DxŠxV 1,1 x 0,7 x 2 metre / Hmotnosť 1600 kg Vyhradzujeme si právo na chyby a nesprávne údaje.

Rok výroby: 1990, stav: dobrý (použitý), Použitý bočný vysokozdvižný vozík Kalmar, zariadenie bolo dobre udržiavané viac informácií na obrázkoch Gjdpfeh Et E Nox Agloua

Stav: dobrý (použitý), Rok výroby: 1980, Info: The machine was installed in a pit! Gedpfx Agsydlq Ioloua - Pulling force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connected load: 45 kW - Machine weight: 5,500 kg

Stav: dobrý (použitý), Rok výroby: 2004, - Ťahová sila: max. 160 kN - Zdvíhací zdvih: max. 1000 mm Gedpfx Agsydlqzoleua - Prísunový zdvih nástroja: max. 630 mm - Šírka stolovej dosky: 630 mm - Rýchlosť obrábania: 10 m/min - Rýchlosť spätného chodu: 23 m/min - Inštalovaný výkon: max. 88 kW - Hmotnosť stroja: 12 410 kg

Stav: takmer ako nový (použitý), Gilotína na mrazené mäsové bloky 2 ks nožov na priečne rezanie Gusdpoug Uqtjfx Aglja 2 ks nožov na pozdĺžne rezanie Prierez bloku: 520 x 300 mm Teplota spracovania: > -25 °C Maximálny prietok: 5 000 kg/h Hydraulické zdvíhacie zariadenie Rozmery stroja v cm: Šírka: 110,0 Dĺžka: 240,0 Výška: 190,0 Inštalovaný výkon: 6,0 kW Napätie: 400 V, 50 Hz

Stav: pripravené na použitie (použité), Rok výroby: 2012, K dispozícii je zvislý vnútorný protahovací stroj (protahovacia veža) Karl Klink so zdvíhacím stolom a nakladacím portálom. Protahovacia sila: 63kN, protahovací zdvih: 1000mm, zdvih vretena: 400mm, protahovacia rýchlosť: 7,5m/min, spiatočná rýchlosť: 24m/min, stanice: 1, šírka stola: 500mm. Rozmery stroja X/Y/Z: cca 3700mm/3000mm/3200mm, hmotnosť: cca 3500kg. Dokumentácia je k dispozícii. Obhliadka na mieste je možná. Gujdpfx Ajxwcvmsglja

Rok výroby: 1960, stav: generálne opravený (použitý), číslo stroja/vozidla: 1733, Vertikálna vnútorná protahovačka so spínacím tanierom od firmy Karl Klink Typ: RSI10DT Výrobné číslo: 1733 Rok výroby: 1960 Hmotnosť: 4,9 t Protahovacia sila: 10 000 kg So spínacím tanierom (2 stanice) Gsdpfegyd S Sex Agleua Elektrické napájanie: 380 V / 50 Hz Menovitý prúd: 35 A Príkon: 7,5 kW Stroj je kompletne renovovaný a nachádza sa vo veľmi dobrom stave.

Rok výroby: 1965, stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2549, General / Technical Data: Gusdpotuuvzofx Aglja Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broaching stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Acceptance in the pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Workpiece diameter: max. approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Oil capacity: Hydraulic approx. 450 L / Coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (without work area) Power supply: 380 Volt 50 Hz Connected load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine includes an integrated coolant and cutting fluid system • The machine is equipped with a manually operated tool feeder • The broaching slide with draw head mount is guided flat on both sides • The machine is fitted with adjustable pull force limitation • Pull force display Accessories: • 1 universal draw head for flat shanks up to max. approx. 40 mm width • Indexing device (see pictures) • Various special arbors and clamping devices • Machine documentation Remarks: The machine is designed for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and the robust broaching tool feeder, it is very well suited for heavy-duty profile broaching tools. The machine is used and in condition appropriate to its age. The machine is available for inspection at our warehouse. It is newly added to our stock and has not yet been refurbished technically or visually. Draw heads for profile broaching are available upon request, depending on DIN standard, dimension, and stock availability.

Rok výroby: 1960, stav: použitý, maximálna ťažná sila: 20 000 kg maximálny zdvih: 1250 mm Guedpfx Ageui Sbelsa maximálna rýchlosť rezania: od 1 m/min do 7 m/min maximálna spätná rýchlosť: od 5 m/min do 25 m/min maximálny priemer obrobku: cca 140 mm maximálny priemer nástroja: cca 50 mm vyťahovacie stanice: 2 kusy Stroj je vybavený okružným otočným stolom s dvoma pracovnými pozíciami. Stroj je vybavený automatickým podávačom nástrojov a je určený pre ručnú sériovú výrobu. Uzatváranie nástroja v ťažnej lište ako aj v zásobníku nástrojov sa vykonáva mechanicky cez pružinový mechanizmus (ťahacia hlava podľa DIN 1417).

Stav: použitý, Rok výroby: 1990, max.: ťahová sila 25 000 kg max.: dĺžka nástroja 3 520 mm max.: rýchlosť rezu 9,6 m/min priechodná šírka: 520 mm Stroj obrábal ojnice a viečka ojníc. Stroj je navrhnutý na sériovú výrobu (výkon: 400 kusov/hod.) Godpscm Eiwsfx Agloua

Stav: pripravené na použitie (použité), Rok výroby: 2008, Sústruh CNC Ernault Somua 1400x8000 CNC systém Fanuc 21i TB Maximálny sústružený priemer 1400 mm Maximálna dĺžka obrobku 8000 mm Maximálny priemer sústruženia nad priečnym suportom 1100 mm Priemer vretena 235 mm Maximálna hmotnosť obrobku 25 000 kg Guedpsyly Nbofx Aglsa Výkon motora 75 kW Video stroja v prevádzke k dispozícii!

Rok výroby: 1951, stav: dobrý (použitý), číslo stroja/vozidla: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine no.: 1133 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Gjdpfx Aedcdrpjgloua Broaching stroke: 1,500 mm Broaching positions: 1 piece Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Through hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant / cutting fluid system • The machine features an oil and chip tray with a tool feed carriage Remarks: The machine is ideal for manufacturing keyways and profiles. The machine runs smoothly and is clean in the guidance and cylinder areas. Broaching needles and broaching mandrels can be supplied upon request. The machine is available for inspection, powered, and ready for demonstration at our warehouse.

Rok výroby: 1964, stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically adjustable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically adjustable, stepless from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380 Volt, 50 Hz Gujdpfxet Dv I Aj Aglea Accessories / Special features: The machine is equipped with a workpiece table that has 3 boreholes for 3 broaching stations. The tool clamping system is designed as a spring-actuated locking mechanism in the drawbridge and as a hydraulic-mechanical system in the feed system. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation pit or, alternatively, a platform. Draw heads and puller needles are available on request. The machine is available for inspection at our warehouse.

Stav: pripravené na použitie (použité), Rok výroby: 1998, celková hmotnosť: 2 900 kg, výkon: 8 kW (10,88 k), vstupné napätie: 380 V, počet broachovacích poloh: 1, celková šírka: 6 100 mm, celková výška: 1 900 mm, Manufacturer: Karl Klink Gsdpfx Agjxtcz Ijleua Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in ready-to-use condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm width Through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / Rated power: 380V 50Hz / 8.0 kW Accessories / Special features: • Machine features manual-hydraulic control for broaching stroke movement • Integrated coolant and cutting fluid system • Simple, external oil drip tray on the machine bed, without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching needles as well as broaching mandrels and pull heads can be supplied.

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 1966, celková hmotnosť: 7 000 kg, vstupné napätie: 380 V, dĺžka protahovania: 1 500 mm, počet broachovacích poloh: 3, priemer obrobku (max.): 575 mm, celková výška: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching stations: 3 units Distance between broaching stations: 2 x 145 mm Pull head mounting diameter: 3 x Ø 85 mm Clearance between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder in raised position) Power supply / connection load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a worktable featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the pull bridge and the feeder. The machine features an integrated coolant system. Remarks: The machine is designed for series production; for optimal use, ideally a foundation (pit) is required, or alternatively a platform. Pull heads and ejector needles are available on request. The machine can be inspected under power at our warehouse. General Information: We consistently stock a wide range of approximately 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg, both horizontal and vertical models. Many of the broaching machines in stock are ready for demonstration. If required, we can also offer used equipment such as pull heads, ejector needles, broaching tools, and other specific accessories. Guodpfxjwql Rve Aglja As a contract broaching company with over 50 years of experience, we are also able to assist you with technical questions regarding broaching technology.